Canarm IFM779B13 Handleiding

Bekijk gratis de handleiding van Canarm IFM779B13 (2 pagina’s), behorend tot de categorie Verlichting. Deze gids werd als nuttig beoordeeld door 2 mensen en kreeg gemiddeld 4.1 sterren uit 4 reviews. Heb je een vraag over Canarm IFM779B13 of wil je andere gebruikers van dit product iets vragen? Stel een vraag

4. Secure the fixture to the

nipple tightening by star

washer and hex nut. Screw the

finial to the nipple.

5. Install the proper bulb type

and wattage (not included).

INSTALLATION:

FLUSH MOUNT

1. TURN OFF ELECTRICAL POWER BEFORE STARTING INSTALLATION OF LIGHT FIXTURE.

DO NOT REMOVE INSULATION FROM FIXTURE.

2. THIS PRODUCT MUST BE INSTALLED IN ACCORDANCE WITH THE APPLICABLE INSTALLATION CODE

BY A PERSON FAMILIAR WITH THE CONSTRUCTION AND OPERATION OF THE PRODUCT AND THE

HAZARDS INVOLVED.

3. CAUTION – RISK OF FIRE. CONSULT A QUALIFIED ELECTRICIAN TO ENSURE CORRECT BRANCH

CIRCUIT CONDUCTOR.

4. CONNECT THE GROUND WIRES (BARE COPPER OR GREEN) FROM YOUR FIXTURE TO THE GROUND

WIRE (BARE COPPER OR GREEN) OR GROUND SCREW IN THE ELECTRICAL BOX.

5. TO CLEAN THE FIXTURE, TURN OFF THE POWER, WAIT FOR IT TO COOL, AND WIPE THE FIXTURE WITH A

CLEAN, SOFT CLOTH.

NOTE: Product may not look exactly as shown in figures.

Tel: (613) 342-5424, Fax: (800) 263-4598

IFM779B13

10/21

Bulb

Phillips

Screwdriver

Wire Cutters

PliersWrench

!

INSTRUCTIONS PERTAINING TO RISK OF FIRE OR INJURY TO PERSONS

READ ALL INSTRUCTIONS

IMPORTANT SAFETY

INSTRUCTIONS

SAVE THESE INSTRUCTIONS

Wiring supplies

as required by

local electrical

code

SAFETY PRECAUTIONS:

TOOLS AND MATERIALS REQUIRED:

Electrical Box Screws

(not included)

Mounting

Bracket

White

Black

House

supply

Ground

wire

Fixture

Ground wire

1. Attach nipple to mounting

bracket. Adjust so it will clear

hole in back of fixture and then

lock nipple in place with hex nut.

Attach mounting bracket to

electrical box with electrical box

screws (not included).

2.Connect the ground wires

(bare copper or green) from

your fixture to the ground wire

(bare copper or green) or

ground screw in the electrical

box. Connect the black wires

from the fixture to the black wire

in the electrical box and connect

the white wires from the fixture

to the white wire in the electrical

box.

3. Once connections of wires

are completed, carefully tuck

wires and wire nuts into the

electrical box making sure no

bare wire (on the black and

white) is visible at the wire nuts.

Nipple

Electrical

Box

Hex nut

Fixture

Fixture

A

Nipple

Hex Nut

Finial

Star

Washer

Product specificaties