Campbell Hausfeld MFD560751P4P Handleiding


Pagina's 24 Niet gecategoriseerd

Bekijk de handleiding van Campbell Hausfeld MFD560751P4P gratis online of download de PDF. Deze handleiding is 0 keer bekeken. Vraag over dit model? Stel een vraag

Electric Motors
Installation, Operation, Maintenance,
and Troubleshooting Guide
SAVE THIS GUIDE FOR REFERENCE: Keep this guide for future reference. Safety
Warnings and Precautions, as well as assembly, operating, inspection, maintenance,
and cleaning instructions are included in this guide.
WARNING: Read and understand this guide before using the product.
Failure to do so can result in serious injury.
MGP56201P2P-CH, MGP56HZ501P2P-CH, MGP56HZ601P2P-CH,
MGP184T751P2P-CH, MFD56051P4P-CH, MFD560751P4P-CH,
MFD56101P4P-CH, MFD145T151P4P-CH, MFD182T301P4P-CH,
MFD184T501P4P-CH, MFD48Z0251P4P-CH
E118511 10/25
© 2025 Campbell Hausfeld, MAT Industries, LLC
2
Please read and save these instructions. Read carefully before attempting to assemble, install,
operate or maintain the product described.
Protect yourself and others by observing all safety information. Failure to comply with instructions
could result in personal injury and/or property damage! Retain instructions for future reference.
Reminder: Keep your dated proof of purchase for warranty purposes!
Attach it to this guide or file it for safe keeping.
Model Number:
Serial Number:
Purchase Date:
If you have any questions or are uncertain about any statement or procedure, or if you require
additional information please contact service at 1-888-895-4549 or www.campbellhausfeld.com
ENGLISH
3
SAFETY INFORMATION
All operations must be carried out by appropriately trained personnel. Protective
eyewear should be worn at all times when around electric motors. Electric motors
have energized circuits and exposed rotating parts, which may cause injury to people.
Electrical shock can cause serious or fatal injury. Installation, operation, and maintenance of electrical
equipment should be performed exclusively by qualified personnel that are trained in the use of
this equipment. Be sure qualified personnel are completely familiar with NEMA publication MG 1,
electric motors and generators, the National Electrical Code, and local codes and practices. Improper
installation or use may create hazardous conditions that could result in serious injury or death.
Read and understand all warning and instructions to help prevent personal injury
or property damage. All possibilities/conditions are not covered in this manual;
therefore, the operator must be able to use common sense and caution, which cannot be built into
the product, when using this product.
1. Be sure that you are completely familiar with NEMA publication MG 1, safety standards for
construction and guide for selection, installation and use of electric motors and generators,
the National Electrical Code and local codes and practices. Unsafe installation or use can cause
conditions that lead to serious or fatal injury.
2. Use correct handling equipment to avoid injury. Use caution when removing the motor from
its packaging. Sharp corners may exist on motor parts.
3. Disconnect power source before connecting motor. Ensure the power source is correctly
rated for the product.
4. Be mindful of moving parts.
5. Do not block air vents, if applicable.
6. Ensure mounting hardware is secure. Check before each use. Vibration during use can cause
these to loosen over time.
7. Do not connect power source to motor unit until the motor is securely mounted.
8. Wiring instructions and motor specs label should be maintained and readable.
9. Do not overload the motor. Verify specifications on the motor label.
10. Wear appropriate PPE for assembly and use of the product. ANSI approved eyewear, hearing
protection, heavy gloves and other appropriate safety devices needed for safe assembly/use.
11. Maintain a safe work environment that is well lit, free from obstructions or deleterious
materials, etc.
12. Do not install motor near flammable chemicals, vapors or dust.
13. Disconnect power before performing any maintenance/cleaning on the motor or equipment
attached to the motor.
14. Before powering motor, ensure all safety guards are secure in place to prevent
accidental contact. Beware of the risk of burns if motor is hot.
15. Do not by-pass or render inoperable any safety devices.
16. Do not allow children or unauthorized persons to handle or use the product.

Beoordeel deze handleiding


Product specificaties

Merk: Campbell Hausfeld
Categorie: Niet gecategoriseerd
Model: MFD560751P4P

Heb je hulp nodig?

Als je hulp nodig hebt met Campbell Hausfeld MFD560751P4P stel dan hieronder een vraag en andere gebruikers zullen je antwoorden