Cameo Q-SPOT 40 RGBW Handleiding

Cameo Lamp Q-SPOT 40 RGBW

Lees hieronder de 📖 handleiding in het Nederlandse voor Cameo Q-SPOT 40 RGBW (80 pagina's) in de categorie Lamp. Deze handleiding was nuttig voor 54 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/80
Q-SPOT 40 RGBW
COMPACT SPOTLIGHT WITH 40W RGBW LED
BLACK HOUSING WHITE HOUSING
CLQS40RGBW CLQS40RGBWWH
USER´S MANUAL
BEDIENUNGSANLEITUNG
MANUEL D´UTILISATION
MANUAL DE USUARIO
INSTRUKCJA OBSŁUGI
MANUALE D´USO
CONTENTS / INHALTSVERZEICHNIS / CONTENU / CONTENIDO / TREŚĆ / CONTENUTO
ENGLISH
SAFETY INFORMATION 3-4
INTRODUCTION 4
CONNECTIONS, OPERATING AND DISPLAY ELEMENTS 5
OPERATION 6-9
DIMMER CURVES 9-10
INFRARED REMOTE CONTROL 10-11
DIFFUSERS 11
INSTALLATION AND MOUNTING 11
DMX TECHNOLOGY 12
TECHNICAL DATA 13
MANUFACTURER’S DECLARATIONS 13-14
DMX CONTROL 75-77
DEUTSCH
SICHERHEITSHINWEISE 15-16
EINFÜHRUNG 16
ANSCHLÜSSE,BEDIEN- UND ANZEIGEELEMENTE 17
BEDIENUNG 18-21
DIMMERKURVEN 21-22
INFRAROT FERNBEDIENUNG 22-23
STREUSCHEIBEN 23
AUFSTELLUNG UND MONTAGE 23
DMX TECHNIK 24
TECHNISCHE DATEN 25
HERSTELLERERKLÄRUNGEN 25-26
DMX STEUERUNG 75-77
FRANCAIS
MESURES PRÉVENTIVES 27-28
INTRODUCTION 28-29
RACCORDEMENTS, ÉLÉMENTS D’AFFICHAGE ET DE
COMMANDE 29-30
UTILISATION 30-33
COURBES DE DIMMER 33
TÉLÉCOMMANDE INFRAROUGE 34-35
DIFFUSEURS 35
INSTALLATION ET MONTAGE 35
TECHNOLOGIE DMX 36
CARACTÉRISTIQUES TECHNIQUES 37
DÉCLARATIONS DU FABRICANT 37-38
PILOTAGE EN MODE DMX 75-77
ESPAÑOL
MEDIDAS DE SEGURIDAD 39-40
INSTRUCCIONES DE SEGURIDAD 40
INTRODUCCIÓN 40-41
CONEXIONES, MANDOS Y ELEMENTOS DE VISUALIZACIÓN 41-42
FUNCIONAMIENTO 42-45
CURVAS DE ATENUACIÓN 45
MANDO A DISTANCIA POR INFRARROJOS 45
DIFUSORES 47
INSTALACIÓN Y MONTAJE 47
TECNOLOGÍA DMX 48
DATOS TÉCNICOS 49
DECLARACIONES DEL FABRICANTE 49-50
CONTROL DMX 75-77
POLSKI
ŚRODKI OSTROŻNOŚCI 51-52
WPROWADZENIE 52
GNIAZDA, PANEL OBSŁUGI I WSKAŹNIKI 53-54
OBSŁUGA 54-56
KRZYWE ŚCIEMNIANIA 57
ZDALNE STEROWANIE NA PODCZERWIEŃ 58-59
DYFUZORY 59
USTAWIANIE I MONT 59
TECHNIKA DMX 60
DANE TECHNICZNE 61
OŚWIADCZENIA PRODUCENTA 61-62
STEROWANIE DMX 75-77
ITALIANO
MISURE PRECAUZIONALI 63-64
INTRODUZIONE 64
CONNETTORI, ELEMENTI DI COMANDO E DI VISUALIZZAZIONE 65
UTILIZZO 66-69
CURVE DIMMER 69
TELECOMANDO A INFRAROSSI 70-71
DIFFUSORI 71
INSTALLAZIONE E MONTAGGIO 71
TECNOLOGIA DMX 72
DATI TECNICI 73
DICHIARAZIONI DEL PRODUTTORE 73-74
CONTROLLO DMX 75-77
3
DMX DEUTSCHFRANCAISESPAÑOL ENGLISHITALIANO POLSKI
ENGLISH
YOU HAVE MADE THE RIGHT CHOICE!
This device was developed and produced under the highest standards of quality in order to ensure smooth operation for many years. Please
read these operating instructions carefully so that you can use your new Cameo Light product quickly and optimally. You can find more
information on Cameo Light on our website WWW. .COM.CAMEOLIGHT
SAFETY INFORMATION
1. Please read through these instructions carefully.
2. Store all information and instructions in a secure location.
3. Follow the instructions.
4. Heed all warnings. Do not remove any safety warnings or other information from the device.
5. Use the device only in the intended manner.
6. Use only stable and suitable stands and/or mounts (for fixed installations). Make sure that wall mounts are properly installed and secured.
Make sure that the device is securely installed and will not fall.
7. During installation, heed all safety provisions that apply in your country.
8. Do not install and operate the device in the vicinity of heaters, heat reservoirs, ovens, or other heat sources. Make sure that the device is
installed in such a way that it is sufficiently cooled and will not overheat.
9. Do not place any ignition sources, e.g. candles, on the device.
10. Do not block the ventilation slits.
11. The device was designed to be used only in interior spaces, do not operate the device in the direct vicinity of water (this does not apply
to specialty outdoor devices - in this case, please note the special instructions given in the following). Do not bring the device into contact
with combustible materials, fluids, or gases.
12. Make sure that no water can drop or splash into the device. Do not place any containers filled with fluids, such as vases or drinking
vessels, onto the device.
13. Ensure that no objects can fall into the device.
14. Operative the device using only those accessories recommended and specified by the manufacturer.
15. Do not open the device, and do not modify it.
16. After connecting the device, inspect all cable paths in order to avoid damage or accidents, such as those caused by tripping over said cables.
17. During transport, ensure that the device will not fall and potentially cause material damage and personal harm.
18. If your device no longer functions properly, fluids or objects have made their way into the device interior, or the device is otherwise
damaged, switch it off immediately and remove it from the power outlet (provided the device is active).
This device is to be repaired only by authorized specialists.
19. Use a dry towel to clean the device.
20. Follow all laws on disposal applicable in your country. Please separate plastic and paper or cardboard when disposing of the packaging.
21. Plastic bags must be kept out of reach of children.
FOR DEVICES CONNECTED TO A POWER SUPPLY:
22. ATTENTION: If the device power cable is equipped with a ground pin, it must be inserted into an outlet with a grounding conductor. Never
disable the grounding conductor of a power cable.
23. Do not immediately switch on the device when it has been exposed to stark temperature deviations (for example after transport).
Humidity and condensation could damage the device. Switch on the device only when it has reached room temperature.
24. Before you connect the device to the outlet, first ensure that voltage and frequency of the power supply complies with the values given
on the device. If the device has a voltage selector switch, connect the device to the outlet only if the device values comply with the values of
the power supply. If the provided power cable or power adapter does not fit your power outlet, contact an electrician.
25. Do not step on the power cable. Make sure that live cables, in particular those at the power socket or at the power adapter and the
device socket, are not bent.
26. With regard to the device cables, always make sure that the power cable or power adapter is always freely accessible. Always separate
the device from the power supply when the device is not in use or when you would like to clean the device. Always unplug the power cable
and power adapter from the power outlet using the plug or adapter, not the cord. Never touch the power cable and power adapter with wet hands.
27. If possible, do not switch the device on and off quickly because this may impair the service life of the device.
28. IMPORTANT INFO: Replace fuses only with fuses of the same type and value. If a fuse trips repeatedly, please contact an authorized
service center.
29. In order to completely separate the device from the power supply, remove the power cable or power adapter from the outlet.
30. If your device is equipped with a Volex power cord, release the correct Volex device connector before removing the cord. However, this
also means that the device may slide and fall when removing the power cord, which may cause personal harm and/or material damage.
Therefore, always lay cables carefully.
31. Remove the power cable and power adapter from the outlet when there is a risk of lighting or when you no longer want to use the device.
32. The device may only be installed when it carries no voltage (separate the power plug from the power supply).
33. Dust and other debris within the device may damage it. The device should be serviced or cleaned regularly by qualified specialists
depending on the environmental conditions (dust, nicotine, smoke, etc.) in order to avoid overheating.
34. The distance to combustible materials must be at least 0.5 m.
35. Power cables for powering multiple devices must have a core cross-section of at least 1.5 mm². In the EU, lines must be H05VV-F or
similar. Adam Hall provides suitable cables. Using these cables, you can connect multiple devices via the Power Out connection with the
Power In connection of another device. Ensure that the total power consumption of all connected devices does not exceed the specified
value (printed on the device). Be sure to keep power lines as short as possible.
36. The appliance is not to be used by persons (including children) with reduced physical, sensory or mental capabilities, or lack of


Product specificaties

Merk: Cameo
Categorie: Lamp
Model: Q-SPOT 40 RGBW

Heb je hulp nodig?

Als je hulp nodig hebt met Cameo Q-SPOT 40 RGBW stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Lamp Cameo

Handleiding Lamp

Nieuwste handleidingen voor Lamp