Caliber RDN802BT Handleiding

Caliber Navigator RDN802BT

Bekijk gratis de handleiding van Caliber RDN802BT (44 pagina’s), behorend tot de categorie Navigator. Deze gids werd als nuttig beoordeeld door 104 mensen en kreeg gemiddeld 4.0 sterren uit 52.5 reviews. Heb je een vraag over Caliber RDN802BT of wil je andere gebruikers van dit product iets vragen? Stel een vraag

Download PDF

Pagina 1/44

RDN 802 BT MANUAL

ENGLISH

Remove the Old Unit from the Dashboard

DIN Front Mount

DO NOT DISCONNECT WIRES

AT THIS TIME!

2. Insert the keys supplied with the

old unit into both sides of the unit

as shown in figure below until

they click. Pull to remove the old

unit from the dashboard.

1. Remove the outer trim frame.

INSTALLATION

Tools for Installation

Use the 2 removal wrenches of the old unit to take out the old unit and place with this brand new car radio. The following tools and sup-

plies may also be needed for the installation:

Tools for Installation: Philips Screw-drivers /Machine Screws /Wire Stripper /Wire Cutter /Hammer /Pencil /Electrical Tape /Electric Drill

Supplies for Installation: Machine Screws /Crimp Connectors /14 Gauge Wire for Power Connections /14-16 Gauge Speaker Wires

The above are not supplied.

Before you install

Automotive audio equipment installations can be challenging even to the most experienced of installation technicians. We strongly rec-

ommend that this unit should be professionally installed by a VAT registered installer (this is a requirement to validate the warranty).

IMPORTANT: Remove the two transport screws from the top fo the unit before installing.

Mark Polarity of the Speaker Wires

Marking the polarity of the speaker wires will make it easier to connect the existing speakers to your car radio. Consult wiring diagram

of existing head unit before disconnecting any wires. If you are not positive of the polarity of the existing wires from the speakers to the

head unit, install new wires.

1. While the old unit is playing, disconnect the wires from one speaker.

2. Take a length of masking tape and fold it around the wire so it forms a flag.

3. On the masking tape mark the polarity of the speaker wires (+&-), as well as left or right, and front or rear.

4. Double check that you marked the first speaker correctly by checking that the speaker wires are the same at the head unit.

5. Repeat this procedure for all of the speakers.

6. Mark the power, ground, and any other wires also.

Product specificaties

Merk:	Caliber
Categorie:	Navigator
Model:	RDN802BT
Kleur van het product:	Zwart
Gewicht:	- g
Breedte:	- mm
Diepte:	- mm
Hoogte:	- mm
Bluetooth:	Ja
Beeldscherm:	LCD
Beeldschermdiagonaal:	6.2 "
Resolutie:	800 x 480 Pixels
Touchscreen:	Ja
Maximale capaciteit van de geheugenkaart:	32 GB
Ondersteund audioformaat:	MP3, WMA
Ondersteunde videoformaten:	DIVX, MPEG4
Compatibele geheugenkaarten:	MicroSD (TransFlash)
Ingebouwde luidsprekers:	Ja
Ondersteund beeldformaat:	JPEG
Opslagmedia-type:	Geheugenkaart
USB-aansluiting:	Ja
AUX ingang:	Ja
DVD player:	Ja
Ondersteunde frequentiebanden:	AM, FM
Aantal voorkeurszenders:	30
Antenne:	Ja
Vermogen luidsprekers:	300 W
Afstandsbediening inbegrepen:	Ja
Cd-speler:	Ja
DIN-norm:	2 DIN
Herkenningspunten in 3D:	Ja
Handsfree bellen:	Ja
Afneembaar frontje:	Nee
Traffic Message Channel (TMC):	Ja