Buchla & TipTop Audio Model 264t Handleiding
Buchla & TipTop Audio
Niet gecategoriseerd
Model 264t
Lees hieronder de š handleiding in het Nederlandse voor Buchla & TipTop Audio Model 264t (3 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 8 personen en werd door 4.5 gebruikers gemiddeld met 4.5 sterren beoordeeld
Pagina 1/3
QUAD SAMPLE-AND-HOLD/POLYPHONIC ADAPTOR MODEL 264t
Eurorack 200 series
TPUTSART OU
sample and hold (samples on rising edge of pulse)
track and hold (tracks while pulse is high)
OFFSET
MODUL IONA T
m
ch
M
zero max
CO GENT LTAROL VO OUTPUTS
CO GENT LTAROL VO INPUTS
PUL UTSSE INP
PUL TPUTSSE OU
POLYP HONI C IN PUTS
1 2 3 4
sep atear common NUMBER OF VOICES
QUAD SAMPLE AND HOLD MODEL 264
POLYPHONIC ADAPTOR
Four independent sample-and-hold circuits, plus a specialized logic circuit for expediently implementing polyphonic patches.
Sample-and-holdās are essentially one-cell analog memories. They are useful for ārememberingā the instantaneous value of a
control voltage (a detected envelope, for example), for generating equally spaced steps from a constant slope input (as from a 281t
envelope generator), and for converting any continuously changing voltage (a random voltage, for instance) into a series of discrete
values.
The 264ās sample-and-hold circuits have two operating modes: sample and track. In the sample mode, the value of the input is
sampled and applied to the output whenever a pulse is received. The output remains at this value until the next pulse arrives. The
track mode diīers in that an input is applied to the output for the duration of the pulse. The output tracks the input until the end of
the pulse and remains at a constant value until the next pulse.
To use the 264t as four independent channels set the separate/common switch to separate. A single CV can be set to all four
channels by setting the operate/common to common and plug CV in the the back jack on the with right side.
The Model 264t includes a polyphonic adaptor, which performs the logic necessary to implement four-voice polyphony. Facilities
are incorporated for ļ¬ne tuning and f.m. modulating the oscillators; light emitters display the adaptorās operation.
ART Quantizer
The four voltage control outputs are internally routed to a quad-channel quantizer with four ART outputs for use with ART-equipped
oscillators, such as the 259t Complex Oscillator. A 12-stage switch selects the key, while the knob above chooses the scale: Minor
(m), Chromatic (ch), or Major (M).
QUAD SAMPLE-AND-HOLD/POLYPHONIC ADAPTOR MODEL 264t
Eurorack 200 series
First step: Oscillator Calibration (Quick Start)
A push switch sends either Auto-Tune Initial Tuning or command via the ART outputs to the oscillators. Both functions are
explained in detail in the 259t user manual, which also provides additional ART-related information worth knowing.
To quickly set up the 259t:
1 Connect any ART output to the 259t oscillators and set them to .ART mode
2 Let the oscillators warm up for a minimum of .30ā40 minutes
3 Hold down the āthe 259t will begin 264t tuning switch Initial Tuning, calibrating each oscillator one at a time.
The LED will turn oī, then start blinking as it tunes the ļ¬rst oscillator.
4 Once tuning is complete, the oscillators can play notes via ART.
Auto-Tune can be sent periodically to correct tuning if it sounds like the oscillates are out of tune. (Beware that the ļ¬ne tune knobs
on the 259t needs to be set fully CCW for the note center pitch) To send an Auto-Tune command short press the tuning switch on
the 264t.
Playing Notes
The ART Quantizer is tied to the function. When a is sent to the , the control voltage is Sample and Hold gate pulse gate input
converted into a note value and sent via ART to the oscillator.
ā¢ The determines the note length at the oscillator.gate pulse length
ā¢ In Track and Hold mode, the 264t ART output follows changes in input voltage .as long as the gate is high
SEQUENTIAL VOLTAGE SOURCE MODEL 245
advance
IN
OUT
A
C
D
B
pulseanalog
PULSER
OUT
ref pulse
PULSE LENGTH
%
of period
0 100
INTERNAL TIME
.002
.005 .5
10
IN
259t
ART INPUT
Eurorack 200 series
Speciļ¬cations:
Size: 18 HP - Depth: 45mm
Power: +12V 60mA / -12V 30mA
QUAD SAMPLE-AND-HOLD/POLYPHONIC ADAPTOR MODEL 264t
SEQUENTIAL VOLTAGE SOURCE MODEL 245
advance
IN
OUT
A
C
D
B
pulseanalog
PULSER
OUT
ref pulse
PULSE LENGTH
%
of period
0 100
INTERNAL TIME
.002
.005 .5
10
IN
259t
ART INPUTS
259t
ART INPUTS
Four voice poly
Product specificaties
| Merk: | Buchla & TipTop Audio |
| Categorie: | Niet gecategoriseerd |
| Model: | Model 264t |
Heb je hulp nodig?
Als je hulp nodig hebt met Buchla & TipTop Audio Model 264t stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Niet gecategoriseerd Buchla & TipTop Audio
3 Juni 2025
2 Juni 2025
3 Maart 2025
30 Januari 2025
30 Januari 2025
9 Januari 2024
Handleiding Niet gecategoriseerd
- Niet gecategoriseerd Noxon
- Niet gecategoriseerd CommScope
- Niet gecategoriseerd Pro-Lift
- Niet gecategoriseerd Little Tikes
- Niet gecategoriseerd Trace Elliot
- Niet gecategoriseerd Viper
- Niet gecategoriseerd Wabeco
- Niet gecategoriseerd Stihl
- Niet gecategoriseerd Dodow
- Niet gecategoriseerd SwitchBot
- Niet gecategoriseerd Adastra
- Niet gecategoriseerd Laser
- Niet gecategoriseerd Joranalogue
- Niet gecategoriseerd Tesseract Modular
- Niet gecategoriseerd Qute
Nieuwste handleidingen voor Niet gecategoriseerd
4 Juni 2025
4 Juni 2025
4 Juni 2025
4 Juni 2025
4 Juni 2025
4 Juni 2025
4 Juni 2025
4 Juni 2025
4 Juni 2025
4 Juni 2025