Bradley WBD1-0011 Handleiding
Bradley
Zeepdispenser
WBD1-0011
Bekijk gratis de handleiding van Bradley WBD1-0011 (12 pagina’s), behorend tot de categorie Zeepdispenser. Deze gids werd als nuttig beoordeeld door 5 mensen en kreeg gemiddeld 5.0 sterren uit 3 reviews. Heb je een vraag over Bradley WBD1-0011 of wil je andere gebruikers van dit product iets vragen? Stel een vraag
Pagina 1/12
1
WashBar
®
Maintenance Guide
1
2
3
CLEANING MATERIALS
1 Basin
For everyday cleaning, use a mild, neutral
base cleaner. For more aggressive cleaning,
use a Mr. Clean Magic Eraser.
Do not use a rough pad.
2 WashBar
For everyday cleaning, wipe gently with
a damp cloth and dry with a soft towel
such as microber or terry cloth.
Note: Do not use harsh abrasives. These
can scratch the chrome finish and sensors.
3 Stainless Steel Access Panel
For everyday cleaning, use a solution of warm
water with soap, detergent or ammonia.
TABLE OF CONTENTS
Cleaning Materials 1
WashBar Cleaning Model 2
Cleaning the Drain Cap and Trench Drain 3
WashBar LED Indicators 4
Relling the Soap (Below Deck Option) 5, 6
Relling the Soap (Top Fill Option) 7
How to Change Hand Dryer Speed 8, 9
How to Update WashBar Software 10
WB1 WBD1WB2
2
1 Place a hand under the dryer and then
immediately under the soap and hold
hands under both sensors for 5 seconds
until all LED lights turn solid White.
NOTE: LED lights will flash Red while
hands are under the WashBar.
1
2
3
WASHBAR CLEANING MODE
Cleaning mode temporarily disables the WashBar for 30 seconds so you can
clean the unit without the soap, water or dryer sensors activating.
2 When in Cleaning Mode, you can wipe down
the basin and the sensors on the WashBar.
NOTE: Use a soft cloth (microfiber or
terry cloth). It is NOT recommended to
use paper towels on sensor plates.
3 After 30 seconds, the WashBar will automatically
return to Standby Mode and be ready for use.
Note: See page 1 for proper cleaning materials
to use on the basin and WashBar.
3
1 Put the WashBar in Cleaning Mode.
See page 2 for instructions.
1
2
4
5
3
CLEANING THE DRAIN CAP AND THE TRENCH DRAIN
It’s recommended to remove the drain cap and clean the trench drain 2–3 times per month.
2 Use a at head screw driver or similar tool
and carefully remove the drain cap. Be
sure not to scratch the basin material.
3 Wipe down the strainer in the trench
drain and then remove it using a
phillips head screw driver.
4 Clean the trench drain and then
screw the strainer back in.
5 Place the drain cap back in the trench. Make
sure the drain cap is ush with the basin by
pushing down on the middle and sides.
Product specificaties
| Merk: | Bradley |
| Categorie: | Zeepdispenser |
| Model: | WBD1-0011 |
Heb je hulp nodig?
Als je hulp nodig hebt met Bradley WBD1-0011 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Zeepdispenser Bradley
25 Augustus 2025
Handleiding Zeepdispenser
- GOJO
- Lavex
- BTI Aqua-Solutions
- Tiger
- Silvercrest
- Hansgrohe
- Miomare
- Sloan
- Bartscher
- DCG
- Micrell
- San Jamar
- Homedics
- Purell
- Smeg
Nieuwste handleidingen voor Zeepdispenser
26 Augustus 2025
25 Augustus 2025
11 Juni 2025
11 Juni 2025
11 Juni 2025
11 Juni 2025
11 Juni 2025
10 Juni 2025
10 Juni 2025
10 Juni 2025