BOYA BY-WXLR8 Pro Handleiding

BOYA Microfoon BY-WXLR8 Pro

Lees hieronder de 📖 handleiding in het Nederlandse voor BOYA BY-WXLR8 Pro (2 pagina's) in de categorie Microfoon. Deze handleiding was nuttig voor 33 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/2

Press + & -

to unlock

LCD will be locked automatically in 30 seconds

Long press bottoms “+” and “-“ to unlock.

27 28 29 30 31 32

7. SET button

Press to change and enter display parameters.

For details, please see “How to set up channel, VOL, STEREO

and MONO” on page 24.

5. LCD display

8. Battery compartment

Accommodates two AA batteries.

6. + (+ selection)/ – (- selection) buttons

Press these buttons to set the transmission channel, or

attenuation level of the input signal.

9. Power/Mute button

Function Operation

Power ON

Power OFF

Mute ON

Mute OFF

Long press button

Long press button until it turns o

Short press button

For more details about LED indicator, please refer to “Power LED”

on page 30.

3) The pwer LED of BY-WXLR8 Pro blinks red when mute on.

Only works with XLR dynamic micrphones or battery-powered

condenser microphones.

BY-WXLR8 Pro

Plug-on Transmitter

1. Audio XLR input connector

Connect a microphone or a line output connector of an audio

mixer, etc.

2. Power LED

1) The power LED glows blue when the unit is on.

2) The power LED of transmitter glows red when low power.

3. Knurled ring

4. Line In

LCD Display Operation Guide. Installing Batteries

The transmitter is each powered by two AA batteries. To install

batteries, please follow these steps:

1. Slide the battery cover to release the lock and open the battery

compartment.

2. Insert two new AA batteries into the battery compartment by

matching their polarities to the indications inside the compartment,

and then close the cover.

To attach a microphone or a XLR cable

Microphone or XLR cable

Knurled ring

Push the microphone or cable connector into the XLR audio

input jack of the BY-WXLR8 Pro, then turn the knurled ring in a

anticlockwise direction,gently tightening it so the microphone or

XLR cable base is seated rmly in place.

To detach a microphone or a XLR cable

Turn the knurled ring in a clockwise direction, and pull o the

microphone or cable slowly.

Note: Please turn o the transmitter before attaching or removing

the microphone.

Connecting the Plug-on Transmitter and the Receiver

To connect the Plug-on Transmitter and the receiver, follow these steps:

1. Turn on the transmitter and the receiver.

2. Set the plug-on transmitter and the receiver to the same channel.

If you are experiencing interference or noise on one channel, try a

different channel.

NOTE:

For more details, please refer to “LCD Display Operation Guide”

on page 30.

1 2 3

CH-A-48

① ）Channel Group (A/B

Long press “SET” botton to change Channel “A” or “B”

②Channel number (1-48)

③Battery indication

Mute On

IMPORTANT

1. The BY-WXLR8 Pro does not support external power supply.

2. Do not set the INPUT mold to MIC mold while the audio signal

is being input from the audio mixer, etc., it may cause excessive

audio input, resulting in distroted playback or recorded sound or

damage to playback or recording equipment.

Product Structure

Product specificaties

Merk:	BOYA
Categorie:	Microfoon
Model:	BY-WXLR8 Pro
Kleur van het product:	Zwart
Ingebouwd display:	Ja
Gewicht:	162 g
Breedte:	57 mm
Diepte:	45.5 mm
Hoogte:	117 mm
Vormfactor:	Bodypackzender
Aantal kanalen:	48 kanalen
Totale harmonische vervorming (THD):	0.5 procent
XLR out:	1
Type beeldscherm:	OLED
Type batterij:	AA
3,5 mm in:	Ja
Switching bandbreedte:	24 MHz
Automatische vergrendelfunctie:	Ja
Valse uitstoot:	250 dBmW