BOYA BY-M1000 Handleiding

BOYA Microfoon BY-M1000

Lees hieronder de 📖 handleiding in het Nederlandse voor BOYA BY-M1000 (2 pagina's) in de categorie Microfoon. Deze handleiding was nuttig voor 125 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/2

BY-M1000

Large Diaphragm Condenser Microphone

OmniCardioid

Bidirectional

Instruction Manual

Thanks for purchasing BOYA BY-M1000!

• BY-M1000 condenser microphone

• Studio-grade pop shield

• Shockmount

• 3m(10ft) balanced XLR cable

3. Mounted the supplied pop filter in front of microphone.

4. Insert supplied XLR cable to microphone

Instruction:

1. Mount BY-M1000 on 3/8" and 5/8" microphone stands

or tripods.

2. Rotate locking knob to adjust microphone fits your

position.

Note:

When changing the mic position, always be sure to loosen

the adjustment knob first to ensure you do not damage

the shock mount.

How to use it

Note:

When recording any sound source, whether it be vocals,

instruments or anything else, always spend time

experimenting with microphone placement to ensure you

are picking up the best possible sound. Adjust the

microphone position as many times as you need to

achieve your demand.

General Functions

- Polar Patterns

Omni-directional

Bi-directional

- High-Pass Filter

- A -10 dB Pad Switch

Contents:

The BOYA BY-M1000 is a 34mm(1.3") diaphragm

condenser microphone, with sturdy all-metal housing,

three selectable polar patterns, -10dB switch design,

BOYA BY-M1000 is suited for capturing instruments and

vocals in project and professional recording applications,

such as singer, songwriters, podcasters, voiceover

artists, field recorders, and home studio recordings.

Additionally, the microphone offers a 20 Hz to 20 kHz

frequency response for accurately reproducing audio

signal in a variety of ranges.

Features Polar Pattern

Frequency Response

• Gold-sputtered diaphragm

• Broadcast-quality condenser microphone

• Cardioid, Omnidirectional and Bidirectional polar patterns

• Wide frequency range and ultra low noise

• Off-axis rejection for clean recordings

• Included shockmount & pop filter

• Controlled by low-cut filter switch

• 0dB ,-10 dB Pad switch

• Electrically balanced output

• 3-Pin XLR plug

• 24V or 48V phantom power

• All-metal housing

• Included 3/8" and 5/8" thread

The microphone uses standard 24V or 48V phantom

power, which is supplied through the standard XLR

connector.

Cardioid

The cardioid polar pattern is focusing audio capture in

front of the capsule, minimizes unwanted ambient

sound from the other sides and back of the microphone.

This polar pattern is suitable for such situations when

you want to pick up specific sund sources, such as

recording vocals, guitar, pianos, stringed instruments,

and more.

The omni-directional polar pattern will in principle pick up

sound equally from all directions. Whether the sound

resource from the front, the side, or even back, the

microphone will record the signals all with equal gain. This

polar pattern can be very useful in applications where

sound needs to be recorded from multiple directions, such

as a musical performance where there is a band of

musical instruments in front and a choir singing behind.

Bidirectional polar pattern is figure-of-eight pattern and

picks up sound equal sensitivity from two opposite

directions, front and back of the microphone, and with

low sensitivity from the sides. This polar pattern is best

suited for interview, Q&A lecture or presentation,

acoustic instruments, and for live recordings of jazz and

acoustic groups.

A low-cut filter at 150 Hz allows you to eliminate low

frequency hum and other low-frequency noises.

A -10 dB pad switch provides more headroom when

capturing transient signals that may otherwise cause

peak distortion.

Specifications:

Acoustic Principle:

Polar Pattern:

Diaphragm:

Frequency Response:

Sensitivity:

SN:

Output Impedance:

Power Requirement:

Cable Length:

Dimensions:

Weight:

Condenser

Cardioid, Omnidirectional, Bidirectional

34mm(1.3")

20– 20,000Hz

-33±3dB (0dB=1V/Pa @ 1KHz)

80dB and more

200 Ohm

24V or 48V Phantom

3m(10ft)

207 x 115 x 185mm(8.1” x 4.5” x 7.3”)

812g (29 oz)

www.boya-mic.com

SHENZHEN JIAYZ PHOTO INDUSTRIAL., LTD.

The BOYA logo is a trademark which is registered and owned by

Shenzhen Jiayz Photo Industrial., Ltd.

COPY RIGHT 2010-2020

Email: sales@boya-mic.com

www.boya-mic.com / www.jiayz.com

Maintaining Your Microphone

• Keep your microphone away from dust, moisture, or water.

• To clean the housing, wipe with a dry micro-fiber cloth to

remove dust.

• Store your microphone in the included pouch to protect it

from dirt and dust.

Important Safety Information

• Make sure that you follow all safety notes.

• Keep these instructions for use in a safe place. If you sell

the equipment or pass it on to someone else, you should

also pass on these instructions for use.

Marking on the devices

Danger of fire and short-circuit

Waste disposal and protection of the environment

Electric and electronic appliances, as well as batteries, must

not be disposed of together with domestic waste. The user is

legally obliged to return electric and electronic appliances as

well as batteries to specially set up public collecting points or

the sales outlet once they have reached the end of their service

life. Details are regulated by national law. The symbol on the

product, the instructions for use, or the packaging refers to

these provisions. The recycling of waste equipment/batteries is

an important contribution to the protection of our environment.

• Do not operate the device with wet hands.

• Clean the equipment only in the way described in Maintaining

Your Microphone.

• Take care to avoid dropping the equipment. Make sure that

the device is properly fastened and reliably mounted. If the

device has been dropped, have it inspected by a skilled

technician before you switch it on again.

• Should the equipment be damaged or defective, or if you

notice a scorching smell, remove the batteries immediately.

Do not operate the device with a damaged housing and do

not repair the device yourself. Have the device only repaired

by a skilled service person.

Note:

The “BOYA” Logo on the face of the BY-M1000 indicates

the front of the microphone, and the pickup area of the

capsule. The “BOYA” Logo should always be facing towards

the sound source that you wish to record.

BY-M1000说明书

吴蒙蒙/2019-5-7

BY-M1000说明书V01

1：1

尺寸：100x160mm 1PCS

V01

105g双铜纸双面印刷 5折页

1F14015BY0151

Product specificaties

Merk:	BOYA
Categorie:	Microfoon
Model:	BY-M1000
Kleur van het product:	Zwart
Breedte:	185 mm
Diepte:	115 mm
Hoogte:	207 mm
Snoerlengte:	3 m
Soort:	Microfoon voor studio's
Materiaal behuizing:	Metaal
Connectiviteitstechnologie:	Bedraad
Meegeleverde kabels:	XLR
Microfoon mute:	Ja
Soort voeding:	Phantom power
Aansluiting:	XLR-3
Compatibele producten:	mic preamps, mixers, audio interfaces and video camera
Verpakkingsinhoud:	BY-M1000 condenser microphone; Studio-grade pop shield; Shockmount; 3m(10ft) balanced XLR cable
Technische details:	Cardioid, Omnidirectional and Bidirectional polar patterns
Spreekspoel types:	Condensor
Frequentie microfoon:	20 - 20000 Hz
Gewicht microfoon:	812 g
Output impedance:	200 Ohm
Spook power:	24 or 48 V
Membraan diameter:	34 mm
Trillingsdemper microfoon inbegrepen:	Ja
Plopkap inbegrepen:	Ja