Boss POLCAM Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Boss POLCAM (6 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 33 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/6
POLCAM
COMPATIABLE WITH POLARIS®
RZR RIDE COMMANDâ„¢
1
Introduction
Congratulations on your purchase, and welcome to BOSS Audio Systems!
This camera is designed to be mounted on the front or rear of your Polaris RZR
vehicle. The camera is compatible with Polaris RZR models equipped with Ride
Command unit. With the supplied connection cables, you can easily plug and
play on any other head unit with a video input.
Delivery content
• 1x Front/Rear camera with female JST Ride Command compatible connector
• 1x Universal Power/Video cable with male JST connector
• Camera mounting kit
• User manual
Before use
Read and understand all instructions before you use your product. If you do
not follow the instructions in this manual, we are not responsible for injury or
damage resulting from improper handling, or vehicle damage due to improper
installation. This will also void the warranty.
Important safety precautions
• Use of the camera must not replace other safe driving habits. Precise control
and looking around before backing up is necessary.
• Always remember that the area displayed by the camera system is limited,
and certain obstacles may not be detected or not reliably detected.
• Servicing must only be carried out by a technician. Contact our technical
support for any service question.
Installation precautions
• WARNING: Always consult a professional installer.
• Improper wiring and mounting of the product can cause damage, injury or
accident. Have installation performed by a professional only. Contact our
technical support for any installation questions.
• Observe the safety and operating instructions of the devices which are
connected to the product.
• Only use the accessories provided with the product.
2
Wiring
Important notes on wiring
• This product must be used with 12 DC power supply. Never connect this
product to any other power supply.
• Disconnect the negative terminal of the vehicle battery prior to installation.
• Make sure wires are not squeezed or damaged by sharp edges. Use rubber
bushings for protection if needed.
12 3
Universal video cable Camera cable
Blue and white
wire loops
DC 12V
Camera
1. Connect the camera to the moniter on your vehicle. See
1.
Connect the yellow RCA plug of the supplied video cable to the video input
on your monitor.
See the user manual of your monitor for power connection to the monitor.
2. Connect the camera to power supply. See 2.
For the front camera:
Connect the red splitting wire of the video cable to the accessory power of
your vehicle. When connected to theaccessory power, the camera will auto
power on and display live view upon starting the vehicle engine.
For the rear camera:
Connect the red splitting wire of the video cable to the positive wire of the
reverse light. When connected to the reverse light, the camera will auto power
on and display live view upon putting the vehicle in the reverse gear.
3. Connect the video and camera cables together. See 3.
Now you complete all the camera wiring.
Image setting
• When used as a front camera, cut off the blue wire loop to avoid reverse
image. When used as a rear camera, keep the blue wire loop uncut for rear
view image.
• To display guide lines in the camera view, keep the white wire loop uncut.
Otherwise, cut it off.
• To activate the image setting change (cut-off of the wire loop), unplug the
camera cable and plug it again.


Product specificaties

Merk: Boss
Categorie: Niet gecategoriseerd
Model: POLCAM

Heb je hulp nodig?

Als je hulp nodig hebt met Boss POLCAM stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Niet gecategoriseerd Boss

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd