Boss CUBE Street II Handleiding

Boss Receiver CUBE Street II

Lees hieronder de 📖 handleiding in het Nederlandse voor Boss CUBE Street II (12 pagina's) in de categorie Receiver. Deze handleiding was nuttig voor 47 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/12

Owner’s Manual

Battery-Powered Stereo Amplier

Before using this unit, carefully read “USING THE UNIT SAFELY” and “IMPORTANT NOTES” (leaet “USING THE UNIT SAFELY” and Owner’s Manual (p. ). After reading, keep the 12

document(s) where it will be available for immediate reference.

Panel Descriptions

MIC/INSTRUMENT Channel

1 EQUALIZER

[BASS] knob

Adjusts the sound level of the low-frequency range.

[MIDDLE] knob

Adjusts the sound level of the middle-frequency range.

[TREBLE] knob

Adjusts the sound level of the high-frequency range.

2 [REVERB] knob

Adjusts the reverb depth.

3 [SELECT] switch

Switches to the input level that’s appropriate for the device you’ve

connected.

Use the “MIC” setting if you’re connecting a mic, or use the “INST”

setting if you’re connecting an acoustic guitar or a keyboard.

4 [VOLUME] knob

Adjusts the volume of the MIC/INSTRUMENT channel.

5 HARMONY

This adds natural harmonies to the audio that is input from the MIC/

INSTRUMENT jack.

[HARMONY] knob

Use this to turn the harmony on/o, switch between harmony types

and adjust the volume. The setting changes depending on the

position of the knob.

Type Explanation

UNISON Creates an eect that sounds like someone else singing the

same melody together.

HIGH Adds harmony notes based on upper fourths and thirds. *1

HIGHER Adds harmony notes based on sixths and fths. *1

*1 Other pitches may be added under certain conditions.

[KEY] button

This sets the key for the harmony (p. 6).

GUITAR/MIC Channel

6 [TUNER] button

Press to tune your guitar (p. 6).

7 EQUALIZER

[BASS] knob

Adjusts the sound level of the low-frequency range.

[MIDDLE] knob

Adjusts the sound level of the middle-frequency range.

[TREBLE] knob

Adjusts the sound level of the high-frequency range.

8 [CHORUS/DELAY] knob

This knob switches between chorus or delay, depending on the

position.

Type Explanation

CHORUS Chorus is an eect that creates a beautiful spaciousness

and depth by adding a slightly modulated sound.

DELAY Changes the delay time and eect.

9 [REVERB] knob

Adjusts the reverb depth.

1 9 13 147 82

3 4 6 10 11 12 15

516

Top Panel

Panel Descriptions

10 [AMP TYPE] knob

Selects the amp type. All provided amp types are original.

[AMP TYPE] knob

This knob switches between amp type variations.

Type Explanation

A-GUITAR

Use this type when connecting an acoustic guitar.

This adjusts the resonance of the acoustic guitar body.

NORMAL A direct sound that doesn’t adjust the

resonance.

BRIGHT A brilliant sound extending to the

high range.

WIDE A full sound with emphasized body

resonance.

INSTRUMENT Select this when connecting a musical instrument.

E-GUITAR

Select this when connecting an electric guitar.

CLEAN

This is an original amp that provides a

clean and natural sound with a sense

of transparency. Use this together with

the chorus and reverb of this unit for a

spacious, three-dimensional sound.

CRUNCH

This original amp delivers a fat crunch

sound, with each note sounding

clearly.

LEAD This is a high-gain original amp that

produces thick-sounding distortion.

ACOUSTIC SIM

This is an original amp that transforms

the sound of a connected electric

guitar into the sound of an acoustic

guitar.

MIC Select this if you’ve connected a microphone.

11 [GAIN] knob

Adjusts the gain (amount of distortion).

12 [VOLUME] knob

Adjusts the volume of the GUITAR/MIC channel.

Common to Both Channels

13 [i-CUBE LINK/AUX IN] knob

Adjusts the audio volume from the i-CUBE LINK/AUX IN jack, USB

port (USB IN) and .Bluetooth®

* Note that the CUBE STREET II does not oer Bluetooth functionality.

You’ll need to attach the BT-DUAL (sold separately) to use Bluetooth

(p. 8).

14 [OUTPUT POWER] switch

Changing the setting of this switch changes the maximum volume

of the internal speaker and the available operating time on

batteries.

Setting Explanation

MAX The maximum volume is louder, but the available

operating time is shorter.

ECO The maximum volume is reduced, but the available

operating time is longer.

15 LOOPER

You can record up to 90 seconds (in mono) and play back the

recorded section over and over. You can also layer additional

performances with the recording as it plays back (overdubbing).

This lets you play along with your own backing tracks on the y

(p. 7).

* The factory default setting is set to a maximum of 45 seconds

(stereo). With the dedicated mobile device app, you can select up

to a maximum of 90 seconds (mono). For details, refer to “Wireless

Connection with a Mobile Device” (p. 8).

[LOOPER] button

Switches between recording, loop playback, and overdubbing.

[STOP] button

Stops recording or playback.

REC/PLAY/DUB indicator

Indicates the status of the looper.

16 [POWER] switch

Turns the power of this unit on/o.

Product specificaties

Merk:	Boss
Categorie:	Receiver
Model:	CUBE Street II
Kleur van het product:	Zwart
Gewicht:	4400 g
Breedte:	414 mm
Diepte:	285 mm
Hoogte:	255 mm
Gebruikershandleiding:	Ja
Aan/uitschakelaar:	Ja
Connectiviteitstechnologie:	Bedraad
Type stroombron:	AC, Battery
Inclusief AC-adapter:	Ja
Microfoon, line-in ingang:	Ja
Gemiddeld vermogen:	10 W
Ondersteund aantal accu's/batterijen:	8
Aantal luidsprekers:	2
Inclusief netsnoer:	Ja
Audio-uitgangskanalen:	- kanalen
Type batterij:	AA
Nominale input level:	-40 dB
Bestandsgrootte luidspreker-stuurprogramma:	6.5 "
Pedaalstekker:	Ja