Boss BPRZRD Handleiding


Lees hieronder de đź“– handleiding in het Nederlandse voor Boss BPRZRD (10 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 120 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/10
BPRZRD
Polaris RZR
Receiver Installation Kit
INSTALLATION MANUAL
- 1 -
Congratulations on your purchase of a POWERSPORTS product.
Table of Contents
Introduction 1 .........................................................................................................................................................
Package Contents 1 ..............................................................................................................................................
Speciîšżcations .....................................................................................................................................................2
2019+ RZR XP1000 Upper Dash Mount Installation 2 ..........................................................................................
a) Before you start (upper dash mount) 2 .......................................................................................................
b) Upper install kit assembly 2 ........................................................................................................................
c) Final assembly (upper dash mount) 5 .........................................................................................................
2014-2018 RZR Lower Dash Mount Installation 5 .................................................................................................
a) Before you start (lower dash mount) 5 ........................................................................................................
b) Lower install kit assembly 6 ........................................................................................................................
c) Final assembly (lower dash mount) 8 ........................................................................................................
Introduction
This Polaris RZR receiver installation kit is designed to replace the factory upper or lower dash pocket, and thus
make possible the installation of a BOSS Audio Systems gauge radio on your Polaris RZR vehicle.This installation
kit îšżts all Polaris RZR 900, 1000, Turbo and 4-seat models from 2014 to current year (excluding Pro XP).
It is compatible with most BOSS Audio Systems marine gauge receivers with 3” ~ 3.5” (e.g. MGV550B,
MGV520B, MGR450B, MGR350B, MGR250B and MRG150B)
Please read this manual carefully so you will know how to install your product properly. After you have îšżnished
reading this manual, store it in a safe place for future reference.
Package Contents
(1) (2) (3) (4)
1. Upper dash mount panel (x1)
2. Metal brace plate (x1)
3. Lower dash mount panel (x1)
4. Adaptable mount panel (x1)
5. Screw bag (x1)
(5)
M3x30mm (x4)
3.5x12mm (x4)
x4
(6)
6. Rubber foot ( )x2
(for MGR450B use only)
BPRZRD
Polaris RZR
Receiver Installation Kit
INSTALLATION MANUAL
- 2 -
Specications
Compatibility
• Source unit: Most BOSS Audio System marine gauge radios with 3”-3.5”
• Vehicle: all Polaris RZR 900, 1000, Turbo and 4-seat models from 2014 to current year (excluding Pro XP)
Materials
• ABS plastic (except the metal brace plate)
Speciîšżcations are subject to change without notice.
2019+ RZR XP1000 Upper Dash Mount Installation
The upper dash mount is applicable to the 2019+ Polaris RZR XP1000 models (excluding Pro XP).
The installation kit is compatible with the following marine gauge source units:
MGV550B, MGV520B, MGR450B, MGR350B, MGR250B and MRG150B.
a) Before you start (upper dash mount)
• Remove the upper dash pocket from your RZR as follows:
Remove the push pins that secure the upper dash pocket (set aside the push pins for the îšżnal assembly),
then remove the upper dash pocket by tilting it away from the dash.
The upper dash pocket will not be installed. Your source unit attached to the installation kit will take its place.
• The installation kit has an adaptable mount panel which is required for the upper dash mount of the
following source units: MGV520B, MGR450B, MGR250B and MGR150B. MGV550B does not require the
adaptable mount panel.
For MGV520B and MGR450B, use a proper tool to drill four screw bit size holes on the adaptable mount
panel.
To drill holes, locate the four hole marks indicated as “MGV520B” or “MGR450B” on the back side of the
adaptable mount panel.
For MGR450B source unit, drill four holes
indicated as “MGR450B” for screw fastening.
For MGV520B source unit, drill four holes
indicated as “MGV520B” for screw fastening.
Adaptable mount panel
b) Upper install kit assembly
Depending on a BOSS Audio Systems source unit you have, installation method and kit may vary. Follow the
guideline below that applies to your source unit.


Product specificaties

Merk: Boss
Categorie: Niet gecategoriseerd
Model: BPRZRD

Heb je hulp nodig?

Als je hulp nodig hebt met Boss BPRZRD stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Niet gecategoriseerd Boss

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd