Bosch GEX18V-150-3 Handleiding
Pagina's 72 Schuurmachine
Bekijk de handleiding van Bosch GEX18V-150-3 gratis online of download de PDF. Deze handleiding is 0 keer bekeken. Vraag over dit model? Stel een vraag
Operating / Safety Instructions
Consignes d’utilisation / de sécurité
Instrucciones de funcionamiento y seguridad
Call Toll Free for Consumer Information & Service Locations
Pour obtenir des informations et les adresses de nos centres de service après-vente, appelez ce numéro gratuit
Llame gratis para obtener información para el consumidor y ubicaciones de servicio
For English Version
See page 2
●
Version française
Voir page 23
●
Versión en español
Ver la página 44
IMPORTANT
Read Before Using
●
IMPORTANT
Lire avant usage
●
IMPORTANTE
Leer antes de usar
1-877-BOSCH99 (1-877-267-2499) www.boschtools.com
GEX18V-150-3
EXEX18V-150-5
1619PC8632_GEX18V-150-3 EXEX18V-150-5_OSI_20260211.indd 11619PC8632_GEX18V-150-3 EXEX18V-150-5_OSI_20260211.indd 12/13/2026 4:16:35 PM2/13/2026 4:16:35 PM
2
Safety Symbols
The definitions below describe the level of severity for each signal word.
Please read the manual and pay attention to these symbols.
This is the safety alert symbol. It is used to alert you to potential
personal injury hazards. Obey all safety messages that follow this
symbol to avoid possible injury or death.
DANGER indicates a hazardous situation which, if not avoided, will
result in death or serious injury.
WARNING indicates a hazardous situation which, if not avoided,
could result in death or serious injury.
CAUTION indicates a hazardous situation which, if not avoided,
could result in minor or moderate injury.
Table of Contents
SAVE THESE INSTRUCTIONS
General Power Tool Safety Warnings ......3
Additional Safety Warnings .............5
Disposal.........................6
Intended Use........................6
Specications .......................7
Symbols............................8
Getting to Know Your Cordless Random
Orbit Sander ....................10
Assembly..........................12
Installing and Replacing the
Accessories...................12
PSA Backing Pad Accessories........12
Replacing the Backing Pad..........13
Backing Pad Guard................13
Backing Pad Damper ..............13
Installing and Removing the Battery
Pack ........................14
Dust Collection .....................14
Dust Canister....................14
Attaching a Vacuum Cleaner . . . . . . . . . 18
Operation .........................19
On/Off Button ...................19
Battery Charge Indicator............19
Speed Selection..................19
Using the Random Orbit Sander......20
Tool Tips ..........................20
Selecting Sanding Discs............20
Start of Sanding..................20
Sanding Action...................20
Sanding Sequence ................20
Removal of Sander................20
Maintenance .......................21
General Maintenance ..............21
Service.........................21
Tool Lubrication..................21
Batteries........................21
Bearings........................21
Cleaning........................21
Accessories and Attachments...........21
Troubleshooting.....................22
1619PC8632_GEX18V-150-3 EXEX18V-150-5_OSI_20260211.indd 21619PC8632_GEX18V-150-3 EXEX18V-150-5_OSI_20260211.indd 22/13/2026 4:16:36 PM2/13/2026 4:16:36 PM
3
Read all safety warnings, instructions, illustrations and specications pro-
vided with this power tool. Failure to follow all instructions listed below may
result in electric shock, re and/or serious injury.
SAVE ALL WARNINGS AND INSTRUCTIONS FOR FUTURE REFERENCE.
The term "power tool" in the warnings refers to your mains-operated (corded) power tool or bat-
tery operated (cordless) power tool.
SAVE THESE INSTRUCTIONS
General Power Tool Safety Warnings
1. Work area safety
a. Keep work area clean and well lit. Clut-
tered or dark areas invite accidents.
b. Do not operate power tools in explosive
atmospheres, such as in the presence of
ammable liquids, gases or dust. Power
tools create sparks which may ignite the
dust or fumes.
c. Keep children and bystanders away while
operating a power tool. Distractions can
cause you to lose control.
2. Electrical safety
a. Power tool plugs must match the outlet.
Never modify the plug in any way. Do
not use any adapter plugs with earthed
(grounded) power tools. Unmodied plugs
and matching outlets will reduce risk of
electric shock.
b. Avoid body contact with earthed or
grounded surfaces, such as pipes, radia-
tors, ranges and refrigerators. There is an
increased risk of electric shock if your body
is earthed or grounded.
c. Do not expose power tools to rain or wet
conditions. Water entering a power tool
will increase the risk of electric shock.
d. Do not abuse the cord. Never use the cord
for carrying, pulling or unplugging the
power tool. Keep cord away from heat,
oil, sharp edges or moving parts. Dam-
aged or entangled cords increase the risk
of electric shock.
e. When operating a power tool outdoors,
use an extension cord suitable for out-
door use. Use of a cord suitable for out-
door use reduces the risk of electric shock.
f. If operating a power tool in a damp loca-
tion is unavoidable, use a Ground Fault
Circuit Interrupter (GFCI) protected
supply. Use of a GFCI reduces the risk of
electric shock.
3. Personal safety
a. Stay alert, watch what you are doing and
use common sense when operating a
power tool. Do not use a power tool while
you are tired or under the inuence of
drugs, alcohol or medication. A moment
of inattention while operating power tools
may result in serious personal injury.
b. Use personal protective equipment.
Always wear eye protection. Protective
equipment such as a dust mask, non-skid
safety shoes, hard hat or hearing protec-
tion used for appropriate conditions will
reduce personal injuries.
c. Prevent unintentional starting.Ensure the
switch is in the off-position before con-
necting to power source and/or battery
pack, picking up or carrying the tool. Car-
rying power tools with your nger on the
switch or energizing power tools that have
the switch on invites accidents.
d. Remove any adjusting key or wrench be-
fore turning the power tool on. A wrench
or a key left attached to a rotating part
of the power tool may result in personal
injury.
e. Do not overreach. Keep proper footing
and balance at all times. This enables bet-
ter control of the power tool in unexpected
situations.
f. Dress properly.Do not wear loose
clothing or jewelry. Keep your hair and
clothing away from moving parts. Loose
clothes, jewelry or long hair can be caught
in moving parts.
1619PC8632_GEX18V-150-3 EXEX18V-150-5_OSI_20260211.indd 31619PC8632_GEX18V-150-3 EXEX18V-150-5_OSI_20260211.indd 32/13/2026 4:16:36 PM2/13/2026 4:16:36 PM
Product specificaties
| Merk: | Bosch |
| Categorie: | Schuurmachine |
| Model: | GEX18V-150-3 |
Heb je hulp nodig?
Als je hulp nodig hebt met Bosch GEX18V-150-3 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden