Bogen AT35A Handleiding

Bekijk gratis de handleiding van Bogen AT35A (2 pagina’s), behorend tot de categorie Niet gecategoriseerd. Deze gids werd als nuttig beoordeeld door 10 mensen en kreeg gemiddeld 5.0 sterren uit 4 reviews. Heb je een vraag over Bogen AT35A of wil je andere gebruikers van dit product iets vragen? Stel een vraag

Attenuators For 25V/70V Speaker Line

Models AT10Aand AT35A

Installation and Use Manual

These 10-step plus “off” speaker attenuators allow the volume of a network of 25V or 70V speakers to be controlled from

a remote location. The AT10Aattenuator can handle speaker loads of up to 10W (max.) and the AT35Aattenuator can

handle speaker loads of up to 35W (max.). The AT10Afits into a single gang electrical box and the AT35Ainto a double

gang electrical box. Volume reduction takes place in 3 dB increments except for the 2 lowest settings, which provide 6 dB

reduction increments. Aspeaker “off” (“0”) position is also provided.

Attenuator Wiring

©2005 Bogen Communications,Inc.

All rights reserved.

Specifications subject to change without notice.

54-2126-01A0501

Attenuator Settings

Speaker Installation

Red

Black

Green

Hot Lead

COM

Cable Shields

Cable to speakers

Speaker “+”

positive lead

Cable from amp or zone output

Wire Nuts (4)

Note:Cable shield is not

connected to the speaker -

the shield simply “floats.”

Speaker “-”

(negative) lead

Attenuator

STEPATTENUATION

100 dB (Full Volume)

9-3 dB

8-6 dB

7-9 dB

6-12 dB

5-15 dB

4-18 dB

3-21 dB

2-27 dB

1-33 dB

0Speaker Off

Product specificaties