Bogen AT10A Handleiding


Bekijk gratis de handleiding van Bogen AT10A (2 pagina’s), behorend tot de categorie Niet gecategoriseerd. Deze gids werd als nuttig beoordeeld door 7 mensen en kreeg gemiddeld 4.5 sterren uit 3 reviews. Heb je een vraag over Bogen AT10A of wil je andere gebruikers van dit product iets vragen? Stel een vraag

Pagina 1/2
Attenuators For 25V/70V Speaker Line
Models AT10Aand AT35A
Installation and Use Manual
These 10-step plus “off” speaker attenuators allow the volume of a network of 25V or 70V speakers to be controlled from
a remote location. The AT10Aattenuator can handle speaker loads of up to 10W (max.) and the AT35Aattenuator can
handle speaker loads of up to 35W (max.). The AT10Afits into a single gang electrical box and the AT35Ainto a double
gang electrical box. Volume reduction takes place in 3 dB increments except for the 2 lowest settings, which provide 6 dB
reduction increments. Aspeaker “off” (“0”) position is also provided.
Attenuator Wiring
©2005 Bogen Communications,Inc.
All rights reserved.
Specifications subject to change without notice.
54-2126-01A0501
Attenuator Settings
Speaker Installation
Red
Black
Green
Hot Lead
COM
Cable Shields
Cable to speakers
Speaker “+”
positive lead
Cable from amp or zone output
Wire Nuts (4)
Note:Cable shield is not
connected to the speaker -
the shield simply “floats.
Speaker “-”
(negative) lead
Attenuator
STEPATTENUATION
100 dB (Full Volume)
9-3 dB
8-6 dB
7-9 dB
6-12 dB
5-15 dB
4-18 dB
3-21 dB
2-27 dB
1-33 dB
0Speaker Off

Beoordeel deze handleiding

4.5/5 (3 Beoordelingen)

Product specificaties

Merk: Bogen
Categorie: Niet gecategoriseerd
Model: AT10A
Kleur van het product: Wit
Gewicht: 368 g
Afmetingen (B x D x H): 51 x 51 x 101 mm
Power handling: 10 W

Heb je hulp nodig?

Als je hulp nodig hebt met Bogen AT10A stel dan hieronder een vraag en andere gebruikers zullen je antwoorden