Blustream HEX100ARC-TX Handleiding

Blustream AV extender HEX100ARC-TX

Lees hieronder de 📖 handleiding in het Nederlandse voor Blustream HEX100ARC-TX (6 pagina's) in de categorie AV extender. Deze handleiding was nuttig voor 6 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/6

HEX100ARC

User Manual

HEX100ARC-RX

HEX100ARC-TX

HEX100ARC USER MANUAL

Surge protection device

recommended

This product contains sensitive electri-

cal components that may be damaged

by electrical spikes, surges, electric

shock, lightning strikes, etc. Use of

surge protection systems is highly

recommended in order to protect and

extend the life of your equipment.

Safety And

Performance Notice

The transmission distances of HDMI

over UTP cables are measured using TE

CONNECTIVITY 1427071-6

EIA/TIA-568-B termination (T568B) of

cables is recommended for optimal

performance.

To minimize interference of the un-

shielded twisted pairs in the CAT5e/6

cable do not run the HDBaseT /

Cat5e/6/6a cabling with or in close par-

allel proximity to mains power cables.

Do not substitute or use any other

power supply other than the enclosed

unit, or a Blustream approved re-

placement.

Do not disassemble either the Trans-

mitter or Receiver units for any reason.

Doing so will void the manufacturer’s

warranty.

Introduction 03

Features 03

Panel Descriptions 03/04

Application Diagram 04/05

Specifications 06

Package Contents 06

Maintenance 06

Contents

Thank you for purchasing

this product.

For optimum performance and safety,

please read these instructions care-

fully before connecting, operating or

adjusting this product. Please keep this

manual for future reference.

02 www.blustream.co.uk

Note: The POH function is designed for powering compatible transmitter or receiver units of Blustream only.

Do not connect any part of this equipment to Power over Ethernet devices. Damage may result.

Panel Description HEXARC100-RX

HEX100ARC-Rx Receiver

1 2 1 1 1 1 1 1 1 1

1 Optical audio in –TOSLINK audio in, connects to the

optical out of the display device

2 HDMI Out –Connect to HDMI input on display device

3 100BaseT Ethernet ports

1 IR Tx port - connect to IR emitter. Used to control display

device from control processor or IR sensor located at the

source end.

2 IR Rx port - connect to IR sensor. Used to control IR con-

trolled source devices at HEX100ARC-Tx end

3 RS232 port – Bi-directional RS232 with HEX100ARC-Tx

RS232 port

4 Audio return position switcher - switch between ARC and

TOSLINK (optical) modes

5 HDBT in - RJ45 connector, connect to HDbaseT port of

HEX100ARC Tx

6 Power LED indicator

7 Power port – can be powered from transmitter by using

the power over cable (POH) feature

HEX100ARC USER MANUAL

Our Platinum Range of HDBaseT™ products oer the very best in performance and

flexibility. The HEX100ARC extender set is an industry leading 4K UHD HDBaseT™ solution

delivering HDMI, Bi-directional IR and PoH (PoE) up to lengths of 100m over a single

CAT cable. The HEX100ARC also provides enhanced features including ARC and Audio

breakout, RS-232 pass through, and an integrated 3-way Ethernet switch.

Introduction

FEATURES:

• Extends HDMI up to a distance of 100m over single CAT

cable

• Supports 4K UHD video up to 70m (3840 x 2160 @30Hz

4:4:4, 4096 x 2160 @24Hz 4:4:4, and 4K @60Hz 4:2:0)

• Supports all industry standard video resolutions including

VGA-WUXGA and 480i-4K

• Supports 3D signal display

• Supports ARC (Audio Return Channel) from display via

HDMI and Optical digital inputs

• Supports audio breakout via analogue L/R audio or optical

digital outputs

• Supports all known HDMI audio formats including Dolby

TrueHD, Dolby Atmos, Dolby Digital Plus and DTS-HD

Master Audio transmission

• Integrated 3-port Ethernet switch (LAN Serving)

• Supports bi-directional RS-232 pass through

• Supports bi-directional IR from all input and output

locations

• Supplied with Blustream IR receiver and emitters

• Supports bi-directional PoH (Power over HDBaseT™) to

power extenders from either transmitter or receiver end

• HDCP compliant

contact support@blustream.co.uk / support@blustream.com.au

Product specificaties

Merk:	Blustream
Categorie:	AV extender
Model:	HEX100ARC-TX
Kleur van het product:	Zwart
Gewicht verpakking:	1350 g
Breedte verpakking:	340 mm
Diepte verpakking:	285 mm
Hoogte verpakking:	60 mm
Soort:	AV-zender
Gebruikershandleiding:	Ja
LED-indicatoren:	Ja
Montage gereedschap:	Ja
Connectiviteitstechnologie:	Bedraad
Ethernet LAN:	Ja
Ondersteunde video-modi:	480i, 1080p
Maximum resolutie:	4096 x 2160 Pixels
Soort serieële aansluiting:	RS-232
HDCP:	Ja
Maximale refresh snelheid:	60 Hz
Aansluiting voor netstroomadapter:	Ja
3D:	Ja
Ondersteunde grafische resoluties:	3840 x 2160,4096 x 2160
Remote (IR) ingang:	1
Audio (L,R) out:	1
Digitale audio, optische uitgang:	1
Temperatuur bij opslag:	-20 - 60 °C
Externe adapter:	Ja
Output current:	2 A
Remote (IR) uitgang:	1
Power over Ethernet (PoE):	Ja
HDMI in:	1
RS-232 uitgangspoorten:	1
RJ-45 uitgang ports:	1
HDCP versie:	1.4
Seriële poort(en):	1
HDBaseT-poort:	Ja
Maximaal bereik:	100 m
Bedrijfstemperatuur (T-T):	0 - 40 °C
Consumer Electronics Control (CEC)-ondersteuning:	Ja
Transmitter afmetingen (WxDxH):	115 x 135 x 25 mm
Transmitter gewicht:	500 g
Inclusief IR-ontvanger:	Ja
Bedrijfsspanning (zender):	15 V
Bidirectioneel:	Ja
IR-emitter inbegrepen:	Ja
RS-232-passthrough:	Ja