Blustream HEX11WP-TX Handleiding

Blustream AV extender HEX11WP-TX

Bekijk gratis de handleiding van Blustream HEX11WP-TX (4 pagina’s), behorend tot de categorie AV extender. Deze gids werd als nuttig beoordeeld door 71 mensen en kreeg gemiddeld 4.7 sterren uit 36 reviews. Heb je een vraag over Blustream HEX11WP-TX of wil je andere gebruikers van dit product iets vragen? Stel een vraag

Download PDF

Pagina 1/4

HEX11WP-TX QUICK REFERENCE GUIDE

contact: support@blustream.co.uk / support@blustream.com.au

HEX11WP-TX

Quick Reference Guide

Our HEX11WP HDMI wall plate HDBaseT™ Transmitter is a 4K solution that extends

HDMI up to 70m at 1080p (40m at 4K 60Hz 4:2:0). The HEX11WP-TX has been

designed to work with all Blustream HDBaseT™ Receiver and Matrix solutions, be

installed in both UK and European backboxes and can be powered locally or from

compatible Blustream HDBaseT™ products.

Introduction

FEATURES:

• Advanced HDBaseT™ technology oering distribution of video and audio over a single CAT cable

• Supports 4K UHD video up to 40m (3840 x 2160 @30Hz 4:4:4, 4096 x 2160 @24Hz 4:4:4, and 4K @60Hz 4:2:0)

• Extends HDMI at 1080p up to a distance of 70m

• Supports all known HDMI audio formats including Dolby TrueHD, Dolby Atmos, Dolby Digital Plus and DTS-HD

Master Audio transmission

• Supports 12V-48V PoC from compatible Blustream HDBaseT™ Receiver / Matrix products

• Bi-directional RS-232 pass through

• Supports IR pass-through to HDBaseT™ device

• Compatible with all Blustream HDBaseT™ Receiver / Matrix products*

• Magnetic faceplate surround allowing both UK & EU backbox compatibility

• HDCP 2.2 support

*Technical performance is subject to the features supported on the connected HDBaseT™ device

HEX11WP-TX QUICK REFERENCE GUIDE

www.blustream.com.au / www.blustream.co.uk

Front Panel Description

1 Power status indicator - Illuminates when powered

2 HDBaseT™ link status indicator - Illuminates when the Transmitter is connected to a HDBaseT™ Receiver / Matrix

product successfully

3 IR Receiver - Built in IR sensor for IR passthrough

4 HDMI input - Type A HDMI port to connect HDMI source

5 HDBaseT™ output - RJ45 HDBaseT™ port to connect to the input port of the compatible Blustream HDBaseT™

HDBaseT™ Receiver / Matrix device

6 12V DC input - 2-pin phoenix connector to connect to Blustream 12V power supply (supplied)

7 IR Receiver Input - 3-pin phoenix connector to connect to Blustream IR Receiver (not supplied)

8 RS-232 - 3-pin phoenix connector for RS-232 passthrough to / from compatible Blustream HDBaseT™ device

1 2 3 4

6 7 85

Rear Panel Description

EDID Management

Please note this unit does not feature EDID management. As HDBaseT is limited to 10.2Gbps video signals, please

make sure your source device only outputs a HDMI signal within this bandwidth. A video signal beyond 10.2Gbps of

bandwidth will not be passed through this device resulting in a blank screen.

HEX11WP-TX QUICK REFERENCE GUIDE

contact: support@blustream.co.uk / support@blustream.com.au 03

Example Schematic

Product specificaties

Merk:	Blustream
Categorie:	AV extender
Model:	HEX11WP-TX
Kleur van het product:	Roestvrijstaal
Breedte:	146 mm
Diepte:	86 mm
Hoogte:	6 mm
Gewicht verpakking:	2100 g
Soort:	AV-zender
Gebruikershandleiding:	Ja
Montage gereedschap:	Ja
Connectiviteitstechnologie:	Bedraad
Maximum resolutie:	4096 x 2160 Pixels
Certificering:	RoHS, CE, FCC
HDCP:	Ja
Maximale refresh snelheid:	60 Hz
Materiaal:	Metaal
Remote (IR) ingang:	1
Aantal per verpakking:	1 stuk(s)
HDMI in:	1
RS-232 uitgangspoorten:	1
IR-doorvoer:	Ja
Aantal HDMI-uitgangen:	1
Maximaal bereik:	70 m
Consumer Electronics Control (CEC)-ondersteuning:	Ja
Transmitter afmetingen (WxDxH):	36 x 76 x 44 mm
HDCP-passthrough:	Ja
RS-232-passthrough:	Ja
CEC-passthrough:	Ja