Blustream Dante DA11ADE-V2 Handleiding

Bekijk gratis de handleiding van Blustream Dante DA11ADE-V2 (4 pagina’s), behorend tot de categorie Niet gecategoriseerd. Deze gids werd als nuttig beoordeeld door 32 mensen en kreeg gemiddeld 4.4 sterren uit 7 reviews. Heb je een vraag over Blustream Dante DA11ADE-V2 of wil je andere gebruikers van dit product iets vragen? Stel een vraag

DA11ADE-V2QUICK REFERENCE GUIDE

01

Contact: support@blustream.com.au | support@blustream-us.com | support@blustream.co.uk

Our DA11ADE-V2 has been designed to decode two Dante® digital signals to two

unbalanced or balanced analogue audio channels. The DA11ADE-V2 is a plug

& play device that is powered using either PoE (Power Over Ethernet) from any

PoE network switch or via local a 12V power supply input. The DA11ADE-V2 also

supports AES67 RTP audio transport. The in-built web interface module can be

used for configuration and control of the device.

Introduction

DA11ADE-V2

Quick Reference Guide

• Decodes two Dante® digital signals to two unbalanced or balanced analogue audio channels

• Supports 44.1, 48, 88.2 & 96 KHz sample rates @ 16/24/32 Bit

• Configurable Dante® device latency (supports 2-10ms configurable using Dante® Controller)

• Supports AES67 RTP audio transport

• Web interface module for control and configuration of the device

• Features Class 0 802.3af PoE for powering of product from any PoE switch

• Local 12V power supply input for when network switch does not support PoE*

* PS121PH power supply sold separately

FEATURES:

Connections:

1Dante® Audio Input - RJ45 socket connects Dante® network.

2DC Input - Connect to +12VDC power supply (not supplied) if

device is not powered via a PoE switch

3Audio Output - Phoenix Connector accepts balanced or

unbalanced 2 channel audio output.

Front Panel

1

Rear Panel

3

Wiring Configuration

Balanced - XLR

Unbalanced - RCA

+

-

-

+

2

Product specificaties