Bluesound POWERNODE 2 Handleiding

Bluesound Mediaspeler POWERNODE 2

Lees hieronder de 📖 handleiding in het Nederlandse voor Bluesound POWERNODE 2 (4 pagina's) in de categorie Mediaspeler. Deze handleiding was nuttig voor 49 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/4

Owner’s Manual

Included Accessessories

Welcome to Bluesound, Hi-Fi for the Wi-Fi generation.

Bluesound transforms your local digital music library by putting the music of your life right at your ngertips.

The clutter of CDs is relegated to a previous era! Your smartphone, desktop or tablet running the Bluesound App

now controls your music.

Your Bluesound music system is also a sophisticated Internet streaming device that allows you to listen to a

wide range of Internet music service providers. Bluesound also provides access to music subscription services

featuring extensive catalogs of millions of songs streamed to you over the internet in real time. TuneIn Radio

makes every radio station in the world a local station via the magic of the internet.

To take full advantage of all these Bluesound capabilities requires a robust wired or wireless home network

and a reliable high speed Internet connection, provided by a DSL or Cable modem. Internet access must be

contracted and installed by your local Internet Service Provider. For remote areas there are satellite options for

high speed internet access.

Before signing on to a music subscription or cloud service we suggest that you review your Internet service plan

and be sure you have enough internet speed and bandwidth to provide uninterrupted streaming. Most internet

service providers offer multiple plans and can help you make the best choice.

For detailed instructions on how to control your Bluesound player, visit our website at : www.bluesound.com.

120V AC Power Cord Ethernet Cable

230V AC Power Cord Mini Jack to Toslink Adaptor

Amplied Wireless

Streaming Music Player

100-240V~50/60Hz

POWER RATING: 100- 240 V~50 /60H z 150 W

Bluesound International

63 3 Granit e Court, Pickering, ON Canada L1W 3K1

MODEL : POWER NODE 2

AMPLIFIED WIRELESS STREAM ING MUSIC PLAYER

ANALOG IN SUBW SERVICEUSB

OPTICAL IN

SPEAKERS

RIGHT LEFT

USB | LAN IR IN

STATUS INDICATOR

Below is a table of the LED blink codes and their corresponding descriptions.

LED BLINK CODE DESCRIPTION

Short blue ash, then red Powering up, rebooting the unit

Solid green Hotspot Mode

Flashing green Connecting to Network shares

Solid red Cannot boot; drive error

Red pulse No internet gateway

White pulse Software update available

Solid red Upgrade mode

Alternate ashing red and green Upgrading…

Flashing blue Mute mode

Solid white Indexing

Solid blue Connected to Network – ready to use with Bluesound App

Flashing red Factory reset in progress

65 7

10 1211

8 9

LED/MUTE BUTTON : This button has multiple functions - an indicator of network connectivity and a

MUTE button. For a full listing of LED Blink Codes, please see #1 – Blink Codes. Press to temporarily mute

audio output. Press again to restore audio from mute mode. When MUTE mode is selected the LED indicator

will ash blue.

+, - (VOLUME) : Toggle either button to vary volume level. Volume level will not change if you press and hold either button.

(+) : Increase volume level

(-) : Decrease volume level

PREVIOUS TRACK/NEXT TRACK : These buttons can be used to go back to the previous track or skip to the ◄◄

next track in your current playlist.►►

OPTICAL IN/ANALOG IN : Using a 3.5mm Stereo Audio Cable (not provided), connect one end to the Analog

In of the POWERNODE 2 and the other end to the corresponding analog output of other compatible devices.

The source will show as an Analog Input in the Navigation Drawer of the Bluesound app. Using an Optical to

3.5mm convertor (included with the POWERNODE 2), a digital optical source can also be added. This will

appear as Optical Input in the Navigation Drawer.

SUBW (SUBWOOFER) OUT : A Subwoofer can also be connected directly to the POWERNODE 2. Connect

SUBW OUT to a powered (“active”) subwoofer.

USB (TYPE A) : Connect a USB mass storage device or Bluetooth adaptor to the USB input. Typical USB mass

storage devices compatible with the POWERNODE 2 include portable ash memory devices and external

hard drives (FAT32 formatted).

IR IN : An infrared extender can be connected to allow for programmable learning remotes to control volume

and source selection when a POWERNODE 2 is stored in a way that the front panel IR sensor is not visible.

SERVICE : Use the SERVICE port in conjunction with USB (Type B Mini) to initially load rmware on the Player.

This is not for consumer use. Only Authorized Bluesound Service personnel can access this USB port and

SERVICE control button.

LAN PORT : The LAN PORT connection can be used with the Ethernet cable provided. This is an optional

connection since the POWERNODE 2 can be connected to the network through a Wi-Fi connection to your

router. To setup the POWERNODE 2 using the LAN Port a Wired Ethernet connection is required. Using the

Ethernet cable provided, connect one end of the Ethernet cable to the LAN port of your wired Ethernet

broadband router and the other end to the POWERNODE 2’s LAN port.

SPEAKERS : Connect the right speaker to the terminals marked “R+” and “R-” ensuring that “R+” is connected

to the “+” terminal on your loudspeaker and “R-” is connected to the loudspeaker’s “-” terminal. Repeat for the

left speaker using “L+” and “L-“. Use extra care to ensure that no stray wires or strands cross between posts or

terminals at either end.

AC MAINS INPUT : The POWERNODE 2 comes supplied with two separate AC power cords. Select the AC

power cord appropriate for your region. Before connecting the plug to the wall outlet, connect rmly the other

end of the AC power cord to POWERNODE 2’s AC Mains input socket. Never force the plug into a wall outlet.

An adaptor may be necessary in certain regions. Always disconnect the plug from the wall outlet rst, before

disconnecting the cable from the POWERNODE 2’s AC Mains input socket.

FRONT PANEL HEADPHONE JACK : A 3.5mm headphone jack is located on the front of the POWERNODE 2.

Product specificaties

Merk:	Bluesound
Categorie:	Mediaspeler
Model:	POWERNODE 2
Kleur van het product:	Wit
Ingebouwd display:	Nee
Gewicht:	1720 g
Breedte:	220 mm
Diepte:	190 mm
Hoogte:	70 mm
LED-indicatoren:	Ja
Bluetooth:	Ja
Aan/uitschakelaar:	Ja
Frequentie van processor:	1 MHz
Wi-Fi-standaarden:	802.11b, 802.11g, Wi-Fi 4 (802.11n)
Ondersteund audioformaat:	AAC, AIFF, FLAC, MP3, OGG, WAV, WMA
Ondersteunde videoformaten:	Niet ondersteund
Ethernet LAN:	Ja
Meegeleverde kabels:	AC, LAN (RJ-45), TOSLINK Digital Optical
Geïntegreerde geheugenkaartlezer:	Nee
Aantal USB 2.0-poorten:	2
Aantal Ethernet LAN (RJ-45)-poorten:	1
Volumeregeling:	Digitaal
Volledige HD:	Nee
HDCP:	Nee
Processor architectuur:	Cortex-A9
Ondersteund beeldformaat:	JPG
Opslagmedia-type:	Niet beschikbaar
Audio (L,R) out:	1
Type processor:	Ja
Ethernet LAN, data-overdrachtsnelheden:	10,100,1000 Mbit/s
Temperatuur bij opslag:	-10 - 50 °C
aptX-technologie:	Ja
Totale opslagcapaciteit:	0 GB
Luchtvochtigheid bij opslag:	20 - 80 procent
Audio-uitgangskanalen:	- kanalen
Signaal/ruis-verhouding:	110 dB
Internet radio:	Ja
Ondersteunde frequentiebanden:	Niet ondersteund
Internet radio services ondersteund:	TuneIn, iHeartRadio
Totale harmonische vervorming (THD):	0.02 procent
Ingebouwde opslagmedia:	Nee
Wifi:	Ja
AC-ingangsspanning:	100-240 V
Stroomverbruik (typisch):	12 W
Bedrijfstemperatuur (T-T):	0 - 40 °C