Blodgett FlavorSmoke 450 Handleiding

Blodgett Niet gecategoriseerd FlavorSmoke 450

Bekijk gratis de handleiding van Blodgett FlavorSmoke 450 (9 pagina’s), behorend tot de categorie Niet gecategoriseerd. Deze gids werd als nuttig beoordeeld door 4 mensen en kreeg gemiddeld 4.4 sterren uit 2.5 reviews. Heb je een vraag over Blodgett FlavorSmoke 450 of wil je andere gebruikers van dit product iets vragen? Stel een vraag

Pagina 1/9
FLAVORSMOKE 450
Installation Operation Maintenance
Installation Fonctionnement Entretien
BLODGETT OVENS COMPANY
www.blodgett.com
42 Allen Martin Drive, Essex, VT 05452 802-658-6600
P/N 55228 Rev D (9/22)
FLAVORSMOKE 450 2
IMPORTANT
PROPERTY DAMAGE, INJURY OR DEATH. READ THE INSTALLATION, OPERATING AND MAINTENANCE INSTRUC-
TIONS THOROUGHLY BEFORE INSTALLING OR SERVICING THIS EQUIPMENT.
FOR YOUR SAFETY - Do not store or use gasoline or other ammable vapors or liquids in the vicinity of this or any other
appliance.
The information contained in this manual is important for the proper installation, use, and maintenance of this device. Ad-
herence to these procedures and instructions will result in satisfactory baking results and long, trouble free service. Please
read this manual carefully and retain it for future reference.
Errors: Descriptive, typographic or pictorial errors are subject to correction. Specications are subject to change without
notice.
ELECTRICAL RATINGS – 120VAC, 60 Hz, 1 phase, 7 amps.
ELECTRICAL CONNECTIONS
Before making any electrical connections to these appliances, check that the power supply is adequate for the voltage,
amperage, and phase requirements stated on the rating name plate mounted on the unit.
The circuit breaker that is used to provide power to this appliance must have a minimum of .076” (3mm) contact spacing.
The circuit breaker must meet all Local and National installation standards.
All appliances must be installed in accordance with Local or National Electrical codes.
WARNING!! - Improper installation may invalidate your warranty.
U.S. and Canadian Installations - A power cord is supplied with a plug attached. Plug the power cord into the appropriate
receptacle.
WARNING!! - If the supply cord is damaged, it must be replaced by a special cord or assembly available from the
manufacturer or its service agent.
3 FLAVORSMOKE 450
INSTALLATION
1. The smoker controller is to be attached to a panel of the oven.
2. Use the mounting plate as a drill jig template for drilling 3/16” holes to mount the plate. The mounting plate should be
located at a proper height for easy access. Note orientation of the mounting plate.
3. Attach the mounting plate to the inside of the body panel using the 4 screws provided (2 screws for top mount).
4. Once attached, reattach the body panel to the oven. The smoker controller can now be attached to the oven by
means of the keyhole slots.
FINISHED VIEW - SIDE MOUNT
EXLODED VIEW - SIDE MOUNT
EXLODED VIEW - TOP MOUNT FINISHED VIEW - TOP MOUNT


Product specificaties

Merk: Blodgett
Categorie: Niet gecategoriseerd
Model: FlavorSmoke 450

Heb je hulp nodig?

Als je hulp nodig hebt met Blodgett FlavorSmoke 450 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden