BlendMount BMG-2032 Handleiding

Bekijk gratis de handleiding van BlendMount BMG-2032 (2 pagina’s), behorend tot de categorie Niet gecategoriseerd. Deze gids werd als nuttig beoordeeld door 107 mensen en kreeg gemiddeld 4.8 sterren uit 9 reviews. Heb je een vraag over BlendMount BMG-2032 of wil je andere gebruikers van dit product iets vragen? Stel een vraag

PART# BMG-2032

Hien

ounf-

®

ESCORT

~1m111m111,11111t,

11

Innovat

ive

Mount

i

ng

So

l

ut

i

ons

LEFT HAND DRIVE VEHICLE

INSTALLATION INSTRUCTIONS

FOR

ESCORT

IX, REDLINE EX, AND 360C RADAR DETECTORS

Your rear view mirror has minimal clearance between the back side

of

the mirror and the mirror stem. It is very important

that this mount is installed correctly to ensure mirror adjustability is retained.

PLEASE READ THESE INSTRUCTIONS THOROUGHLY BEFORE INSTALLING THIS MOUNT

NOTE: For illustration purposes, the mount and rear view mirror shown

in

these instructions may look slightly different then YOUR

mount and rear view mirror.

3 -Install aluminum threaded

insert into magnet, and attach

magnet onto blendmount with lip

pointed in direction as shown.

MAGNET

1 -The magnet must be removed from the suction

cup mount that the radar detector came with.

UNSCREW

HERE

2 -Unscrew and remove bolt, only the

magnetic piece is used with the blendmount.

CLEARANCE

FOR MIRROR

STEM

4 -The Body Assembly must

be

removed to gain access to the CLAMP SCREW.

Remove the two socket head screws as shown above.

Be

sure to remove the lock

washer with the top screw along with the lock washer and flat washer with the

bottom screw. Loosen the Clamp Screw so there is enough clearance between

the TOP and MID SECTIONS to slide over the mirror stem.

PAGE 1 OF 2

Product specificaties