BlendMount BMG-2027 Handleiding
Pagina's 2 Engels Niet gecategoriseerd
Bekijk de handleiding van BlendMount BMG-2027 gratis online of download de PDF. Deze handleiding is 103 keer bekeken. Vraag over dit model? Stel een vraag
Bland
fflaunl-
ESCORT
1nnovarive
Mounting
Solutions
INSTALLATION INSTRUCTIONS FOR ESCORT IX, REDLINE EX, AND 360C
RADAR
DETECTORS
Your rear
view
mirror
has minimal clearance between
the
back
side
of
the
mirror
and the
mirror
stem.
It
Is
very
Important
that this mount I installed correctly to ensure mirror adju tabllity Is retained.
PLEASE READ THESE INSTRUCTIONS THOROUGHLY BEFORE INSTALLING THIS MOUNT
1 -The magnet must be removed
from the suction cup mount that
the radar detector came with.
MAGNET
2 • Unscrew and remove bolt, only
the magnetic piece is used with the
blendmount.
3 • Install aluminum threaded insert into magnet, and attach
magnet onto blendmount with lip pointed in direction as shown.
4 • Loosen the clamp screw so the top section separates from
the mid section. This will provide the necessary clearance to slide
the mount over the mirror stem as shown above.
Innovative De
ign
And
Precision Manufacturing
PAGE 1 OF 2
5 • Tighten the clamp screw until the Top and Mid Sections are slightly snug
around the mirror stem.
You
should still be able to move the mount along the
stem. Before fully tightening the clamp screw, slide the mount towards the wind-
shield as far as it will go. There should be approximately
11s
• between the back
of
the mirror and the mount as shown above.
BlendMount -US PATENT# D625,580 S, D656,811 S, 0653,980 S
D690,245
S,
D690,246 S, D690,247
Sand
other patents pending
Product specificaties
| Merk: | BlendMount |
| Categorie: | Niet gecategoriseerd |
| Model: | BMG-2027 |
Heb je hulp nodig?
Als je hulp nodig hebt met BlendMount BMG-2027 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden