Blaupunkt TW 1600.4 Handleiding

Blaupunkt Subwoofer TW 1600.4

Lees hieronder de 📖 handleiding in het Nederlandse voor Blaupunkt TW 1600.4 (4 pagina's) in de categorie Subwoofer. Deze handleiding was nuttig voor 30 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/4
Tw 1600.4
Blaupunkt India Private Limited
47, Atlanta Society, Nariman Point
Mumbai‐ 400 021. India.
Toll Free: 1800 209 6820
info@blaupunkt.in | www.blaupunkt.com
Sound | Subwoofer
45 Hz 30 Hz
Tw 1600.4
Recommended Woofer Enclosure
Sealed: 34 32.81
Tw 1600.4
Tw 1600.4
Warranty
We provide a manufacturer's warranty for our products
bought within India. You can view the warranty terms at
www.blaupunkt.com or ask for them directly at:
Blaupunkt India Private Limited
47, Atlanta Society, Nariman Point,
Mumbai 400 021. India.
Safety Notes:
Please observe the following safety notes during the
installation & connection.
ŸDisconnect the negative terminal of the battery.
Observe safety notes of the vehicle manufacturer.
ŸPrior to drilling mounting holes, make sure that no
cables & parts of the vehicle will be damaged.
ŸDo not install subwoofers on loose rear parcel
shelves (fastback vehicles)
ŸLeave ample clearance between the cables and
other harnesses. Use cable glands for holes with
sharp edges
Notes a bout instal ling a subwoofer in
enclosures:
Before installing the subwoofer in an enclosure
guidelines, please observe some fundamental design
instructions:
ŸSubwoofers with innite baffle can be installed in a
vehicle by simply using a wooden board trimmed to
size which ensures an acoustic separation between
the front and rear of a woofer. The wooden board is
affixed in the boot under the rear shelf or at the back
of the rear seat bench. Any existing air gaps should
be sealed with sealing material.
ŸThe shape of the enclosure plays a major role with
respect to the playback of low frequencies. However,
try to avoid unusual shapes which require extensive
work with respect to trimming and gluing.
ŸMDF boards or high-quality plywood made out of
birch with a thickness of 18 to 25mm are perfectly
suited for building woofer enclosures.
ŸAll abutting housing walls should be glued, screwed
together and sealed to avoid detachment due to
vibration & external environmental inuences in a
vehicle.
ŸTo avoid vibration, stiffening ribs or bracing are used
for large woofer enclosures.
ŸAcoustic insulating material which lls the inside
volume to at least 20% increases the effective
enclosure volume by 5 to 15%.
ŸThe cables from the amplier to the subwoofer
should be kept as short as possible & have a cross
2
section of at least 2.5mm .
ŸThenished subwoofer enclosure should be
perfectly stable and airtight.
ŸIf possible, use bass reex ports with a diameter of 7
to 10cm to avoid the port noise generally associated
with smaller openings. PVC pipes are available
commercially in different diameters. The pipe
sections can be installed inside the enclosure using
appropriate joints and ttings.
ŸUse an active (electronic) crossover, such as those
integrated into all Blaupunkt ampliers. The use of
passive crossovers is not recommended.
Performance
ŸMaximum power handling (Watts): 1500
ŸNominal power handling (RMS): 250W
ŸNominal impedance (Ohms): 4
ŸFrequency response (Hz): 30-300
ŸEfficiency (dB / 2.83V / 1m): 87dB
ŸDiameter Installation hole (mm): 282
ŸDiameter Installation hole (inch): 11.1
ŸThiele Small Parameter fs (Hz): 29.8
ŸThiele Small Parameter Qts: 0.62z
ŸThiele Small Parameter Qes: 0.61
ŸThiele Small Parameter Qms: 7.08
ŸThiele Small Parameter Vas (l): 93.25
ŸThiele Small Parameter Xmax (mm): 8
ŸRecommended sealed enclosure size: 1.2 cubic ft. (34 Liters)


Product specificaties

Merk: Blaupunkt
Categorie: Subwoofer
Model: TW 1600.4

Heb je hulp nodig?

Als je hulp nodig hebt met Blaupunkt TW 1600.4 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Subwoofer Blaupunkt

Handleiding Subwoofer

Nieuwste handleidingen voor Subwoofer