Blade Fusion 480 Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Blade Fusion 480 (26 pagina's) in de categorie Radiografisch bestuurbaar speelgoed. Deze handleiding was nuttig voor 19 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/26
Instruction Manual
Bedienungsanleitung
Manuel d’utilisation
Manuale di Istruzioni
EN
Safety Precautions and Warnings
Always keep a safe distance in all directions around your model to avoid
collisions or injury. This model is controlled by a radio signal subject to
interference from many sources outside your control. Interference can cause
momentary loss of control.
Always operate your model in open spaces away from full-size vehicles, traf c
and people.
Always carefully follow the directions and warnings for this and any optional
support equipment (chargers, rechargeable battery packs, etc.).
Always keep all chemicals, small parts and anything electrical out of the reach
of children.
Always avoid water exposure to all equipment not specifi cally designed and
protected for this purpose. Moisture causes damage to electronics.
Never place any portion of the model in your mouth as it could cause serious
injury or even death.
Never operate your model with low transmitter batteries.
Always keep aircraft in sight and under control.
Always activate throttle hold at rotor strike.
Always use fully charged batteries.
Always keep transmitter powered on while aircraft is powered.
Always remove batteries before disassembly.
Always keep moving parts clean.
Always keep parts dry.
Always let parts cool after use before touching.
Always remove batteries after use.
Never operate aircraft with damaged wiring.
Never touch moving parts.
Age Recommendation: Not for children under 14 years. This is not a toy.
WARNING: This is a large model helicopter with carbon fi ber blades that spin at very high RPM. Always use extreme caution and common sense when
maintaining and operating this product. If you are unsure about ANY function or procedure described in this manual, DO NOT operate. Contact Horizon
Product Support for assistance.
WARNING: Always ensure you are operating the helicopter a safe distance, 45 feet (13 meters), away from yourself and others.
WARNING: Read the ENTIRE instruction manual to become familiar with the features of the product before operating. Failure to operate the product
correctly can result in damage to the product, personal property and cause serious injury.
This is a sophisticated hobby product. It must be operated with caution and common sense and requires some basic mechanical ability. Failure to operate this
Product in a safe and responsible manner could result in injury or damage to the product or other property. This product is not intended for use by children without
direct adult supervision. Do not use with incompatible components or alter this product in any way outside of the instructions provided by Horizon Hobby, LLC. This
manual contains instructions for safety, operation and maintenance. It is essential to read and follow all the instructions and warnings in the manual, prior to as-
sembly, setup or use, in order to operate correctly and avoid damage or serious injury.
The following terms are used throughout the product literature to indicate various levels of potential harm when operating this product:
WARNING: Procedures, which if not properly followed, create the probability of property damage, collateral damage, and serious injury OR create a high probability
of super cial injury.
CAUTION: Procedures, which if not properly followed, create the probability of physical property damage AND a possibility of serious injury.
NOTICE: Procedures, which if not properly followed, create a possibility of physical property damage AND a little or no possibility of injury.
NOTICE
All instructions, warranties and other collateral documents are subject to change at the sole discretion of Horizon Hobby, LLC. For up-to-date product literature,
visit horizonhobby.com and click on the support tab for this product.
Meaning of Special Language
2
EN
To receive product updates, special offers and more, register your product at www.horizonhobby.com
Table of Contents
Length 38.6 in (980mm)
Main Rotor Diameter 43.1 in (1095mm)
Tail Rotor Diameter 9.1 in (232mm)
Components Needed to Complete ...................................................................... 3
Assembly Guide Legend ..................................................................................... 3
Tools Needed To Complete ................................................................................ 3
! BEFORE STARTING ASSEMBLY! .......................................................................4
Head Assembly ..................................................................................................4
Frame Assembly ................................................................................................5
Tail Assembly ................................................................................................... 11
Flight Controller Mounting ................................................................................15
Battery Installation ........................................................................................... 15
Helicopter Setup ..............................................................................................15
Main Rotor Alignment ......................................................................................16
Throttle Hold .................................................................................................... 16
Control Tests .................................................................................................... 16
Tail Rotor Blade Installation ..............................................................................18
Main Rotor Blade Installation ...........................................................................18
Canopy Installation ..........................................................................................18
Flight Guidelines and Warnings ........................................................................19
Flying Your Fusion 480 ..................................................................................... 19
Blade Tracking ................................................................................................. 19
Post-Flight Inspection and Maintenance ........................................................... 19
Troubleshooting Guide .....................................................................................20
Limited Warranty .............................................................................................20
Warranty and Service Contact Information .......................................................21
Exploded View .................................................................................................84
Parts List .........................................................................................................86
Recommended Components ............................................................................ 87
Optional Parts .................................................................................................. 87
Specifi cations
3
Recommended Component
Motor Brushless Motor 4320-1300kV (BLH4953)
ESC Talon 90-Amp 25V BL ESC W/20amp BEC (CSE010009700)
Battery 4400mAh 6S 22.2V 30C LiPo, 10AWG EC5 (EFLB44006S30)
Receiver AR7210BX DSMX FBL Control System (SPMAR7210BX)
Swash Servos H6050 Heli Cyclic Servo (SPMSH6050), metal gear servos required
Tail Servo H6060 Heli Tail Servo (SPMSH6060), metal gear servo required
Charger DC Li-Po Balancing Charger
Transmitter DSM2®/DSMX® Compatible Transmitter
Components Needed to Complete Tools Needed To Complete
Medium strength thread-locking compound
High strength thread-locking compound
1.5mm, 2mm, 2.5mm, 3mm and 4mm hex drivers
Ball link pliers
Needle nose pliers
Pitch gauge
Metric ruler or calipers
Assembly Guide Legend
Apply NO Thread-locking Compound
Apply Medium Thread-locking Compound
Apply High Strength Thread-locking Compound
Loosely Tighten
Fully Tighten


Product specificaties

Merk: Blade
Categorie: Radiografisch bestuurbaar speelgoed
Model: Fusion 480
Kleur van het product: Meerkleurig
Materiaal behuizing: Koolstofvezel
Lengte: 980 mm
Aantal: 1
Geschikt voor buitengebruik: Ja
Type product: Helikopter
Type motor: Elektromotor
Aantal propellers: 2 propellers
Diameter rotor: 1095 mm
Reproductie: Nee
Lengte hoofdblad: 480 mm
Stabilisatiesysteem: Flybarloze (FBL) rotorkop
Rotorconfiguratie: Collectieve pitch
Diameter staartrotor: 232 mm

Heb je hulp nodig?

Als je hulp nodig hebt met Blade Fusion 480 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Radiografisch bestuurbaar speelgoed Blade

Handleiding Radiografisch bestuurbaar speelgoed

Nieuwste handleidingen voor Radiografisch bestuurbaar speelgoed