Blackmore BJS-152BT Handleiding

Bekijk gratis de handleiding van Blackmore BJS-152BT (5 pagina’s), behorend tot de categorie Speaker. Deze gids werd als nuttig beoordeeld door 23 mensen en kreeg gemiddeld 4.7 sterren uit 4 reviews. Heb je een vraag over Blackmore BJS-152BT of wil je andere gebruikers van dit product iets vragen? Stel een vraag

Samson Electronics Inc.

3400 E. Slauson Ave.

Maywood, CA 90270

Ph: 323.585.6393

Fax: 323.585.6202

Web:http://www.blackmoremobile.com

BJS-152BT Portable Amplified Loudspeaker

Introduction:

The BJS-152BT is an amplified speaker with built in audio playback function and PA capabilities that produces 2100W of power.

This unit has USB, SD/MMC, Analog RCA Audio, dual ¼” Microphone and dual XLR inputs as well as Bluetooth connectivity for

wireless music streaming. It can function as a music player or a PA system with no extra components or accessories required. It

also includes an array of accent LED lights to lighten the mood of any party. Sound is reproduced via its 15” Subwoofer driver and

Titanium domed tweeter matched to the pre molded horn of the cabinet. The unit is constructed from durable and strong,

molded ABS plastic with steel mesh grills for the drivers, built in caster wheels and a speaker pole slot for integration with

mounting hardware and trusses.

Features:

Amplified

Audio playback and PA capabilities

USB/SD/RCA In/RCA Out/dual XLR inputs/dual ¼” mic input

Bluetooth

2100W

LED lighting

Wireless Remote

Speaker pole slot

Wired Microphone Included

Weight: 33 pounds

Dimensions: 17 ½ “ X 27” X 13

Power Supply AC 110-240V 50/60 Hz

Caution:

Please read All Operating Instructions before using this product

Avoid electrical shock, DO NOT OPEN THIS UNIT, THERE ARE NO REPLACEABLE PARTS INSIDE. Please refer to

your warranty information for service.

Do not Expose this product to Moisture, Water, Rain or Snow. Keep away from direct heat sources. Damaged

items will not be accepted for warranty

Do not clean this unit with solvents or chemicals

Insure that all volume and gain controls are set to “0” when connecting source units

Only line level Signals should be used for source

Product specificaties