Black Lion Audio Bluey Handleiding

Black Lion Audio Processor Bluey

Lees hieronder de 📖 handleiding in het Nederlandse voor Black Lion Audio Bluey (2 pagina's) in de categorie Processor. Deze handleiding was nuttig voor 41 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/2

Audio ‘Lion Face’ logo, BLA, are trademarks

or registered trademarks of Black Lion Audio.

This manual and any associated intel-

lectual property are subject to copyright

protection. No part of this document may

be reproduced in any form without explicit

written consent from Black Lion Audio.

Notice

This manual provides general information, preparation for

use, installation and operating instructions for the Black Lion

Audio Bluey.

The information contained in this manual is subject to

change without notice. Black Lion Audio makes no warran-

ties of any kind with regard to this manual, including, but not

limited to, the implied warranties of merchantability and t-

ness for a particular purpose. Black Lion Audio shall not be

liable for errors contained herein or direct, indirect, special,

incidental, or consequential damages in connection with the

furnishing, performance, or use of this material.

Bluey

FET Limiting Amplier

Owner’s Manual

IMPORTANT SAFETY INSTRUCTIONS

1. Read these instructions.

2. Keep these instructions

3. Heed all warnings.

4. Follow all instructions.

5. Do not use this apparatus near water.

6. Clean only with dry cloth.

7. Install in accordance with the manufacturer’s instructions.

8. Do not install near any heat sources such as radiators, heat regis-

ters, stoves, or other apparatus that produce heat.

9. Do not defeat the safety purpose of the polarized or grounding-type

plug. A polarized plug has two blades with one wider than the other.

A grounding-type plug has two blades and a third grounding prong.

The wide blade or third prong is provided for your safety. If the pro-

vided plug does not t into your outlet, consult an electrician for

replacement of the obsolete outlet.

10. Protect the power cord from being walked on or pinched particular-

ly at plugs, convenience receptacles, and the point where they exit

from the apparatus. If the power cord becomes frayed, stop using

immediately.

11. Use only attachments/accessories specied by the manufacturer

12. Use only with a cart, stand, tripod, bracket or table specied by the

manufacturer, or sold with the apparatus. When a cart is used, use

caution when moving the cart/apparatus combination to avoid in-

jury from tip-over.

13. Unplug this apparatus during lightning storms or when unused for

long periods of time.

14. Refer all servicing to qualied service personnel. Servicing is re-

quired when the apparatus has been damaged in any way, such as

power supply cord or plug is damaged, liquid has been spilled or

objects have fallen into the apparatus, the apparatus has been ex-

posed to rain or moisture, does not operate normally, or has been

dropped.

15. This apparatus shall not be exposed to dripping or splashing, and

no object lled with liquids, such as vases, shall be placed on the

apparatus.

16. Note that this apparatus is not completely disconnected from the

AC mains service when the power switch is in the OFF position.

17. The mains plug or power inlet on the product is used as the discon-

nect device, so the disconnected device shall remain readily opera-

ble when reconnected.

18. Any changes or modications not expressly approved in this manu-

al could void your authority to operate this apparatus.

IMPORTANT !

Be sure to use a three prong AC cable that properly ts the power

source. Please use the correct fuse designated on the rear panel be-

fore plugging in the power cord. Improper selection can result in dam-

age to the unit that will not be covered under the warranty.

The lightning ash with an arrow-

head symbol within an equilateral

triangle is intended to alert the

user to the presence of uninsu-

lated “dangerous voltage” within

the product’s enclosure that may

be of sucient magnitude to

constitute a risk of electric shock

to persons.

The exclamation point within an equilateral triangle is intended to alert

the user to the presence of important operating and maintenance

(servicing) instructions in the literature accompanying the product.

The Black Lion Audio Bluey complies with all applicable / RoHS/

WEEE European Union directives.

Do not attempt to service this unit yourself, as it will void your warran-

ty. Please check your unit carefully upon receipt and return to place

of purchase immediately if there are any problems with the product.

After that, the standard Black Lion Audio 3 YEAR warranty will apply

to defects in materials and workmanship.

INTERNATIONAL

For service or warranty assistance, please contact the Black Lion Au-

dio distributor in your country through the dealer from whom you pur-

chased this product.

LIMITED 3 YEAR WARRANTY

Black Lion Audio’s Bluey is warranted by Black Lion Audio to be free

from defects in materials and workmanship for the period of THREE

(3) YEARS to the original purchaser. In the event of such defects, the

product will be repaired without charge or, at our option, replaced with

a new one if delivered to Black Lion Audio prepaid, together with a copy

of the sales slip or other proof of purchase date. The warranty excludes

problems due to normal wear, abuse, shipping damage or failure to use

the product in accordance with the specications.

All parts and labor are covered under this Limited Warranty. However,

if it is determined by Black Lion Audio that the device was damaged or

made defective through abuse, we reserve the right to charge the cus-

tomer for the cost of the repair.

Black Lion Audio shall not be liable for damages based upon inconve-

nience, loss of use of the product, loss of time, interrupted operation or

commercial loss or any other damages, whether incidental, consequen-

tial or otherwise. This warranty gives you specic legal rights, and you

may have other rights, which will vary from state to state.

This warranty is not transferable.

QUICK START GUIDE

On your sound system, mute your monitors and then using balanced

XLR cables, connect your Bluey to your mixing bus or patch bay. If you

are using two Blueys in parallel (or stereo), connect the RCA’s between

the two units. Set all controls to full counter-clockwise position, and all

pushbuttons deselected or in the off position. Set the COMP ON button

to the off position, bypassing the unit, and apply power.

Unmute the monitors, and verify that signal is passing to and from the

unit. Set the INPUT, OUTPUT, ATTACK and RELEASE controls to about

12 o’clock, set COMP MIX to full clockwise, select RATIO 4, and press the

ON pushbutton. Increase the INPUT until the meter is deecting a few

dB. Again, verify signal is passing through the unit.

Your Bluey is now ready for use!

1. Power Button: This turns the unit on and off.

2. Input: Sets the threshold and controls the level at which the com-

pressor starts compressing

3. Output: Applies makeup gain to compressed signal to compensate

for signal lost during compression

4. Attack: Controls the amount of time it takes for the unit to react to

an incoming signal

5. Release: Controls the speed at which the compressor releases the

compressed signal

6. Comp Mix: Allows the user to blend the dry uncompressed signal

with the wet compressed signal to allow more natural sounding

compression

7. Ratio: Controls the amount of compression applied (Yes, it does all-

buttons-in-mode)

8. Meter Mode: Selector switches GR meters the amount of gain re-

duction applied (+4 meters output level at 0 with +4dB output; +8

meters output level at 0 with +8dB output)

9. Power IEC Input: Power input jack

10. Voltage Selector: Set to correct voltage in country used in

11. XLR Output: Balanced line-level output

12. RCA Stereo Link: Use standard 2-conductor RCA cable for stereo

linking

13. XLR Input: Balanced line-level input.

Note: For proper performance, balanced XLR must be used for all in-

puts and outputs.

SPECIFICATIONS

Attack Continuously variable 20uS to 800uS

Release Continuously variable 50mS to 1200mS

Ratio Pushbutton selected 4:1, 8:1, 12:1, 20:1 and any

combination

Voltage 115VAC, 230VAC rear panel switchable

AC Mains Input IEC320-C14 standard plug

Fuse 50Hz uses F2AL both are 20mmx5mm

Dimensions Width 438mm (19”)

Height 88mm (2U)

Depth 250mm

Weight 8kg

5376 1

4 8

9 10 1211 13

Product specificaties

Merk:	Black Lion Audio
Categorie:	Processor
Model:	Bluey

Heb je hulp nodig?

Als je hulp nodig hebt met Black Lion Audio Bluey stel dan hieronder een vraag en andere gebruikers zullen je antwoorden

Uw naam*

Jouw email*

Schrijf hier uw vraag

Handleiding Processor Black Lion Audio

Black Lion Audio B172A Handleiding

6 April 2023

Black Lion Audio Bluey Handleiding

28 Januari 2023

Handleiding Processor

Nieuwste handleidingen voor Processor

Phoenix Gold DSP8.8 Handleiding

25 April 2024

Datapath iolite 12i Handleiding

8 April 2024

SEADA SW2016 Handleiding

25 Maart 2024

SEADA SWP02 Handleiding

25 Maart 2024

SEADA SW2036 Handleiding

25 Maart 2024

SEADA SWP04 Handleiding

25 Maart 2024

SEADA SW4018 Handleiding

25 Maart 2024

SEADA GM9 Handleiding

25 Maart 2024

SEADA G4K Pro Handleiding

25 Maart 2024

SEADA G44-HDMI Handleiding

25 Maart 2024