Black Box LB320A Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Black Box LB320A (2 pagina's) in de categorie Wifi-repeater. Deze handleiding was nuttig voor 18 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/2
724-746-5500 | blackbox.com724-746-5500 | blackbox.com 724-746-5500 | blackbox.com
Page 5 Page 6
© Copyright 2015. Black Box Corporation. All rights reserved.
Black Box and the Double Diamond logo are registered trademarks of
BB Technologies, Inc. Any other trademarks mentioned in this manual
are acknowledged to be the property of the trademark owners.
Quick Start Guide
Industrial Ethernet Extender, 10/100, 1-Port
LB320A
Black Box Tech
Support: FREE! Live.
24/7. Tech support
the way it should be.
Great tech support is just 60 seconds
away at 724-746-5500 or blackbox.com.
Order toll-free in the U.S.:
Call 877-877-BBOX
(outside U.S. call 1-724-746-5500)
FREE technical support
24 hours a day, 7 days a week:
Call 724-746-5500 or
fax 724-746-0746
Mailing address:
Black Box Corporation
1000 Park Drive
Lawrence, PA 15055-1018
Web site: www.blackbox.com
E-mail: info@blackbox.com
Customer
Support
Information
LB320A Quick Start Guide
lb320a_qsg_rev1
Distance and data rate for the Ethernet Extender port:
Table 6-1. Distance and Data Rate.
Distance (m) Data Rate (Mbps)
300 100
400 80
600 60
800 40
1200 20
2600 1
This distance/data rate information is measured
according to a testing standard in the laboratory. The
actual installation will be affected by the quality of the
copper wire and the impact of noise disturbance. The
connection speed will be affected.
724-746-5500 | blackbox.com724-746-5500 | blackbox.com 724-746-5500 | blackbox.com
LB320A Quick Start Guide LB320A Quick Start GuideLB320A Quick Start Guide
Page 3Page 2 Page 4
1. Unpacking
Unpack the items. Your package should include:
• One LB320A Industrial Ethernet Extender
• This printed quick start guide
If items are missing or damaged, contact Black Box
Technical Support at 724-746-5500 or info@blackbox.
com. Keep the carton and packing material.
2. Select a Location
• Installation: Desktop, Wallmount, DIN-Rail mount.
• Identify a power source within 6 feet (1.8 meters).
• Choose a dry area with ambient temperature
between +14 and +140º F (-10 and +60° C).
• Keep away from heat sources, sunlight, warm air
exhausts, hot-air vents, and heaters.
• Be sure there is adequate airflow.
• Keep the device at least 6-ft. (1.8-m) away from the
nearest source of electromagnetic noise, such as a
photocopy machine.
3. Connect to the Data Ports
1. Insert one end of the Ethernet cable into a switch
port.
2. Connect the other end into the Ethernet port of the
device.
3. Insert the voice grade copper wire between one
pair of Ethernet Extenders via the Ethernet Extender
port (RJ-11 connector or terminal block). One device
must be set to LOC mode and the other to Auto
mode when two devices are connected.
Figure 1. Front panel of the extender.
Table 1. LEDs on the extender.
LED Color Status
PWR Green ON = Receiving power
OFF = Power off
Ethernet Extender Port
Link Activity Green ON = Connection is
established
OFF = No connection is
established
Flashing = Port is sending
or receiving data
Per Green ON = Performance mode
OFF = Standard mode
RMT Green ON = Remote mode
LOC Green ON = Local mode
SYM Green ON = Symmetric mode
ASM Green ON = Asymmetric mode
Line Speed Green ON = Displays the link speed
in Mbps
10/100TX port
Link/Activity Green ON = Valid network
connection
OFF = No data transmission
on port
Flashing = Port is sending
or receiving data
Speed Yellow ON = Link speed
at 100 Mbps
OFF = Link speed
at 10 Mbps
4. Apply DC Power
Connect the supplied AC to DC power adapter to the
receptacle on the rear panel of the Ethernet Extender,
and then attach the plug into a standard AC outlet.
Figure 2. Back panel of the extender.
5. DIP Switch
Table 5-1. DIP Switches
Pin Up Down
DIP Switch 1 Auto mode Local mode
DIP Switch 2 Symmetric Asymmetric
DIP Switch 3 Performance Standard
6. Top Panel
Figure 3. Top panel of the extender.


Product specificaties

Merk: Black Box
Categorie: Wifi-repeater
Model: LB320A
Kleur van het product: Zwart
Gewicht: 150 g
Breedte: 80.3 mm
Diepte: 109 mm
Hoogte: 23.8 mm
LED-indicatoren: Ja
Montagewijze: Muur
Aantal Ethernet LAN (RJ-45)-poorten: 1
Vermogensverbruik (max): 4.2 W
Certificering: CE, UL60950-1, EN60950-1 EMI: FCC Part 15B, Class A; EN61000-6-4: EN55022, EN61000-3-2, EN61000-3-3 EMS: EN61000-6-2: ESD Standard: EN61000-4-2, EN61000-4-3, EN61000-4-4, EN61000-4-5, EN61000-4-6-8, EN61000-4-8, IEC60068-2-6, IEC60068-2-27
Duurzaamheidscertificaten: RoHS
RJ-11 ports kwantiteit: 1
Bekabelingstechnologie: 10/100Base-T(X)
Netwerkstandaard: IEEE 802.3, IEEE 802.3u, IEEE 802.3x
Datastroombeheer: Ja
Maximaal bereik: 2600 m
Overdrachtssnelheid: 100 Mbit/s
Auto MDIX IEEE: Ja
Auto-negotiation: Ja
Relatieve vochtigheid in bedrijf (V-V): 5 - 95 procent
Duplex systeem: Full, Half
Klemmenblokpoort: Ja
Packet forwarding rate (10 Mbps): 14880 pps
Packet forwarding rate (100 Mbps): 148810 pps

Heb je hulp nodig?

Als je hulp nodig hebt met Black Box LB320A stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Wifi-repeater Black Box

Handleiding Wifi-repeater

Nieuwste handleidingen voor Wifi-repeater