Black And Decker GT6030-QS Handleiding

Black And Decker Heggenschaar GT6030-QS

Lees hieronder de 📖 handleiding in het Nederlandse voor Black And Decker GT6030-QS (73 pagina's) in de categorie Heggenschaar. Deze handleiding was nuttig voor 22 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/73

Powerful Solutions TM

www.blackanddecker.eu

GT5026

GT6025

GT6026

GT6030

GT6530

GT7026

GT7030

ENGLISH

English

Intended use

Your Black & Decker hedge trimmer has been designed

for trimming hedges, shrubs and brambles. This tool

is intended for consumer use only.

Safety instructions

General power tool safety warnings

Warning! Read all safety warnings and all

instructions. Failure to follow all instructions may

result in electric shock, fire and/or serious injury.

Save all warnings and instructions for future reference.

The term “power tool” in all of the warnings listed below

refers to your mains operated (corded) power tool or battery

operated (cordless) power tool.

1. Work area safety

a. Keep work area clean and well lit. Cluttered and dark

areas invite accidents.

b. Do not operate power tools in explosive

atmospheres, such as in the presence of flammable

liquids, gases or dust. Power tools create sparks

which may ignite the dust or fumes.

c. Keep children and bystanders away while operating

a power tool. Distractions can cause you to lose

control.

2. Electrical safety

a. Power tool plugs must match the outlet. Never

modify the plug in any way. Do not use any adapter

plugs with earthed (grounded) power tools.

Unmodified plugs and matching outlets will reduce risk

of electric shock.

b. Avoid body contact with earthed or grounded

surfaces such as pipes, radiators, ranges and

refrigerators. There is an increased risk of electric

shock if your body is earthed or grounded.

c. Do not expose power tools to rain or wet conditions.

Water entering a power tool will increase the risk

of electric shock.

d. Do not abuse the cord. Never use the cord for

carrying, pulling or unplugging the power tool.

Keep cord away from heat, oil, sharp edges

or moving parts. Damaged or entangled cords

increase the risk of electric shock.

e. When operating a power tool outdoors,

use an extension cord suitable for outdoor use.

Use of a cord suitable for outdoor use reduces the risk

of electric shock.

f. If operating a power tool in a damp location

is unavoidable, use a Residual Current Device

(RCD) protected supply. Use of an RCD reduces

the risk of electric shock.

3. Personal safety

a. Stay alert, watch what you are doing and use

common sense when operating a power tool.

Do not use a power tool while you are tired or under

the influence of drugs, alcohol or medication.

A moment of inattention while operating power tools

may result in serious personal injury.

b. Use personal protective equipment. Always wear

eye protection. Protective equipment such as dust

mask, non-skid safety shoes, hard hat, or hearing

protection used for appropriate conditions will reduce

personal injuries.

c. Prevent unintentional starting. Ensure the switch

is in the off-position before connecting to power

source and/or battery pack, picking up or carrying

the tool. Carrying power tools with your finger on the

switch or energising power tools that have the switch

on invites accidents.

d. Remove any adjusting key or wrench before turning

the power tool on. A wrench or a key left attached

to a rotating part of the power tool may result in

personal injury.

e. Do not overreach. Keep proper footing and balance

at all times. This enables better control of the power

tool in unexpected situations.

f. Dress properly. Do not wear loose clothing

or jewellery. Keep your hair, clothing and gloves

away from moving parts. Loose clothes, jewellery

or long hair can be caught in moving parts.

g. If devices are provided for the connection of dust

extraction and collection facilities, ensure these

are connected and properly used. Use of these

devices can reduce dust related hazards.

4. Power tool use and care

a. Do not force the power tool. Use the correct power

tool for your application. The correct power tool will

do the job better and safer at the rate for which it was

designed.

b. Do not use the power tool if the switch does not turn

it on and off. Any power tool that cannot be controlled

with the switch is dangerous and must be repaired.

c. Disconnect the plug from the power source and/or

the battery pack from the power tool before making

any adjustments, changing accessories, or storing

power tools. Such preventive safety measures reduce

the risk of starting the power tool accidentally.

ENGLISH

Vibration

The declared vibration emission values stated in the

technical data and the declaration of conformity have been

measured in accordance with a standard test method

provided by EN 60745 and may be used for comparing

one tool with another. The declared vibration emission value

may also be used in a preliminary assessment of exposure.

Warning! The vibration emission value during actual

use of the power tool can differ from the declared value

depending on the ways in which the tool is used.

The vibration level may increase above the level stated.

When assessing vibration exposure to determine safety

measures required by 2002/44/EC to protect persons

regularly using power tools in employment, an estimation

of vibration exposure should consider, the actual conditions

of use and the way the tool is used, including taking account

of all parts of the operating cycle such as the times when

the tool is switched off and when it is running idle in addition

to the trigger time.

Labels on tools

The following pictograms are shown on the tool:

Electrical safety

This tool is double insulated; therefore no earth wire

is required. Always check that the power supply

corresponds to the voltage on the rating plate.

If the supply cord is damaged, it must be replaced by the

manufacturer or an authorised Black & Decker Service

Centre in order to avoid a hazard

Electric safety can be further improved by using a high-

sensitivity 30 mA residual current device (RCD).

Using an extension cable

Always use an approved extension cable suitable for the

power input of this tool (see technical data). The extension

cable must be suitable for outdoor use and marked

accordingly. Up to 30 m of 1.5 mm2 HO5V V-F extension

cable can be used without loss of product performance.

Before use, inspect the extension cable for signs of damage,

wear and ageing. Replace the extension cable if damaged or

defective. When using a cable reel, always unwind the cable

completely.

Features

1. Front handle

2. Front handle switch

3. Trigger switch

4. Blade

5. Blade sheath

6. Guard

This hedge trimmer has the following features for

your benefit:

Ergonomically formed handles for comfortable cutting.

Machined blades for improved cutting.

Dual action blades for reduced vibration.

Assembly

Warning! Before assembly, make sure that the tool

is switched off and unplugged and that the blade sheath

is fitted over the blades.

Fitting the handle (fig. A)

Slide the handle (1) over the blades (4).

Press the handle (1) into the location on the bottom

of the tool.

Secure the handle with the 4 screws (7) supplied.

Fitting the guard (fig. B)

Locate the guard (6) into the grooves on the tool.

Secure the guard (6) using the two screws (8) supplied.

Warning! Never use the tool without the guard.

Fitting the blade tip guard (fig. C)

An optional tip guard (10) is provided to protect the end of the

blades (4) when cutting near a hard surface.

Align the tip guard (10) with the 2 holes at the end of the

blade support.

Secure the tip guard with the two screws (9) supplied.

Connecting the tool to the mains (fig. D)

Unless the tool is fitted with a mains cable, you will need

to connect an extension cable to the power inlet.

Connect the female socket of a suitable extension cable

to the power inlet of the tool.

Loop the cable through the cable restraint (11) as

shown to prevent the extension cable from becoming

detached during use.

Insert the mains plug into a mains outlet.

Warning! To reduce the risk of injury, the user must

read the instruction manual.

Wear safety glasses or goggles and ear protection

when operating this tool

Wear gloves when operating this tool.

Immediately disconnect the cable from the mains

if it is damaged or cut.

Do not expose the tool to rain or high humidity.

Product specificaties

Merk:	Black And Decker
Categorie:	Heggenschaar
Model:	GT6030-QS
Kleur van het product:	Black, Orange
Gewicht:	4750 g
Stroombron:	AC
Aantal per verpakking:	1 stuk(s)
Onbelast toerental aantal slagen:	1400 spm
Motorvermogen:	650 W
Lemmetlengte:	600 mm
Bladtype:	Dubbel blad
Bladtand afstand:	30 mm