Binatone E3250 - Big Button Handleiding

Binatone Telefoon E3250 - Big Button

Lees hieronder de 📖 handleiding in het Nederlandse voor Binatone E3250 - Big Button (46 pagina's) in de categorie Telefoon. Deze handleiding was nuttig voor 45 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/46
Important note — emergency calls
The 3250 is not designed for making emergency e
calls when the mains power fails. So you should
make alternative arrangements for access to
Emergency Se vices.r
(This means that you should also have a basic
phone that does not need mains powe , connectedr
to your line so that you can make calls during a
power failure.)
If you need help 

The Binatone Help Line is available from 9.00 am to
5.00 pm, Monday to Frida , ony
01325 304 473
Unpacking your e3250
In the box are:
■the (up to six, depending oncordless handset
which 3250 system you have bought)e
■the base unit
■rechargeable and a batteries battery
compartment cover for each handset
■a for the base unittelephone line cable
■a for the basemains power lead and adapter
unit
■up to ïŹve , each with a separatecharger pods
mains power lead and adapter.
Keep the packaging materials in a safe place in
case you later need to transport the unit.
Keep your sales (till) receipt, which is your
guarantee.
E:\Binatone2003\e3 00\e3 00.vp4 4
11 March 2003 10:09:02
Color profile: Generic CMYK printer profile
Composite Default screen
Downloaded from manuals search enginewww.Manualslib.com
Where to ïŹnd it
Before you can use the handset to make calls
you will need to fit and fully charge the
batteries, as described on pages 4 and 5.
Please read the notes on pages 2 and 3
before you install the base unit.
PROG button
Press to start programming.
Press during a call to make
a note of a number in the
Notebook.
EARPIECE
too close to your ear
while the handset is ringing — the
ringing gets louder as it continues.
Don’t hold this
UP and DOWN buttonsâ–Č â–Œ
Press during a call to adjust the volume
in the earpiece.
Press to move through the list of stored
numbers or Caller Display records.
R (Recall) button
e
You may need this
during a call if your
3250 is connected to a
PBX, or if you use BT’s
Select Services.
MEMORY button
Press to store numbers in
memory and to make
calls to stored numbers.
HANDSET LOCATOR button
Press to make all registered
handsets ring, (useful if
you've forgotten where you
put a handset).
IN USE light
This comes on when any
of the handsets registered
to this base is on an
PHONE /OK button
Press to begin or answer a
telephone call.
Press while programming to
conïŹrm your selection.
If the display is blank
Press the button
to switch the handset on
When this shows ‘nearly empty’ ( ), put the handset onto
the base unit or charger pod as soon as possible, to charge
the batteries. While the batteries are being charged, this
s
y
mbol blinks.
Symbols on the display
The handset’s
number (1 if you
have a single system,
1, 2 or 3 if you have
a Twin or Triple
system)
The time is shown if you’ve
set the handset’s clock
The base unit’s number (1,
unless you have registered
your handset to more than
one base unit)
Intercom
call
Memory/
store
Indirect
network
Redialling
Caller
Display
This appears when the handset is dialling a non-local
number via an alternative network.provider’s
This appears when you’re using Last Number Redial.
This appears when you’re checking, or dialling from, the list
of Caller Display records.
This appears when the keypad is locked, or when
has been turned on.Call Barring
This flashes while your handset is ringing for an intercom call,
and comes on steadily when the call’s connected.
This comes on when you’re storing numbers in memory, and
when you’re making calls to stored numbers.
Keypad
locked
Signal
level
This shows the strength of the signal between the handset
and base unit. It flashes while the handset is trying to
establish a radio link . .
to the base unit If this symbol flashes
while you’re on a call, move closer to the base unit
Battery
charge
level
New call This appears when you missed incoming calls (even if you
do not use Caller Display).
What the symbols mean
The duration of each call is shown on the display from 20 seconds
after you press the PHONE button for a line, until 5 seconds after
you end the call.
E:\Binatone2003\e3 00\e3 00_07.vp4 4
11 March 2003 10:09:39
Color profile: Generic CMYK printer profile
Composite Default screen
HANG UP / C (Cancel) button
1 second
3 seconds
Press to hang up at the end of a call.
Press for to lock the
keypad; or for to turn the
handset on and off.
While dialling or programming,
press briefly to delete digits from
the display; or press and hold to
clear the display.
LNR/ CDS/ AUSE buttonP
Press ONCE to make a repeat call
to one of the last five numbers
you dialled.
Press TWICE to see a list of Caller
Display records.
Press to generate pauses when
using the phone on a PBX.
INT ( ) button✱
Press to make an
intercom call.
SCROLL ( ) buttons✱
When a long number
#
(more than 16 digits) is
shown on the displa ,y
press these to scroll along
the digits.
external call.
Downloaded from manuals search enginewww.Manualslib.com
Contents
Read these notes ïŹrst 3
Choosing a site for the base unit and
charger pod 3
Radio signals between handset and
base unit 3
Mains power connection 3
Installation and set-up 4
Before you start 6
Electrical safety 6
Interference 6
‘Out of range’ warning 6
Switching on and oïŹ€ 7
To switch the handset on and oïŹ€ 7
To lock the keypad 7
Making and answering calls 8
To make a call 8
To answer a call 8
To end a call 8
Earpiece volume 8
Last Number Redial (LNR) 9
Memory dialling 10
To store a number 10
To make a memory call 10
Chain dialling 11
To change a stored number 11
To delete a stored number 11
To use the notebook 12
To store an LNR number in memory
13
Caller Display 14
To check Caller Display records 14
To return a call 15
To delete Caller Display records 15
To store a Caller Display number in
memory 15
Using a multi-handset system 16
To make an intercom call 16
To answer an intercom call 17
To end an intercom call 17
To transfer a call 17
To shuttle between two calls 18
To set up a three-way conference
18
New Call tone 19
To page all handsets from the
base unit 19
To register a new handset to your
base unit 20
To de-register a handset 21
To select a base unit 21
To register to a diïŹ€erent brand of
base unit 22
Customising your handset 23
General points 23
Auto-answer 23
Ringer volume and melody 24
Key tone 24
Direct Call 25
To clear all memories 26
To reset the handset 26
Continued overleaf

Binatone Help Line: 101325 304 473
E:\Binatone2003\e3 00\e3 00_07.vp4 4
11 March 2003 10:11:53
Color profile: Generic CMYK printer profile
Composite Default screen
Downloaded from manuals search enginewww.Manualslib.com


Product specificaties

Merk: Binatone
Categorie: Telefoon
Model: E3250 - Big Button

Heb je hulp nodig?

Als je hulp nodig hebt met Binatone E3250 - Big Button stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Telefoon Binatone

Handleiding Telefoon

Nieuwste handleidingen voor Telefoon