Big Ben QuickFire Destruction Pad Handleiding

Big Ben Controller QuickFire Destruction Pad

Lees hieronder de 📖 handleiding in het Nederlandse voor Big Ben QuickFire Destruction Pad (5 pagina's) in de categorie Controller. Deze handleiding was nuttig voor 36 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/5

PS3™ QUICKFIRE CONTROLLER

User’s Manual

Thank you for purchasing the Quickﬁ re controller for PS3™ from Bigben Interactive.

This product includes:

• 5 Preset quick ﬁ re modes for all your favourite games.

• Clear LCD screen.

• 8 shots per second up to 48 shots per second.

• Custom ﬁ ring mode – set your own quick ﬁ re rate from 6 shots per second up to a blistering 60 shots per second.

• Program any action buttons for rapid ﬁ re.

• Tilt sensors and vibration.

• Ergonomic, non slip triggers.

• Supplied with 2 AA Alkaline batteries.

Controller Set-Up and Use

Battery Installation

1. Remove the battery compartment cover from underneath the controller

2. Insert 2 x 1.5 volt AA size batteries, observing the correct polarity

3. Reﬁ t the battery compartment cover

Using the Controller with a PS3™.

Slide the switch on the Receiver Unit to PS3™ mode.

Receiver Connection

Plug the Receiver Unit into one of the USB ports on your PS3™ console. The Red LED on the Receiver Unit will ﬂ ash constantly.

Using your Controller

1. Switch on the controller by sliding the power On/Oﬀ switch, on the Controller, to on. When the controller has successfully connected with

the Receiver Unit the Red LED, on the receiver, will stop ﬂ ashing and be lit continuously.

2. Press the `PS Home’ button on the centre of the controller. This is the button with the house symbol.

3. The controller will connect to your PlayStation

®3 console and the numbered Red LED’s will light up showing your controller number.

4. Ensure that your contoller is assigned as controller 1.

If it is not recognised as controller 1, press and hold the home button to bring up the option menu, while you have a game loaded.

Select the controller settings and then select the ‘Reassign the Controller’ option.

Scroll down with the d-pad on the riﬂ e until it says 1 on the TV screen.

Press X to select it and then press O twice to go back to your game.

For further information on assigning controller ports please refer to your console instruction manual.

Quick ﬁ re modes

The Quickﬁ re controller has 6 diﬀerent quick ﬁ re modes to suit all of your favourite shooting games. The controller is set to mode 1, 8 shots

per second by default.

The mode is displayed on the LCD screen as M1 08SPS. Quick ﬁ re is set to the R1 button of your controller as this is the most common

ﬁ ring button for shooting games.

SEL ECT

ON OFF

ST A RT

M5 48 SP S

PRG

SEL ECT

ON OFF

ST A RT

M1 08 SPS

PRG

SEL ECT

ON OFF

ST A RT

M1 10 SPS

PRG

Changing the quick ﬁ re modes

The quick ﬁ re modes have been designed to work on all of your shooting games. To ensure full compatibility please select the correct mode

for your game.

The modes are as follow:

M1 8SPS – Call of Duty 4 Modern Warfare

M2 10SPS – Call of Duty World at War and Call of Duty: Black Ops

M3 20SPS – Call of Duty Modern Warfare 2

M4 32SPS – Call of Duty Modern Warfare 2

M5 48SPS - Call of Duty Modern Warfare 2

Please note that modes M4 and M5 may have varied results depending on which guns you are using in the game. If you experience

any problems, stick with the M3 mode. These modes will also work with other popular shooting games, like Battleﬁ eld™, Killzone™,

Resistance™ etc. Try the diﬀerent modes to select which works best.

To change between modes follow these steps.

1. Press start and select simultaneously to enter the programming mode.

2. Press up or down on the D-pad to cycle through the diﬀerent modes.

3. When you have found your correct mode press start and select again to conﬁ rm your selection.

4. The controller will now ﬁ re at your chosen speed when you press R1.

SEL ECT

ON OFF

ST A RT

M1 08 SPS

PRG

SEL ECT

ON OFF

ST A RT

M1 06 SPS

PRG

Custom quick ﬁ re mode

The quick ﬁ re controller also includes a custom mode to ensure future compatibility with new games and so you can experiment with

diﬀerent ﬁ ring rates. The rates can range for 6 shots to 60 shots per second.

To set the custom ﬁ ring rates follow these steps:

1. Press start and select simultaneously to enter the programming mode.

2. Press up or down on the D-pad to cycle through the diﬀerent modes and choose M6.

3. Then press the select button to enter the shots mode.

4. Press up or down on the D-pad to choose the shots per second you want.

5. Press start and select again to conﬁ rm your selection.

6. The controller will now ﬁ re at your chosen rate when you are in M6 mode.

SEL ECT

ON OFF

ST A RT

M1 08 SPS

P RG

SEL ECT

ON OFF

ST A RT

M6 06 SP S

PRG

SEL ECT

ON OFF

ST A RT

M1 06 SPS

PRG

SEL ECT

ON OFF

ST A RT

M6 14 SP S

PRG

SEL ECT

ON OFF

ST A RT

M6 10 SPS

PRG

Programming other buttons for rapid ﬁ re

By default, only the R1 button is used for quick ﬁ re, but if you are playing games that use another button for ﬁ ring, you can also program

them.

To set other buttons for quick ﬁ re, follow these steps:

1. Press the select and PS Home button on the controller simultaneously to enter the button programming mode. The LCD screen will

then display PRG.

2. Press the button you wish to program as quick ﬁ re (i.e. the triangle button) A triangle symbol will then appear on the LCD screen to

indicate it has been pressed.

3. Press select and PS Home again to conﬁ rm your selection. The triangle button will now act in quick ﬁ re mode. The button will remain

as a quick ﬁ re button even when you switch oﬀ your controller

SEL ECT

ON OFF

ST A RT

PRG

SEL ECT

ON OFF

ST A RT

PRG

SEL ECT

ON OFF

ST A RT

PRG

To set the button back to normal, follow these steps.

1. Press the select and PS Home button on the controller simultaneously to enter the button programming mode. The LCD screen will

then display PRG.

2. Press the button you wish to clear as quick ﬁ re (i.e. the triangle button) The triangle symbol will then disappear from the LCD screen

to indicate it has been pressed.

3. Press select and PS Home again to conﬁ rm your selection. The triangle button will set back to normal.

SEL ECT

ON OFF

ST A RT

PRG

SEL ECT

ON OFF

ST A RT

PRG

SEL ECT

ON OFF

ST A RT

PRG

Disable Quick ﬁ re on R1 button

If you do not want rapid ﬁ re on the R1 button you can disable it in the same way as mentioned above

1. Press the select and PS Home button on the controller simultaneously to enter the button programming mode. The LCD screen will

then display PRG.

2. Press the R1 The R1 symbol will then disappear from the LCD screen to indicate it has been pressed.

3. Press select and PS Home again to conﬁ rm your selection. The R1 button will set back to normal and will no longer have quick ﬁ re.

SEL ECT

ON OFF

ST A RT

P RG

SEL ECT

ON OFF

ST A RT

M1 08 SP S

SEL ECT S T ART

PRG

Clearing all programming

If you wish to set your controller back to default, simply switch it oﬀ and switch it back on again, whilst holding the start and select buttons

simultaneously. All controls will then be set to standard factory settings.

SEL ECT

ON OFF

ST A RT

SEL ECT

ON OFF

ST A RT

M1 08 SP S

PRG

Product specificaties

Merk:	Big Ben
Categorie:	Controller
Model:	QuickFire Destruction Pad
Kleur van het product:	Groen
Gewicht:	- g
Gewicht verpakking:	410 g
Breedte verpakking:	70 mm
Diepte verpakking:	180 mm
Hoogte verpakking:	210 mm
LED-indicatoren:	Ja
Gebruiksaanwijzing:	Ja
Connectiviteitstechnologie:	Draadloos
Ondersteund aantal accu's/batterijen:	2
Aantal:	1
Soort apparaat:	Gamepad
Aansluiting:	RF
Meegeleverde ontvanger:	Ja
Wireless ontvanger interface:	USB
(Buitenste) hoofdverpakking hoogte:	395 mm
(Buitenste) hoofdverpakking breedte:	370 mm
(Buitenste) hoofdverpakking brutogewicht:	9450 g
(Buitenste) hoofdverpakking lengte:	430 mm
Hoeveelheid per (buitenste) hoofdverpakking:	20 stuk(s)
(Binnenste) verzendverpakking gewicht:	4420 g
Pallet brutogewicht:	195000 g
Producten per pallet:	400 stuk(s)
Batterijen inbegrepen:	Ja
Aantal producten inbegrepen:	1 stuk(s)
Type batterij:	AA
Pallet brutohoogte:	1800 mm
Pallet brutobreedte:	800 mm
Pallet brutolengte:	1200 mm
(Binnenste) verzendverpakking hoogte:	185 mm
(Binnenste) verzendverpakking breedte:	350 mm
(Binnenste) verzendverpakking lengte:	415 mm
Producten per (binnenste) verzendverpakking:	10 stuk(s)
Gaming platforms ondersteund:	PC, Playstation 3
Programmeerbare knoppen:	Ja
Reflex vibratie:	Ja