Behringer V-Tone Guitar GDI21 Handleiding

Bekijk gratis de handleiding van Behringer V-Tone Guitar GDI21 (2 pagina’s), behorend tot de categorie Gitaarversterker. Deze gids werd als nuttig beoordeeld door 95 mensen en kreeg gemiddeld 5.0 sterren uit 8 reviews. Heb je een vraag over Behringer V-Tone Guitar GDI21 of wil je andere gebruikers van dit product iets vragen? Stel een vraag

BEHRINGER V-TONE GUITAR GDI21

WELCOME TO BEHRINGER

Thank you for showing your confidence in us by purchasing

the V-TONE GUITAR GDI21. This high-quality guitar modeling

driver is designed for hands-on musicians and no-frills types.

We have rebuilt different circuitries and components from famous

amps, and packed them into one housing. You can alternate

between several different amp re-creations, gain settings and

mic placements with a flick of a switchintuitively and with

minimal effort. In addition, the GDI21 functions as standard ultra-

transparent direct injection box when used in bypass mode.

A DI (Direct Injection) box allows you to send a signal directly

from an unbalanced, high-impedance output (like an electric guitar)

and connect it directly to the balanced mic input of a mixing

console.

Whether for stage, recording, rehearsal or warm-up,

BEHRINGERs V-TONE GUITAR GDI21 is a natural choice for all

players who want an arsenal of different tones.

CONTROL ELEMENTS

Control elements

The DRIVE control adjusts the overall amount of gain and

overdrive, similar to pushing the output section of a tube

amp.

The TREBLE control governs the high-frequency range of

the signal (+/-12 dB).

The BASS control allows you to boost/cut the low-

frequency range (+/-12 dB).

The LEVELcontrol adjusts the output level of the GDI21.

Use the AMP switch to select one of three great classic

tube amps. You will recognize these classic amp tones as

soon as you hear them. For crystal-clear, transparent

sounds with dynamic bass select TWE(E)D. For aggressive

mids and incredible sustain select BRIT(ISH). Rounder and

more evened-out (yet still sophisticated) sounds can be

dialed up if you select CALIF(ORNIAN); its perfect for

leads.

Use the MODE switch to dial up one of three gain settings

(HOT, HI G(AIN), CL(EA)N) that you want to combine with

the amp setting.

The MIC switch simulates the microphone placement

(orientation and distance) in relation to the cabinet. Select

CL(AS)SIC (distant mic placement without ambience) to

achieve high mid-range content and a greater definition of

notes like with classic early tube amps. In C(E)NT(E)R (close

miking at the center of a cone) you get greater high mid-

range content and increased low-end for mega crunchy

results. OFF (A)X(IS) (close miking at the edge of a cone)

is very similar to CENTER, but produces a smoother, softer

sound with less upper mid-range content; perfect in

combination with MODE position HOT.

When activated, the GND LIFT disconnects the ground

connection between input and output. Depending on the

grounding of the connected equipment, this can eliminate

hum or ground loops.

Use the footswitch to activate/deactivate all the tone

functions (EQ, DRIVE, modeling). When deactivated, the

GDI21 functions solely as a standard transparent DI box.

This LED illuminates when the effect is activated (see ).

Connectors

Use this 1/4" TS INPUT connector to plug in the instrument

cable of your guitar or other instruments.

BAL OUT is the GDI21s balanced mic level output. Use a

high-quality, balanced XLR (microphone) cable to connect

the driver to a mixing console.

The unbalanced 1/4" TS OUT connector sends the signal

to your guitar amp.

Bottom of the GDI21

SERIAL NUMBER. The serial number of the GDI21 is located

on the bottom.

BATTERY COMPARTMENT. Open the lid to install or

replace the 9 V battery (see also chapter POWER

REQUIREMENTS).

+The GDI21 is powered as soon you insert a plug

into the INPUT. The battery is disconnected when

the plug is removed. For this reason, the GDI21 has

no on/off switch. To prolong battery life, always

disconnect the input when the driver is not in use.

Product specificaties