Hotone Ampero Switch+ Handleiding
Hotone
Gitaarversterker
Ampero Switch+
Bekijk gratis de handleiding van Hotone Ampero Switch+ (3 pagina’s), behorend tot de categorie Gitaarversterker. Deze gids werd als nuttig beoordeeld door 3 mensen en kreeg gemiddeld 4.6 sterren uit 2 reviews. Heb je een vraag over Hotone Ampero Switch+ of wil je andere gebruikers van dit product iets vragen? Stel een vraag
Pagina 1/3

※In the interest of product improvement, the specifications and/or the content of products (including but not limited to appearances, packaging design, manual content, accessories, size, parameters and
display screen), are subject to change without prior notice. Please check with local supplier for exact offers. Specifications and features (including but not limited to appearances, colors and size) may vary by
model owing to environmental factors, and all images are illustrative.
MomentaryFootswitch
Operating Guide
ForAmperoIIStomp&AmperoIIStage

This operating guide is for how to set the Ampero Switch+ on Ampero II Stomp or Ampero II Stage. On both units,
Ampero Switch+ is connected and set in the same way, so the following steps will take Ampero II Stomp as an
example. If you want to set the Ampero Switch+ to control other device, please refer to the related contents of
your device manual.
How to connect
Connect one end of the TRS jack to Ampero Switch+ and the other end to the EXP/CTRL(FS4/5) jack of Ampero II Stomp
with the provided TRS cable
1/4"(6.35mm)StereoCable
1
1. In the main menu, click “GLOBAL” and then . Set “EXP/CTRL FUNC” to “Controls” “Dual FS” in the selection panel
Preface
How to set up

2
How to set up
2. “EXT FS1” and “EXT FS2” in the selection panel will become editable. The default is set to bank-/+.
3. “EXT FS1” corresponds to Ampero Switch Footswitch A and “EXT FS2” corresponds to Ampero Switch Footswitch B.
They can be set up as Follows:
Looper Rec/Play: Record/play loop phrases
Looper Stop: Stops looper playback
Looper: Enter/exit looper menu
Drum On/Off: Drum rhythm play/stop
Drum: Enter/exit drum menu
Tuner: Enter/exit tuner
Bank+/-: Change banks by toggling up or down
Tap Tempo: Tap tempo function
Patch+/-: Change patches by toggling up or down
EXP On/Off: Switching built-in expression pedal on/off
FX1, FX2, AMP, NR, CAB, EQ, FX3, DLY, RVB On/Off: Turn on/off each effect block
Plus:
When set EXP/CTRL FUNC to Single FS, the FS4 TAP defaults to Tap Tempo;
When set EXP/CTRL FUNC to Dual FS, the FS4 TAP defaults to Bank- and FS5 TAP defaults to Bank+.
Product specificaties
Merk: | Hotone |
Categorie: | Gitaarversterker |
Model: | Ampero Switch+ |
Heb je hulp nodig?
Als je hulp nodig hebt met Hotone Ampero Switch+ stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Gitaarversterker Hotone
4 Augustus 2025
Handleiding Gitaarversterker
- ART
- Roland
- Boss
- Fender
- Artec
- Peavey
- Aguilar
- DACS Audio
- NUX
- Vox
- EVH
- GR Bass
- Mooer
- Rockville
- TC Electronic
Nieuwste handleidingen voor Gitaarversterker
5 Augustus 2025
4 Augustus 2025
31 Juli 2025
29 Juli 2025
28 Juli 2025
18 Juli 2025
17 Juli 2025
17 Juli 2025
15 Juli 2025
7 Juli 2025