Behringer EQ700 Handleiding

Bekijk gratis de handleiding van Behringer EQ700 (23 pagina’s), behorend tot de categorie Mengpaneel. Deze gids werd als nuttig beoordeeld door 32 mensen en kreeg gemiddeld 4.6 sterren uit 5 reviews. Heb je een vraag over Behringer EQ700 of wil je andere gebruikers van dit product iets vragen? Stel een vraag

Thank you for showing your condence in us by purchasing the Behringer

GRAPHIC EQUALIZER EQ700. This high-quality stompbox is specically

designed to provide complete tone control and eliminate unwanted

feedback. It allows 7-band sound shaping and feedback elimination from

100 Hz to 6.4 kHz with a powerful 15 dB boost/cut per band.

1. Controls

(1) The 7-band EQ faders allow to boosting/cutting single

frequency ranges from

100 Hz to 6.4 kHz at ±15 dB.

(2) The LEVEL fader adjusts the output level. It can be used to

achieve eective volume “boost” or “cut.”

(3) This LED illuminates when the EQ is activated. It also serves as a

battery level indicator.

(4) Use the footswitch to activate/deactivate the EQ.

(5) Use this ¼" TS connector to plug in the instrument cable.IN

(6) The ¼" TS connector sends the signal to your amp.OUT

Use the connection at the front of the unit to plug in a 9 V power DC IN

supply (not included).

The BATTERY COMPARTMENT is located underneath the pedal cover.

To install or replace the 9 V battery, press the hinges with a ballpen and

remove the pedal cover. Be careful not to scratch the unit.

◊

◊

◊

◊ ◊ The EQ700 has no on/o switch. As soon as you insert the

jack into the in connector, the EQ700 begins running.

When not using the EQ700, remove the jack from the

in connector. This extends the life of the battery.

The is located at the bottom.SERIAL NUMBER

V 1.0

GRAPHIC EQUALIZER EQ700

Ultimate 7-Band Graphic Equalizer

(2)

(6)

(1) (3)

(5)

(4)

Product specificaties