BeamZ Multi Acis III 153.670 Handleiding

BeamZ Effect machine Multi Acis III 153.670

Lees hieronder de 📖 handleiding in het Nederlandse voor BeamZ Multi Acis III 153.670 (28 pagina's) in de categorie Effect machine. Deze handleiding was nuttig voor 29 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/28

Multi Acis III LED Laser Effect

Ref. nr.: 153.670

INSTRUCTION MANUAL

GEBRUIKSAANWIJZING

GEBRAUCHSANLEITUNG

MANUAL DE INSTRUCCIONES

NOTICE D’UTILISATION

V1.3

ENGLISH

Congratulations to the purchase of this Beamz light eﬀect. Please read this manual thoroughly prior to using the unit in order to

beneﬁt fully from all features.

Read the manual prior to using the unit. Follow the instructions in order not to invalidate the warranty. Take all precautions to

avoid ﬁre and/or electrical shock. Repairs must only be carried out by a qualiﬁed technician in order to avoid electrical shock.

Keep the manual for future reference.

- Prior to using the unit, please ask advice from a specialist.

When the unit is switched on for the ﬁrst time, some smell

may occur. This is normal and will disappear after a while.

- The unit contains voltage carrying parts. Therefore do NOT

open the housing.

- Do not place metal objects or pour liquids into the unit This

may cause electrical shock and malfunction.

- Do not place the unit near heat sources such as radiators,

etc. Do not place the unit on a vibrating surface. Do not

cover the ventilation holes.

- The unit is not suitable for continuous use.

- Be careful with the mains lead and do not damage it. A

faulty or damaged mains lead can cause electrical shock

and malfunction.

- When unplugging the unit from a mains outlet, always pull

the plug, never the lead.

- Do not plug or unplug the unit with wet hands.

- If the plug and/or the mains lead are damaged, they need

to be replaced by a qualiﬁed technician.

- If the unit is damaged to such an extent that internal parts

are visible, do NOT plug the unit into a mains outlet and

DO NOT switch the unit on. Contact your dealer. Do NOT

connect the unit to a rheostat or dimmer.

- To avoid ﬁre and shock hazard, do not expose the unit to

rain and moisture.

- All repairs should be carried out by a qualiﬁed technician

only.

- Connect the unit to an earthed mains outlet (220-

240Vac/50Hz) protected by a 10-16A fuse.

- During a thunderstorm or if the unit will not be used for a

longer period of time, unplug it from the mains. The rule is:

Unplug it from the mains when not in use.

- If the unit has not been used for a longer period of time,

condensation may occur. Let the unit reach room

temperature before you switch it on. Never use the unit in

humid rooms or outdoors.

- During operation, the housing becomes very hot. Do not

touch it during operation and immediately after.

- To prevent accidents in companies, you must follow the

applicable guide lines and follow the instructions.

- Secure the unit with an extra safety chain if the unit is

ceiling mount. Use a truss system with clamps. Make sure

nobody stands in the mounting area. Mount the eﬀect at

least 50cm away from inﬂammable material and leave at

least 1 meter space on every side to ensure suﬃcient

cooling.

- This unit contains high intensity LEDs. Do not look into the

LED light to prevent damage to your eyes.

- Do not repeatedly switch the ﬁxture on and oﬀ. This

shortens the life time.

- Keep the unit out of the reach of children. Do not leave the

unit unattended.

- Do not use cleaning sprays to clean switches. The residues

of these sprays cause deposits of dust and grease. In case

of malfunction, always seek advice from a specialist.

- Only operate the unit with clean hands.

- Do not force the controls.

- If the unit has fallen, always have it checked by a qualiﬁed

technician before you switch the unit on again.

- Do not use chemicals to clean the unit. They damage the

varnish. Only clean the unit with a dry cloth.

- ep away from electronic equipment that may cause Ke

interference.

- Only use original spares for repairs, otherwise serious

damage and/or dangerous radiation may occur.

- Switch the unit oﬀ prior to unplugging it from the mains

and/or other equipment. Unplug all leads and cables prior

to moving the unit.

- Make sure that the mains lead cannot be damaged when

people walk on it. Check the mains lead before every use

for damages and faults!

- The mains voltage is -240Vac/50Hz. Check if power 220

outlet match. If you trav , make sure that the mains el

voltage of the country is suitable for this unit.

- Keep the original packing material so that you can transport

the unit in safe conditions

This mark attracts the attention of the user to high voltages that are present inside the housing and that are of suﬃcient

magnitude to cause a shock hazard.

This mark attracts the attention of the user to important instructions that are contained in the manual and that he should read

and adhere to.

DO NOT LOOK DIRECTLY INTO THE LENS. This can damage your eyes. Persons who are subject to epileptic attacks

should be aware of the eﬀects that this light eﬀect may have on them.

The unit has been certiﬁed CE. It is prohibited to make any changes to the unit. They would invalidate the CE certiﬁcate and their

guarantee!

NOTE: To make sure that the unit will function normally, it must be used in rooms with a temperature between 5°C/ °F 41 and

35 95°C/ °F.

Electric products must not be put into household waste. Please bring them to a recycling centre. Ask your

local authorities or your dealer about the way to proceed.

Pls note! The use in France is only allowed to the professional user and not to the enduser. See decision:

www.legifrance.gouv.fr

LASERSAFETY

Caution

 Avoid direct eye contact with laser light. Never intentionally expose your eyes or others to direct laser light..

 This laser product can potentially cause instant eye injury or blindness if laser light directly strikes the eyes.

 It is illegal and dangerous to shine this laser into audience areas, where the audience or other personnel could

get direct laser beams or bright reﬂections into their eyes.

 It is an oﬀense to shine any laser at aircraft.

 There are no user serviceable parts inside the unit. Do not open the housing or attempt any repairs yourself. In

the unlikely event your unit may require service, please contact your dealer. .

 Use of controls or adjustments or performance of procedures other than those speciﬁed herein may result in

hazardous radiation exposure.

STOP AND READ ALL LASER SAFETY DATA

Laser Light is diﬀerent from any other light source with which you may be familiar. The light from this

product can potentially cause eye injury if not set up and used properly. Laser light is thousands of times

more concentrated than light from any other kind of light source. This concentration of light power can

cause instant eye injuries, primarily by burning the retina (the light sensitive portion at the back of the eye).

Even if you cannot feel “heat” from a laser beam, it can still potentially injure or blind you or your audience.

Even very small amounts of laser light are potentially hazardous even at long distances. Laser eye

injuries can happen quicker than you can blink.

It is incorrect to think that because these laser entertainment products split the laser into hundreds of beams or laser beam is

scanned out in high speed, that an individual laser beam is safe for eye exposure. This laser product uses dozens of mini Watts

of laser power (Class 3B levels internally). Many of the individual beams are potentially hazardous to the eyes.

It is also incorrect to assume that because the laser light is moving, it is safe. This is not true. Nor, do the laser beams always

move. Since eye injuries can occur instantly, it is critical to prevent the possibility of any direct eye exposure. In the laser safety

regulation, it is not legal to aim Class 3B lasers in areas which people can get exposed. This is true even if it is aimed below

people’s faces, such as on a dance floor.

• Do not operate laser without ﬁrst reading and understanding all safety and technical data in this manual

• Always set up and install all laser eﬀects so that all laser light is at least 3 meters (9.8 feet) above the ﬂoor on which

people can stand. See section later in this manual

• After set up, and prior to public use test laser to ensure proper function. Do not use if any defect is detected. Do not

use if laser emits only one or two laser beams rather than dozens/hundreds, as this could indicate damage to the

diﬀraction grating optic, and could allow emission of higher laser levels.

• Do not point lasers at people or animals.

• Never look into the laser aperture or laser beams

• Do not point lasers in areas in which people can potentially get exposed, such as uncontrolled balconies, etc.

• Do not point lasers at highly reﬂective surfaces such as windows, mirrors and shiny metal. Even laser reﬂections can

be hazardous.

• Never point a laser at aircraft, this is a federal oﬀense

• Never point un-terminated laser beams into the sky

• Do not expose the output optic (aperture) to cleaning chemicals

• Do not use laser if the laser appears to be emitting only one or two beams

• Do not use laser if housing is damaged or open, or if optics appear damaged in any way.

• Never open the laser housing. The high laser power levels inside of the protective housing can start ﬁres, burn skin and

will cause instant eye injury.

• Never leave this device running unattended.

• The operation of a class 3B laser is only allowed if the show is controlled by a skilled and well-trained operator familiar

with the data included in this manual.

• The legal requirements for using laser entertainment products vary from country to country. The user is responsible for

the legal requirements at the location/country of use.

• Always use appropriate lighting safety cables when hanging lights and effects overhead.

Further guidelines and safety programs for safe use of lasers can be found in the ANSI Z136.1 Standard “For Safe Use of

Potential laser injury hazard exists with this product! Read these instructions carefully,

which includes important information about installation, safe e and service! us

Product specificaties

Merk:	BeamZ
Categorie:	Effect machine
Model:	Multi Acis III 153.670
Kleur van het product:	Zwart
Gewicht:	4000 g
Breedte:	245 mm
Diepte:	245 mm
Hoogte:	300 mm
Aantal lampen:	13 lampen
Soort lamp:	LED
Vermogen lamp:	3 W
Stroombron:	AC
Ingangsspanning:	230 V
Kleur licht:	Amber, Blue, Green, Red, White
Frequentie:	50 Hz
XLR in:	Ja
XLR out:	1
Stroomverbruik (typisch):	60 W
Baldiameter:	- "
Aantal DMX-kanalen:	8 kanalen