BeamZ LS-RG11 152.876 Handleiding

BeamZ Effect machine LS-RG11 152.876

Lees hieronder de 📖 handleiding in het Nederlandse voor BeamZ LS-RG11 152.876 (24 pagina's) in de categorie Effect machine. Deze handleiding was nuttig voor 16 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/24

LS-RG11 laser Red Green Gobo DMX

Ref. nr.: 152.876

INSTRUCTION MANUAL

GEBRUIKSAANWIJZING

GEBRAUCHSANLEITUNG

MANUAL DE INSTRUCCIONES

MANUEL D'INSTRUCTIONS

V1.2

ENGLISH

Congratulations to the purchase of this Beamz light effect. Please read this manual thoroughly prior to using the unit in order to

benefit fully from all features.

Read the manual prior to using the unit. Follow the instructions in order not to invalidate the warranty. Take all precautions to

avoid fire and/or electrical shock. Repairs must only be carried out by a qualified technician in order to avoid electrical shock.

Keep the manual for future reference.

- Prior to using the unit, please ask advice from a

specialist. When the unit is switched on for the first time,

some smell may occur. This is normal and will disappear

after a while.

- The unit contains voltage carrying parts. Therefore do

NOT open the housing.

- Do not place metal objects or pour liquids into the unit

This may cause electrical shock and malfunction.

- Do not place the unit near heat sources such as

radiators, etc. Do not place the unit on a vibrating

surface. Do not cover the ventilation holes.

- The unit is not suitable for continuous use.

- Be careful with the mains lead and do not damage it. A

faulty or damaged mains lead can cause electrical shock

and malfunction.

- When unplugging the unit from a mains outlet, always

pull the plug, never the lead.

- Do not plug or unplug the unit with wet hands.

- If the plug and/or the mains lead are damaged, they

need to be replaced by a qualified technician.

- If the unit is damaged to such an extent that internal

parts are visible, do NOT plug the unit into a mains outlet

and DO NOT switch the unit on. Contact your dealer. Do

NOT connect the unit to a rheostat or dimmer.

- To avoid fire and shock hazard, do not expose the unit to

rain and moisture.

- All repairs should be carried out by a qualified technician

only.

- Connect the unit to an earthed mains outlet (220-

240Vac/50Hz) protected by a 10-16A fuse.

- During a thunderstorm or if the unit will not be used for a

longer period of time, unplug it from the mains. The rule

is: Unplug it from the mains when not in use.

- If the unit has not been used for a longer period of time,

condensation may occur. Let the unit reach room

temperature before you switch it on. Never use the unit in

humid rooms or outdoors.

- During operation, the housing becomes very hot. Do not

touch it during operation and immediately after.

- To prevent accidents in companies, you must follow the

applicable guide lines and follow the instructions.

- Secure the unit with an extra safety chain if the unit is

ceiling mount. Use a truss system with clamps. Make

sure nobody stands in the mounting area. Mount the

effect at least 50cm away from inflammable material and

leave at least 1 meter space on every side to ensure

sufficient cooling.

- This unit contains high intensity LEDs. Do not look into

the LED light to prevent damage to your eyes.

- Do not repeatedly switch the fixture on and off. This

shortens the life time.

- Keep the unit out of the reach of children. Do not leave

the unit unattended.

- Do not use cleaning sprays to clean switches. The

residues of these sprays cause deposits of dust and

grease. In case of malfunction, always seek advice from

a specialist.

- Only operate the unit with clean hands.

- Do not force the controls.

- If the unit has fallen, always have it checked by a

qualified technician before you switch the unit on again.

- Do not use chemicals to clean the unit. They damage the

varnish. Only clean the unit with a dry cloth.

- Keep away from electronic equipment that may cause

interference.

- Only use original spares for repairs, otherwise serious

damage and/or dangerous radiation may occur.

- Switch the unit off prior to unplugging it from the mains

and/or other equipment. Unplug all leads and cables

prior to moving the unit.

- Make sure that the mains lead cannot be damaged when

people walk on it. Check the mains lead before every use

for damages and faults!

- The mains voltage is 220-240Vac/50Hz. Check if power

outlet match. If you travel, make sure that the mains

voltage of the country is suitable for this unit.

- Keep the original packing material so that you can

transport the unit in safe conditions

This mark attracts the attention of the user to high voltages that are present inside the housing and that are of sufficient

magnitude to cause a shock hazard.

This mark attracts the attention of the user to important instructions that are contained in the manual and that he should

read and adhere to.

DO NOT LOOK DIRECTLY INTO THE LENS. This can damage your eyes. Persons who are subject to epileptic attacks

should be aware of the effects that this light effect may have on them.

The unit has been certified CE. It is prohibited to make any changes to the unit. They would invalidate the CE certificate and

their guarantee!

NOTE: To make sure that the unit will function normally, it must be used in rooms with a temperature between 5°C/41°F and

35°C/95°F. 

Electric products must not be put into household waste. Please bring them to a recycling centre. Ask your local authorities or your

dealer about the way to proceed. The specifications are typical. The actual values can slightly change from one unit to the other.

Specifications can be changed without prior notice.

LASERSAFETY

Caution

 Avoid direct eye contact with laser light. Never intentionally expose your eyes or others to direct laser light..

 This laser product can potentially cause instant eye injury or blindness if laser light directly strikes the eyes.

 It is illegal and dangerous to shine this laser into audience areas, where the audience or other personnel could

get direct laser beams or bright reflections into their eyes.

 It is an offense to shine any laser at aircraft.

 There are no user serviceable parts inside the unit. Do not open the housing or attempt any repairs yourself. In

the unlikely event your unit may require service, please contact your dealer..

 Use of controls or adjustments or performance of procedures other than those specified herein may result in

hazardous radiation exposure.

STOP AND READ ALL LASER SAFETY DATA

Laser Light is different from any other light source with which you may be familiar. The light from this product

can potentially cause eye injury if not set up and used properly. Laser light is thousands of times more

concentrated than light from any other kind of light source. This concentration of light power can cause instant

eye injuries, primarily by burning the retina (the light sensitive portion at the back of the eye). Even if you

cannot feel “heat” from a laser beam, it can still potentially injure or blind you or your audience. Even very

small amounts of laser light are potentially hazardous even at long distances. Laser eye injuries can happen

quicker than you can blink.

It is incorrect to think that because these laser entertainment products split the laser into hundreds of beams or laser beam is

scanned out in high speed, that an individual laser beam is safe for eye exposure. This laser product uses dozens of mini Watts

of laser power (Class 3B levels internally). Many of the individual beams are potentially hazardous to the eyes.

It is also incorrect to assume that because the laser light is moving, it is safe. This is not true. Nor, do the laser beams always

move. Since eye injuries can occur instantly, it is critical to r safety prevent the possibility of any direct eye exposure. In the lase

regulation, it is not legal to aim Class 3B lasers in areas which people can get exposed. This is true even if it is aimed below

people’s faces, such as on a dance floor.

 Do not operate laser without first reading and understanding all safety and technical data in this manual.

 Always set up and install all laser effects so that all laser light is at least 3 meters (9.8 feet) above the floor on which

people can stand. See section later in this manual.

 After set up, and prior to public use test laser to ensure proper function. Do not use if any defect is detected. Do not

use if laser emits only one or two laser beams rather than dozens/hundreds, as this could indicate damage to the

diffraction grating optic, and could allow emission of higher laser levels.

 Do not point lasers at people or animals.

 Never look into the laser aperture or laser beams.

 Do not point lasers in areas in which people can potentially get exposed, such as uncontrolled balconies, etc.

 Do not point lasers at highly reflective surfaces such as windows, mirrors and shiny metal. Even laser reflections can

be hazardous.

 Never point a laser at aircraft, this is a federal offense.

 Never point un-terminated laser beams into the sky.

 Do not expose the output optic (aperture) to cleaning chemicals.

 Do not use laser if the laser appears to be emitting only one or two beams.

 Do not use laser if housing is damaged or open, or if optics appear damaged in any way.

 Never open the laser housing. The high laser power levels inside of the protective housing can start fires, burn skin

and will cause instant eye injury.

 Never leave this device running unattended.

 The operation of a class 3B laser is only allowed if the show is controlled by a skilled and well-trained operator familiar

with the data included in this manual.

 The legal requirements for using laser entertainment products vary from country to country. The user is responsible for

the legal requirements at the location/country of use.

 Always use appropriate lighting safety cables when hanging lights and effects overhead.



Please note! The use in France is only allowed to the professional user and not to the end user. See decision:

www.legifrance.gouv.fr

Potential laser injury hazard exists with this product! Read these

instructions carefully, which includes important information about

installation, safe use and service!

Product specificaties

Merk:	BeamZ
Categorie:	Effect machine
Model:	LS-RG11 152.876
Kleur van het product:	Zwart
Gewicht:	1500 g
Breedte:	180 mm
Diepte:	200 mm
Hoogte:	75 mm
Stroombron:	AC
Ingangsspanning:	220 - 240 V
Kleur licht:	Green, Red
Frequentie:	50 Hz
XLR in:	Ja
XLR out:	1
Baldiameter:	- "
Aantal DMX-kanalen:	7 kanalen