BDI Fin 1106 Handleiding

BDI Tafel Fin 1106

Lees hieronder de 📖 handleiding in het Nederlandse voor BDI Fin 1106 (2 pagina's) in de categorie Tafel. Deze handleiding was nuttig voor 23 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/2

Fin is engineered for easy assembly. Carefully follow this procedure to

prevent any damage.

Placement and Maintenance

Fin is designed for indoor use on level floors. Clean glass with glass

cleaner, and steel parts and wood veneer with a moist cloth.

Step 1

Unpack and Identify

Unpack and identify the components at left. The assembly workspace

should be a non-marring surface such as carpet. For missing hardware

pieces, please contact BDI Customer Service at customerservice@

bdiusa.com. For all other concerns, please contact your BDI Retailer.

Step 2

Install legs

Wood direction/orientation is critical.

After locating the “BOTTOM SIDE” label on wood base, attach Legs (I) to

bottom side with Cap Screw (E) using the 4mm Hex Driver (A) and then

snap in . Glides (G) Install Glass Support Tube (H) to top edge of wood

part using the 4mm Hex Driver (A).

NOTE: The Glass Support Tubes have a small set screw just below the

open end.

Component List

These distinctive product configurations are protected by US and international

patents, trade dress, and/or copyright laws.

BDI is trademark of Becker Designed, Inc.

Made in China. 07012010v411061110REV

a s s e m b l y i n s t r u c t i o n s

bdiusa bdiusa.com customerservice@ .com

B - Phillips Screwdriver

x 1

D - Wood Base x 1

E - Cap Screw x 6

G - Glide x 3

F - Leg x 3

J - Glass Shelf x 1

M - Glass Top x 1

K - Set Screw x 3

Pre-installed

in Glass Support

Tubes (H)

Fin

1106 1110 and

A - 4mm Hex Driver

x 1

C - 2mm Hex Driver

with Ball End

x 1

I - Plastic Set Screw for

Glass Shelf

x 3

H - Glass Support Tube

x 3

Glass Support Tubes

have Set Screw (K)

just below open end.

assembly instructions

bdiusa bdiusa.com customerservice@ .com

Step 3

Install shelf.

Using the , install with Phillips Screwdriver (B) Glass Shelf (J) Plastic

Screws (I) to the pre-installed shelf supports as shown below.

Step 4

Install table top.

Using the and , install 2mm Hex Driver (C) Set Screw (K) Table Top (M)

as shown below.

C K

Product specificaties

Merk:	BDI
Categorie:	Tafel
Model:	Fin 1106
Breedte:	750 mm
Hoogte:	560 mm
In hoogte verstelbaar:	Nee
Frame kleur:	Zwart
Lengte:	640 mm
Frame materiaal:	Eiken
Aantal benen/poten:	3 poot/poten
Kleur tafelblad:	Transparant
Materiaal tafelblad:	Glas
Opbergplank:	Ja
Vervangbaar:	Nee
Designer:	Cristian Wicha
Opbergladen:	Nee
Soort tafelblad:	Dual
Hoogteklasse:	Laag