Baumr-AG PLTM11BMRA1C0 Handleiding
Baumr-AG
Zaagmachine
PLTM11BMRA1C0
Lees hieronder de 📖 handleiding in het Nederlandse voor Baumr-AG PLTM11BMRA1C0 (36 pagina's) in de categorie Zaagmachine. Deze handleiding was nuttig voor 28 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld
Pagina 1/36
Pole Tool Range
User manual
WARNING!
Read and follow all safety warnings and
instructions carefully before using this
machine. Failure to follow the warnings
and instructions may result in electric
shock, fire and/or serious injury. Save this
manual for future reference.
ATTENTION!
Products covered by this manual will vary
in appearance, assembly, inclusions,
description and packaging.
NOTE!
This manual also covers backpack style
machines with a flexible shaft as well as
options / accessories that may not be
suitable for the machine you have
purchased.
Index
Index ................................................................................................................................................................... 1
Safety Warnings ................................................................................................................................................. 2
Parts Diagram .................................................................................................................................................... 5
Assembly ............................................................................................................................................................ 6
Assembly cont... ................................................................................................................................................. 7
Assembly cont... ................................................................................................................................................. 8
Assembly cont... ................................................................................................................................................. 9
Assembly cont... ............................................................................................................................................... 10
Assembly cont... ............................................................................................................................................... 11
Before Use ....................................................................................................................................................... 12
Starting the engine ........................................................................................................................................... 13
Starting the engine cont… ............................................................................................................................... 14
How to Attach Blades and Accessories ........................................................................................................... 17
Hedge Trimmer ................................................................................................................................................ 18
Pruning Chainsaw ............................................................................................................................................ 19
Maintenance ..................................................................................................................................................... 22
Maintenance cont... .......................................................................................................................................... 23
Transporting/Storage ....................................................................................................................................... 24
Troubleshooting ...............................................................................................................................................25
Troubleshooting cont... .................................................................................................................................... 26
Specifications ................................................................................................................................................... 27
250816124100
2
2
Safety Warnings
It is important you read and
understand the instruction
manual before first use and
keep the manual in a safe
place for future reference.
Safety precautions must be
observed to reduce the risk of
personal injury when
operating this machine.
DANGER! Keep clear of power
lines, contact can cause death.
Like all power equipment this unit must
be handled carefully.
Do not expose yourself or others to danger.
Do not permit others to use this machine
unless they have read this manual and are
trained in its operation. Do not operate if
the equipment is damaged or in an
excessively worn state. To reduce fire
hazards keep the engine and silencer free
of debris leaves or excessive lubricant., Do
not use any attachments or accessories
with the equipment other than the ones
recommended by the supplier. Serious
injury to the operator or bystanders can
result as well as cause damage to the
machine. Always use proper handles and /
or shoulder strap when using the
equipment. Do not use the unit if it is
damaged or poorly adjusted. Never
remove the machine’s guards. Serious
injury to the operator or bystanders could
result as well as damage to the machine.
Never leave the machine running and
unattended. Do not use this unit for any job
other than those for which it is intended as
described in this manual. During or after
operation of the engine, never touch hot
parts such as the muffler, the high voltage
wire or the spark plug. Do not operate the
machine in the rain or under wet
conditions. Always ensure all handles and
guards are fitted when using the machine.
Always keep the machine away from naked
flame or sparks. Always stop the engine
before cleaning / clearing a blockage or
checking, maintenance or working on the
machine.
W orking at heights
Always use a scissor lift, never work on a
ladder or in a tree, never work on an
insecure support and never operate your
unit with one hand. Always be sure of a
safe and secure operating position
especially when working at heights.
Clothing and Equipment
Dress properly. Do not wear loose clothing
or jewellery which can be caught in moving
parts. Use of sturdy gloves, non-skid
footwear, and safety glasses is
recommended;
Always wear ear protection. Loud
noises for an extended period of
time may damage your hearing.
Total face and head protection
must be worn to reduce injury
from falling branches.
Wear no slip heavy duty work -
gloves to improve your grip on
the brush cutter handle. Gloves
also reduce the transmission of
machine vibration to your hands.
The dust, vapour and smoke
produced during operation may
be dangerous to health. If the
work area is very dusty or
smoky, wear a respirator.
Transporting the Machine
The engine should be turned off when the
machine is moved between areas and
when transporting or storing the machine.
Always turn off the engine. Always fit the
blade covers before carrying your tool.
When transporting in a vehicle: properly
secure your machine to prevent turnover,
fuel spillage and damage.
Fuelling
Petrol is an extremely
flammable fuel. Keep clear of
naked flames.
Do not spill any fuel o not smoke near . D
fuel or the machine. Always shut off the
engine before refuelling. Do not fuel a hot
engine – fuel may spill and cause a fire.
Open the fuel cap carefully to allow any
pressure build up in the tank to release -
slowly and avoid fuel spillage. Fuel your
machine only in well ventilated areas. If you
spill fuel, wipe the machine immediately –
if fuel gets on your clothing, change
immediately. To reduce the risk of serious
or fatal burn injuries, check for fuel
leakage. If fuel leakage is found, do not
start or run the engine until leak is fixed.
During Operation
Make sure you always have good balance
and secure footing. Always be aware of
your surroundings and stay alert for
possible hazards that you may not hear
due to the noise of the machine. Never
allow children to access the machine.
Avoid operating while people, especially
children are nearby. To reduce the risk of
injury, do not allow any other persons
within a radius of 25 meters of your own
position. To reduce the risk of damage to
property, also maintain this distance from
other objects (vehicles, windows).
After Finishing Work
Always clean dust and dirt off the machine
– do not use any grease solvents. Always
keep the machine clean, especially, the
fuel tank, its surroundings, and the air
cleaner. After the engine has stopped, the
muffler will still be hot. Never place the
machine in any places where there are
flammable materials such as dry grass,
combustible gases or combustible liquids
etc. Replace cutting tool covers.
Maintenance and Repairs
Service the machine regularly. Do not
attempt any maintenance or repair work
not described in the instruction manual.
Have all other work performed by a
servicing dealer. We recommend that you
have servicing and repair work carried out
exclusively by an authorised service
person. Before proceeding to adjust or
repair the machine, be sure to stop the
engine and detach the spark plug . lead
Never attempt to make engine adjustments
while the unit is strapped to the operator.
Always make engine adjustments with the
unit resting on a flat, clear surface.
Product specificaties
| Merk: | Baumr-AG |
| Categorie: | Zaagmachine |
| Model: | PLTM11BMRA1C0 |
Heb je hulp nodig?
Als je hulp nodig hebt met Baumr-AG PLTM11BMRA1C0 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Zaagmachine Baumr-AG
8 April 2024
7 December 2023
7 December 2023
27 Mei 2023
26 April 2023
1 April 2023
28 Maart 2023
20 Maart 2023
20 Januari 2023
14 Oktober 2022
Handleiding Zaagmachine
- Zaagmachine Bosch
- Zaagmachine AEG
- Zaagmachine DeWalt
- Zaagmachine Ford
- Zaagmachine Al-ko
- Zaagmachine Atika
- Zaagmachine BabyGO
- Zaagmachine Batavia
- Zaagmachine Bavaria
- Zaagmachine Bebe Confort
- Zaagmachine BGU
- Zaagmachine Blucave
- Zaagmachine Bort
- Zaagmachine Brennenstuhl
- Zaagmachine Bruder Mannesmann
- Zaagmachine Budget
- Zaagmachine Defort
- Zaagmachine Dolmar
- Zaagmachine Dremel
- Zaagmachine Duro
- Zaagmachine Echo
- Zaagmachine Einhell
- Zaagmachine Elektra Beckum
- Zaagmachine Elu
- Zaagmachine Ergofix
- Zaagmachine Exakt
- Zaagmachine Fein
- Zaagmachine Felisatti
- Zaagmachine Ferm
- Zaagmachine Ferrex
- Zaagmachine Festool
- Zaagmachine Flex
- Zaagmachine Florabest
- Zaagmachine FOM
- Zaagmachine Fuxtec
- Zaagmachine Gamma
- Zaagmachine Gardena
- Zaagmachine Gardenline
- Zaagmachine Germania
- Zaagmachine Global
- Zaagmachine Greenworks
- Zaagmachine Grizzly
- Zaagmachine Gude
- Zaagmachine Gude Pro
- Zaagmachine Hammer
- Zaagmachine Hikoki
- Zaagmachine Hitachi
- Zaagmachine Holzmann
- Zaagmachine Homelite
- Zaagmachine Husqvarna
- Zaagmachine Huvema
- Zaagmachine Hyundai
- Zaagmachine Ideal
- Zaagmachine Kompernass
- Zaagmachine Kress
- Zaagmachine Lux Tools
- Zaagmachine Luxor
- Zaagmachine Maestro
- Zaagmachine Makita
- Zaagmachine Maktec
- Zaagmachine Matrix
- Zaagmachine Max
- Zaagmachine Maxx
- Zaagmachine McCulloch
- Zaagmachine Metabo
- Zaagmachine Milwaukee
- Zaagmachine Parkside
- Zaagmachine Pattfield
- Zaagmachine Plantiflor
- Zaagmachine Powerfix
- Zaagmachine Powerplus
- Zaagmachine Remington
- Zaagmachine Robust
- Zaagmachine Ryobi
- Zaagmachine Scheppach
- Zaagmachine Shindaiwa
- Zaagmachine Silverline
- Zaagmachine Skil
- Zaagmachine Stanley
- Zaagmachine Sterwins
- Zaagmachine Stiga
- Zaagmachine Stihl
- Zaagmachine Tanaka
- Zaagmachine Texas
- Zaagmachine Toledo
- Zaagmachine Toolcraft
- Zaagmachine Topcraft
- Zaagmachine Trotec
- Zaagmachine Troy-Bilt
- Zaagmachine Varo
- Zaagmachine Vonroc
- Zaagmachine Westfalia
- Zaagmachine Workzone
- Zaagmachine Worx
- Zaagmachine Zipper
- Zaagmachine Ozito
- Zaagmachine Black And Decker
- Zaagmachine Cocraft
- Zaagmachine Draper
- Zaagmachine Meec Tools
- Zaagmachine Lionelo
- Zaagmachine Clarke
- Zaagmachine Genesis
- Zaagmachine Hilti
- Zaagmachine Cobra
- Zaagmachine Hobart
- Zaagmachine ACG
- Zaagmachine Cotech
- Zaagmachine Power Craft
- Zaagmachine Tacklife
- Zaagmachine Truper
- Zaagmachine Fieldmann
- Zaagmachine Mafell
- Zaagmachine Proxxon
- Zaagmachine Biltema
- Zaagmachine Porter-Cable
- Zaagmachine Sun Joe
- Zaagmachine Yard Force
- Zaagmachine Challenge
- Zaagmachine EGO
- Zaagmachine Hurricane
- Zaagmachine Sovereign
- Zaagmachine Spear & Jackson
- Zaagmachine Dedra
- Zaagmachine Graphite
- Zaagmachine Narex
- Zaagmachine RIDGID
- Zaagmachine Tryton
- Zaagmachine Herkules
- Zaagmachine Powerworks
- Zaagmachine Sthor
- Zaagmachine Craftsman
- Zaagmachine Rikon
- Zaagmachine Verto
- Zaagmachine Erbauer
- Zaagmachine Snow Joe
- Zaagmachine Chicago Pneumatic
- Zaagmachine Alpha Tools
- Zaagmachine Hazet
- Zaagmachine Yato
- Zaagmachine Jonsered
- Zaagmachine Qualcast
- Zaagmachine Avantco
- Zaagmachine Masport
- Zaagmachine Morrison
- Zaagmachine Martha Stewart
- Zaagmachine IKRA
- Zaagmachine MTM
- Zaagmachine Meister Craft
- Zaagmachine Łucznik
- Zaagmachine King Craft
- Zaagmachine Toolson
- Zaagmachine Wolfcraft
- Zaagmachine Kreg
- Zaagmachine Vulcan
- Zaagmachine Challenge Xtreme
- Zaagmachine Pro-Cut
- Zaagmachine Power Smart
- Zaagmachine Backyard Pro Butcher Series
- Zaagmachine EFA
- Zaagmachine Einhell Bavaria
- Zaagmachine McKenzie
- Zaagmachine Proviel
- Zaagmachine Ultranatura
- Zaagmachine FIXIT
- Zaagmachine Ergotools Pattfield
- Zaagmachine MyTool
- Zaagmachine Bavaria By Einhell
- Zaagmachine Donau Elektronik
- Zaagmachine Rona
Nieuwste handleidingen voor Zaagmachine
26 April 2024
15 April 2024
10 April 2024
10 April 2024
10 April 2024
10 April 2024
10 April 2024
10 April 2024
10 April 2024
9 April 2024