Baumr-AG Hercules HPS2000E Handleiding

Baumr-AG Houtkliever Hercules HPS2000E

Lees hieronder de 📖 handleiding in het Nederlandse voor Baumr-AG Hercules HPS2000E (19 pagina's) in de categorie Houtkliever. Deze handleiding was nuttig voor 71 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/19
Electric Log Splitter - HPS2000E
E&OE © -AG 9 2022 Baumr
No. No. No. Name Name Name
1
Log pusher
6
Log-retaining plates
11
Hydraulic control lever
2 7 Worktable Switch 12 Control lever guard
3 8 Wedge Motor 13 Bleed screw
4
Lift handle
9
Push button control box
14
Oil drain bolt w/ dipstick
5
Support leg
10
Wheels (for minor moving only)
15
Max. pressure limiting screw
Parts Drawing and Parts List
NO. NAME NO. NAME
1 Lever Mount Nut 53 Flat Washer
2 Nut Cap 54 Screw
3 Lever 55 Wheel cover
4 Lever Knob 56 R clip
5 Guard Plate 57 Wheel
6 Nut 58 Washer
7 Copper Gasket Wheel shelf 59
8 Screw Bolt 60
9 O- ring 61 Spring Washer
Electric Log Splitter - HPS2000E
E&OE © -AG 2022 Baumr 10
NO. NAME NO. NAME
10 Snap Washer 62 Washer
11 Valve Retract Spring 63 Gear Pump Cover
12 64 O- ring O- ring
13 Valve Core Rod 65 Gear Housing Plate
14 Sliding Pressure Sensor Sleeve 66 Circlip
15 Sliding Pressure Sensor Sleeve Spring 67 Gear Shaft
16 Cover Aluminium (Rear) 68 Steel Ball
17 69 Gear O- ring
18 Piston Pin 70
19 71 Washer Piston Ring
20 72 O- ring Bolt
21 73 Spring Motor Cover
22 74 Stud Seal
23 75 Nut Hydraulic Cylinder
24 Cover (Front) Screw Aluminium 76
25 77 Piston Rod Seal Motor
26 78 O- ring cooler
27 79 Wing Bolt Block turn
28 80 washer groupware cool cover
29 Dipstick 81 Spring Washer
30 82 Piston Rod Cross headed Screw
31 83 Lift Handle Leg groupware
32 Screw 84 Nut
33 Frame Tube 85 Bolt
34 Lead plank 86 Pin
35 Spring Washer 87 Nut
36 Screw 88 prevent out
37 89 Nut Abnormity Bolt
38 90 Flat Washer Screw
39 91 Nut Switch Box cover
40 Nut Plug 92 Airproof underlay
41 93 washer groupware Connection Terminal
42 Valve Sleeve 94 Capacitor
43 95 O- ring Switch
44 Adjusting Screw 96 Switch Box
Electric Log Splitter - HPS2000E
E&OE © -AG 2022 Baumr 11
NO. NAME NO. NAME
45 97 Steel Ball Waterproof underlay
46 Pressure Limited Valve Spring 98 Motor Support Left Shoe
47 Adjusting Screw Motor 99 Support Right Shoe
48 Pin Log Pusher Connection Weldment 100
49 Plastic Insert 1 O- 101 ring
50 Plastic Insert 2 102 Sliding Sleeve
51 Log Pusher 103 Bolt
52 Nut 105 Flat washer
Assembly
Contents supplied:
•
•
•
•• Frame assembly
•
•
•
•• R clip x 2
•
•
•
•• Wheel x 2
•
•
•
•• Flat washer x 2
•
•
•
•• Wheel cover x 2
Wheel Assembly
1. Slide the wheel followed with a flat washer onto the wheel
axle, then install the R clip. Using pliers, bend the ends of the
R clip to secure the wheel in place. Insert wheel cover by
pressing into wheel until it is secured.
2. Repeat for the second wheel.
Log Splitter Assembly
1. - Bolt the Support Leg to the Log Splitter, lift the log splitter by the handles at both ends and place it on a 60
75cm high, stable, flat and level work surface.
2. Familiarise yourself with the controls and features of this log splitter in the Parts Identification section.


Product specificaties

Merk: Baumr-AG
Categorie: Houtkliever
Model: Hercules HPS2000E

Heb je hulp nodig?

Als je hulp nodig hebt met Baumr-AG Hercules HPS2000E stel dan hieronder een vraag en andere gebruikers zullen je antwoorden