Bauknecht GSIP 6517/1 SW Handleiding

Bekijk gratis de handleiding van Bauknecht GSIP 6517/1 SW (8 pagina’s), behorend tot de categorie Vaatwasser. Deze gids werd als nuttig beoordeeld door 78 mensen. Heb je een vraag over Bauknecht GSIP 6517/1 SW of wil je andere gebruikers van dit product iets vragen? Stel een vraag

5019 496 01066

1

GB GSIP 6517

Before using the dishwasher, read the

installation and maintenance instructions carefully!

1)Programme data obtained in conformity with European standard EN 50242. The data may vary, for example, according to

different loads, extra functions, sensor settings (only with sensor programmes), water supply temperatures, water hardness

and power supply voltage.

2)Energy label programme in compliance with EN 50242. - Information for Test Laboratories: for more detailed information on

the EN comparison test and other tests, contact the following address: “nk_customer@whirlpool.com”.

3)The antibacterial action has been shown in collaboration with the Pasteur Institute, Lille (France), in conformity with.

Standard NF EN 13697 - November 2001.

1. OVERVIEW

Programme selector

START button

The indicator lights up during operation, flashes when a fault

occurs, and goes off at the end of the programme.

START button RESET function:

Press this button for at least 2 seconds; the selected programme and

options are cancelled. Main failure displays (repeated flashing of the

START indicator lamp) can be cancelled by RESETTING. Detailed

instructions are given in chapter 5 “What to do, in case of...”.

Fault indication and wash time display

In normal operation it indicates the remaining time (h:mm),

whereas with “Delayed start” selected it indicates the time

remaining until programme start (hh).

If “F..” appears on the display, see chapter 5 “What to do, in case of...”.

“Delayed start” button

Press the button (repeatedly) to delay the start of the programme.

Adjustable from 1 to 24 hours. With each press of the button, the

delayed start indicator increases by one hour and after 24 restarts

from 00. Then press the START button. The dishwasher will start

after the set time.

Half Load/Multizone button

The half load cycle can be used for the upper or lower rack. Select the

required programme then press the “Half load” button. The light

comes on and goes off at the end of the programme.

This function can be used with the programmes indicated in table 1.1.

Antibacterial rinse 3)

This function activates an antibacterial rinse at the end of the wash

cycle, guaranteeing a further reduction of bacteria. Press the button to

activate or deactivate the function. This function can be used with those

programmes marked with the relative symbol in table 1.1.

The dishwasher door must be kept shut for the entire duration of

the programme in order to guarantee reduction of bacteria. If the

door is opened the indicator lamp starts flashing.

On / Off button

Table 1.1.

Table of programmesDetergent

dispenser Consumption 1)

PProgrammes Available

options Loading instructionslargesmallLitreskWhMinutes

1Pre-rinse cold—Crockery to be washed later.——4.00.0314 ±1)

2Rapid40°C —Lightly soiled crockery, without dry

residuals. X—10.00.6530 ±1)

3Bio 2) 50°C Normally soiled crockery. Energy-saving

programme. XX12.01.05165 ±1)

4Daily 60°CNormally to heavily soiled crockery.XX13.01.25120 ±1)

5Intensive 70°CRecommended programme for heavily

soiled crockery, especially suitable for

pans and saucepans.XX14.01.55155 ±1)

Foutcodes Bauknecht GSIP 6517/1 SW

Foutcodes uit de officiële handleiding, met betekenis en oplossing.

Alle foutcodes Bauknecht Vaatwasser

Product specificaties