Axxess AXGMLN-10 Handleiding
Pagina's 4 Niet gecategoriseerd
Bekijk de handleiding van Axxess AXGMLN-10 gratis online of download de PDF. 3 mensen vonden deze handleiding nuttig. Vraag over dit model? Stel een vraag
AXGMLN-10
INSTALLATION INSTRUCTIONS
AxxessInterfaces.com © COPYRIGHT 2025 METRA ELECTRONICS CORPORATION REV. 3/31/25 INSTAXGMLN-10
INTERFACE COMPONENTS
OPTIONAL ACCESSORIES (sold separately)
TOOLS REQUIRED
• Crimping tool and connectors, or solder gun,
solder, and heat shrink • Tape • Wire cutter
• Zip ties • Small flat-blade screwdriver
TABLE OF CONTENTS
Connections ............................................................2
Installation .............................................................3
Programming .........................................................3
Adjustments ...........................................................3
Troubleshooting.....................................................3
LD-BACKUPCAM4T Notes .......................................4
Data Interface
Fits Select GM Models* 2016-2021
*2018-Up Trucks w/IOB refer to LD-BACKUPCAM4T page 4
APPLICATIONS
• AXGMLN-10 interface
• AXGMLN-10 harness
• 16-pin harness with stripped leads
• LD-BACKUPCAM4T
Extension Harness: AXEXH-GM10
Steering Wheel Control Interface: AXSWC
The IOA/IOB code, if applicable, can be found in the Service Parts Identification label located in: Glovebox: Canyon/Colorado/Cruze/Equinox/Silverado/Sierra – Rear Compartment Floor: Malibu
INTERFACE FEATURES
• Designed for non-amplified systems or bypassing a factory amplifier
• Provides accessory power (12-volt 10-amp)
• Retains R.A.P. (Retained Accessory Power)
•
Provides NAV outputs (parking brake, reverse, mute, and speed sense)
• Prewired AXSWC harness included (AXSWC sold separately)
•
Retains warning chimes and balance and fade with adjustable gain control
• Retains OnStar
®
/OE Bluetooth
®
connectivity
• Adjustable gain control for chimes and OnStar
®
• Retains the factory backup camera
• Can be used with extension AXEXH-GM10
• Micro “B” USB updatable
Visit AxxessInterfaces.com for more detailed information about the product and up-to-date vehicle
specific applications 2018-Up Trucks w/IOB refer to page 4
ATTENTION: With the key out of the ignition,
disconnect the negative battery terminal
before installing this product. Ensure that all
installation connections, especially the air
bag indicator lights, are plugged in before
reconnecting the battery or cycling the ignition
to test this product.
NOTE: Refer also to the instructions included
with the aftermarket accessory before
installing this device.
CHEVROLET
Colorado (RPO IOB) ..........................2017-2021
Cruze (RPO IOA) ...............................2016-2018
Equinox (RPO IOB) ....................................2018
Malibu (RPO IOA) .............................2016-2018
Silverado LD (RPO IOB) .............................2019
Silverado (RPO IOB) .........................2016-2018
Silverado 2500 / 3500 HD (RPO IOB
)
...2016-2019
Trax (RPO IOA) ................................2017-2020
GMC
Acadia (RPO IOB) .............................2017-2019
Canyon (IOB) ....................................2017-2018
Sierra (RPO IOB) ...............................2016-2018
Sierra Limited (RPO IOB) ..........................2019
Sierra 2500 / 2500 HD (RPO IOB) ....2016-2019
Product specificaties
| Merk: | Axxess |
| Categorie: | Niet gecategoriseerd |
| Model: | AXGMLN-10 |
Heb je hulp nodig?
Als je hulp nodig hebt met Axxess AXGMLN-10 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Niet gecategoriseerd Axxess
Axxess AXCSD-6V Handleiding Axxess AXBUCH-SB2 Handleiding Axxess AXDIS-GMLN31 Handleiding Axxess AXGMLN-34 Handleiding Axxess AXTC-CH5 Handleiding Axxess LOC-TYH2 Handleiding Axxess AXDSPX-FD3 Handleiding Axxess AXDSPX-TES1 Handleiding