Axxess AXDIS-TY1 Handleiding

Bekijk gratis de handleiding van Axxess AXDIS-TY1 (24 pagina’s), behorend tot de categorie Niet gecategoriseerd. Deze gids werd als nuttig beoordeeld door 35 mensen en kreeg gemiddeld 4.9 sterren uit 7 reviews. Heb je een vraag over Axxess AXDIS-TY1 of wil je andere gebruikers van dit product iets vragen? Stel een vraag

AXDIS-TY1

INSTALLATION INSTRUCTIONS

AxxessInterfaces.com © COPYRIGHT 2024 METRA ELECTRONICS CORPORATION REV. 11/22/24 INSTAXDIS-TY1

INTERFACE FEATURES

INTERFACE COMPONENTS

• Wire cutter

• Crimp tool

• Solder gun

• Tape

• Small flat-blade screwdriver

• Connectors (example: butt-

connectors, bell caps, etc.)

TABLE OF CONTENTS

Applications ...........................................................2

Connections:

Non-Amplified Models:

LD-TYNOAMP .................3

Amplified Models: LD-BX-TY2

.............................4

3.5mm Jack Steering Wheel Control Retention

....5

Installing the AXDIS-TY1 ........................................5

Programming the AXDIS-TY1 ................................6

Audio Level Adjustment .......................................6

Steering Wheel Control Settings .....................7-10

LED Feedback .......................................................7

Changing Radio Type ..........................................8

Remapping the SWC Buttons .........................8-9

Dual Assignment Instructions

...........................10

Troubleshooting....................................................11

Fits Lexus/Toyota Interface with SWC 2001-2015

• AXDIS-TY1 interface

• AXDIS-TY1 harnesses (LD-TYNOAMP, LD-BX-TY2 AND LD-2NAVAMP)

• Female 3.5mm connector with stripped leads

Visit AxxessInterfaces.com for more detailed information

about the product and up-to-date vehicle specific applications.

• Designed for both amplified and non-amplified models

• Provides accessory power (12-volt 10-amp)

• Retains audio controls on the steering wheel

• Provides NAV outputs (parking brake, reverse)

• Retains the factory AUX-IN jack

• Retains balance on amplified models

(non-amplifed models will retain balance and fade)

• Micro-B USB updatable

APPLICATIONS (See Page 2)

TOOLS REQUIRED

ATTENTION: With the key out of the

ignition, disconnect the negative battery

terminal before installing this product. Ensure

that all installation connections, especially the

air bag indicator lights, are plugged in before

reconnecting the battery or cycling the ignition

to test this product.

NOTE: Refer also to the instructions included

with the aftermarket radio.

MetraOnline.com may be used

to assist with dash assembly

instructions. Simply enter your

Year, Make, Model vehicle into

the vehicle fit guide and look

for the Dash Kit Installation

Instructions.

Product Info

www.MetraOnline.com

Product specificaties