Axxess AXAC-MZ1 Handleiding

Bekijk gratis de handleiding van Axxess AXAC-MZ1 (16 pagina’s), behorend tot de categorie Niet gecategoriseerd. Deze gids werd als nuttig beoordeeld door 26 mensen en kreeg gemiddeld 4.0 sterren uit 6 reviews. Heb je een vraag over Axxess AXAC-MZ1 of wil je andere gebruikers van dit product iets vragen? Stel een vraag

AXAC-MZ1

INSTALLATION INSTRUCTIONS

AxxessInterfaces.com © COPYRIGHT 2025 METRA ELECTRONICS CORPORATION REV. 7/14/25 INSTAXAC-MZ1

ATTENTION: With the key out of the

ignition, disconnect the negative battery

terminal before installing this product.

Ensure that all installation connections,

especially the air bag indicator lights, are

plugged in before reconnecting the battery

or cycling the ignition to test this product.

NOTE: Refer also to the instructions

included with the aftermarket accessory

before installing this device.

INTERFACE FEATURES

TOOLS REQUIRED

INTERFACE COMPONENTS

REQUIRED ITEMS

TABLE OF CONTENTS

Introduction ...........................................................2

Configuration .....................................................2-4

Connections ............................................................5

Installation .............................................................6

Programming .........................................................6

• Add multiple CAN-activated cameras with 4 camera inputs

• Includes AXAC camera interface and vehicle-specific harness

• Programmable 12-volt 5-amp switched output (configured through

the Axxess Updater program)

• Reverse signal trigger generated via CAN bus communication of

the vehicle

•

Turn signal trigger generated via CAN bus communication of

the vehicle

• 4 programmable camera control wires (configured through the

Axxess Updater program)

•

Can also be manually controlled and used along with an

aftermarket radio

Retains backup camera

• VSS (Vehicle Speed Sense) input and output

• Micro “B” USB updatable

• Crimping tool and connectors, or solder gun,

solder, and heat shrink

• Tape • Wire cutter • Zip ties

• AXAC-MZ1 interface

• AXAC-MZ1 interface harness

• AXAC-MZ1 vehicle harness (qty. 2)

• 24-pin T-harness

• 4-pin T-harness (cam harness)

Update Cable: AXUSB-MCBL (sold separately)

Axxess Updater Program

Camera Data Interface with Pre-Wired Harness

Fits Select Mazda Models2013-2020

APPLICATIONS

Mazda

CX-5 ............................................................2013-2015

CX-9 ...........................................................2016-2020

Visit AxxessInterfaces.com for more detailed information

about the product and up-to-date vehicle specific applications

Product specificaties