Axxess AXAC-GM2 Handleiding

Bekijk gratis de handleiding van Axxess AXAC-GM2 (8 pagina’s), behorend tot de categorie Niet gecategoriseerd. Deze gids werd als nuttig beoordeeld door 3 mensen en kreeg gemiddeld 4.1 sterren uit 8 reviews. Heb je een vraag over Axxess AXAC-GM2 of wil je andere gebruikers van dit product iets vragen? Stel een vraag

AXAC-GM2

INSTALLATION INSTRUCTIONS

AxxessInterfaces.com © COPYRIGHT 2025 METRA ELECTRONICS CORPORATION REV. 7/10/25 INSTAXAC-GM2

ATTENTION: With the key out of the ignition,

disconnect the negative battery terminal before

installing this product. Ensure that all installation

connections, especially the air bag indicator lights,

are plugged in before reconnecting the battery or

cycling the ignition to test this product.

NOTE: Refer also to the instructions included

with the aftermarket accessory before installing

this device.

REQUIRED ITEMS

Update Cable: AXUSB-MCBL (sold separately)

AXXESS Updater Program

TABLE OF CONTENTS

Connections ........................................................2-3

AXAC-GM2 Layout .............................................4

Add Cam Configuration

from AXXESS Updater ...................................5-6

INTERFACE FEATURES

• Add multiple CAN-activated cameras with 4 camera inputs

• Includes AXAC camera interface and vehicle-specific harness

• Programmable 12-volt 5-amp switched output (configured through the

Axxess Updater program)

•

Reverse signal trigger generated via CAN Bus communication of the vehicle

• Turn signal trigger generated via CAN Bus communication of the vehicle

• 4 programmable camera control wires (configured through the Axxess

Updater program)

•

Can also be manually controlled and used along with an aftermarket radio

• Rear Video Assistant (RVA) option can be used to keep a camera active

• VSS (Vehicle Speed Sense) input and output

• Micro “B” USB updatable

*

Intended for 7" inch screens, the GM LVDS2 interface will allow your

factory screen to enable a Camera or add multiple cameras to your

factory screen. It can also be used as a “Baby Monitor”

or “Monitor

for your Trailer Hitch”

Camera Data Interface w/Pre-Wired Harness Fits

Select Buick/Chevrolet/GMC Models*

2014-2020

Buick

with IOB 7” MyLink Touchscreen

Enclave ............................2018-2019

LaCrosse ...........................2014-2019

Regal ................................2014-2017

Chevrolet

with IOB 7” MyLink Touchscreen

Colorado ..........................2015-2018

Impala ..............................2014-2018

Silverado ........................2014-2019

Silverado 2500 / 3500 .............2019

Suburban .........................2015-2020

Tahoe ...............................2015-2020

GMC w\IOB 7” MyLink Touchscreen

Acadia ..............................2017-2019

Canyon .............................2015-2018

Sierra ................................2014-2018

Sierra Limited ...........................2019

Yukon / XL .......................2015-2020

Visit AxxessInterfaces.com for more detailed information

about the product and up-to-date vehicle specific applications.

APPLICATIONS LD-GMLVDS2 7” (IOB

)

Product specificaties