Axxess AXAC-FD1 Handleiding

Bekijk gratis de handleiding van Axxess AXAC-FD1 (8 pagina’s), behorend tot de categorie Niet gecategoriseerd. Deze gids werd als nuttig beoordeeld door 14 mensen en kreeg gemiddeld 4.9 sterren uit 4 reviews. Heb je een vraag over Axxess AXAC-FD1 of wil je andere gebruikers van dit product iets vragen? Stel een vraag

AXAC-FD1

INSTALLATION INSTRUCTIONS

AxxessInterfaces.com © COPYRIGHT 2025 METRA ELECTRONICS CORPORATION REV. 9/12/25 INSTAXAC-FD1

INTERFACE FEATURES

TOOLS REQUIRED

INTERFACE COMPONENTS

REQUIRED ITEMS

TABLE OF CONTENTS

Introduction ...........................................................2

Applications ...........................................................2

Configuration .....................................................2-5

Connections ............................................................6

Installation .............................................................7

Programming .........................................................7

• Add multiple CAN-activated cameras with 4 camera inputs

• Includes AXAC camera interface and vehicle-specific harness

• Programmable 12-volt 5-amp switched output (configured through the

Axxess Updater program)

•

Reverse signal trigger generated via CAN bus communication of the vehicle

• Turn signal trigger generated via CAN bus communication of the vehicle

• 4 programmable camera control wires (configured through the Axxess

Updater program)

•

Can also be manually controlled and used along with an aftermarket radio

• VSS (Vehicle Speed Sense) input and output

• Micro “B” USB updatable

• Crimping tool and connectors, or solder gun,

solder, and heat shrink

• Tape • Wire cutter • Zip ties

• AXAC-FD1 interface

• AXAC-FD1 interface harness

• AXAC-FD1 vehicle harness (qty. 2)

• 12-pin T-harness

• 54-pin T-harness

Update Cable: AXUSB-MCBL (sold separately)

Supplemental Harness*:

AX-ADDCAM-FDSTK (sold separately)

Axxess Updater Program

*2014-Up models with 4.2-inch display screen only

Visit AxxessInterfaces.com for more detailed information

about the product and up-to-date vehicle specific applications

Camera Data Interface w/Pre-Wired Harness

Fits Select Ford Models 2011-2023*

*With either a 4.2-inch, 6.5-inch, or 8-inch display screen

Note: Only compatible with NTSC cameras.

APPLICATIONS (see next page)

ATTENTION: With the key out of the ignition,

disconnect the negative battery terminal

before installing this product. Ensure that all

installation connections, especially the air

bag indicator lights, are plugged in before

reconnecting the battery or cycling the ignition

to test this product.

NOTE: Refer also to the instructions included

with the aftermarket radio.

Product Info

Product specificaties