Axxess AXABH-TY3 Handleiding

Bekijk gratis de handleiding van Axxess AXABH-TY3 (4 pagina’s), behorend tot de categorie Niet gecategoriseerd. Deze gids werd als nuttig beoordeeld door 13 mensen en kreeg gemiddeld 4.0 sterren uit 8 reviews. Heb je een vraag over Axxess AXABH-TY3 of wil je andere gebruikers van dit product iets vragen? Stel een vraag

AXABH-TY3

INSTALLATION INSTRUCTIONS

AxxessInterfaces.com © COPYRIGHT 2025 METRA ELECTRONICS CORPORATION REV. 6/20/25 INSTAXABH-TY3

TOOLS REQUIRED

• Crimping tool and connectors, or solder gun,

solder, and heat shrink

• Tape • Wire cutter • Zip ties

TABLE OF CONTENTS

Amplifier Location .................................................2

Wiring Connections ...............................................2

Amplifier Bypass Harness

Fits Select Toyota Models 2004-2015

• Vehicle-specific harness to bypass the factory amplifier

• Saves the installer unnecessary labor and wire

• 20 gauge wires

• Wire Length: 12”

Visit AxxessInterfaces.com for more detailed information about the product

and up-to-date vehicle specific applications

ATTENTION: With the key out of the ignition, disconnect

the negative battery terminal before installing this

product. Ensure that all installation connections,

especially the air bag indicator lights, are plugged in

before reconnecting the battery or cycling the ignition

to test this product.

NOTE: Refer also to the instructions included with the

aftermarket accessory before installing this device.

APPLICATIONS

Toyota

Land Cruiser (without NAV) ............................2008-2015

Amplifier Location: Under Driver seat carpet

Tundra ...............................................................2004-2013

Amplifier Location: Below Passenger’s Seat

FEATURES

Product specificaties