Axxess AXABH-TY1 Handleiding

Bekijk gratis de handleiding van Axxess AXABH-TY1 (4 pagina’s), behorend tot de categorie Niet gecategoriseerd. Deze gids werd als nuttig beoordeeld door 14 mensen en kreeg gemiddeld 4.9 sterren uit 4 reviews. Heb je een vraag over Axxess AXABH-TY1 of wil je andere gebruikers van dit product iets vragen? Stel een vraag

AXABH-TY1

INSTALLATION INSTRUCTIONS

AxxessInterfaces.com © COPYRIGHT 2025 METRA ELECTRONICS CORPORATION REV. 6/25/25 INSTAXABH-TY1

TOOLS REQUIRED

• Crimping tool and connectors, or solder gun,

solder, and heat shrink

• Tape • Wire cutter • Zip ties

TABLE OF CONTENTS

Amplifier Location .................................................2

Connections ............................................................3

Amplifier Bypass Harness

Fits Select Toyota Sienna Models 2004-2014

• Amplifier bypass harness

• Vehicle-specific harness to bypass the factory amplifier

• Allows loose wires to wire to an aftermarket amplifier

• Saves the installer unnecessary labor and wire

Always verify speaker output by testing with a tone generator, or similar device before making

connections. The output locations follow the manufacturers’ terminology for the speakers.

Visit AxxessInterfaces.com for more detailed information about the product and up-to-date

vehicle specific applications

APPLICATIONS

Toyota

Sienna (Amplified) .........................2004-2014

INTERFACE FEATURES

ATTENTION: With the key out of the ignition, disconnect

the negative battery terminal before installing this

product. Ensure that all installation connections,

especially the air bag indicator lights, are plugged in

before reconnecting the battery or cycling the ignition

to test this product.

NOTE: Refer also to the instructions included with the

aftermarket accessory before installing this device.

Product specificaties