Axxess AXABH-FD1 Handleiding

Bekijk gratis de handleiding van Axxess AXABH-FD1 (4 pagina’s), behorend tot de categorie Niet gecategoriseerd. Deze gids werd als nuttig beoordeeld door 3 mensen en kreeg gemiddeld 4.4 sterren uit 2 reviews. Heb je een vraag over Axxess AXABH-FD1 of wil je andere gebruikers van dit product iets vragen? Stel een vraag

CAUTION!

All accessories, switches, climate

controls panels, and especially air bag indicator

lights must be connected before cycling the

ignition. Also, do not remove the factory radio

with the key in the on position, or while the

vehicle is running.

AXABH-FD1

INSTALLATION INSTRUCTIONS

AxxessInterfaces.com © COPYRIGHT 2025 METRA ELECTRONICS CORPORATION REV. 6/06/25 INSTAXABH-FD1

TOOLS REQUIRED

• Crimping tool and connectors, or solder gun,

solder, and heat shrink

• Tape • Wire cutter • Zip ties

TABLE OF CONTENTS

Amplifier locations ................................................2

Connections ............................................................3

APPLICATIONS

FORD

Edge (Sony

®

or non-amplified)...................2011-2018

Escape ...........................................................2015-2019

Expedition (Sony

®

or non-amplified) ........2015-2017

Explorer (Sony

®

or non-amplified) ............2011-2019

F-150 (Sony

®

or non-amplified) .................2014-2016

Super Duty (Sony

®

or non-amplified) ................2019

Flex ................................................................2013-2019

Focus .............................................................2012-2019

Fusion ..........................................................2013-2020

Taurus ...........................................................2013-2019

Refer to the following pages for the vehicle specific instructions for wiring connections. Wiring connections vary per vehicle. Please note that

there are (2) different wiring harnesses included, and the instructions for each harness will be listed.

If it’s uncertain whether the vehicle contains a specific speaker or not, test the wires with a tone generator, or check to see if the factory wires

are populated on the vehicle side. Alternatively, the wires can be tested for impedance with a multimeter.

Amplifier Bypass Harness

Fits Select Ford Models 2011-2020

FEATURES

• Vehicle-specific harness to bypass the factory amplifier

• Saves the installer unnecessary labor and wire

• 20 gauge wires

• Wire Length: 12”

Visit AxxessInterfaces.com for more detailed

information about the product and up-to-date

vehicle specific applications.

Product specificaties