Axxess AXABH-CH4 Handleiding

Bekijk gratis de handleiding van Axxess AXABH-CH4 (8 pagina’s), behorend tot de categorie Niet gecategoriseerd. Deze gids werd als nuttig beoordeeld door 5 mensen en kreeg gemiddeld 5.0 sterren uit 2 reviews. Heb je een vraag over Axxess AXABH-CH4 of wil je andere gebruikers van dit product iets vragen? Stel een vraag

AXABH-CH4

INSTALLATION INSTRUCTIONS

AxxessInterfaces.com © COPYRIGHT 2025 METRA ELECTRONICS CORPORATION REV. 06/06/25 INSTAXABH-CH4

TOOLS REQUIRED

• Crimping tool and connectors, or solder gun,

solder, and heat shrink

• Tape • Wire cutter • Zip ties

TABLE OF CONTENTS

Amplifier locations ................................................2

Connections

22-Pin Harness ................................................3-6

10-Pin Harness ....................................................7

APPLICATIONS

Chrysler

300 ...........................2015-2023

Pacifica .....................2017-2022

Dodge

Challenger ...............2015-2023

Charger ....................2015-2023

Durango ...................2021-2022

Viper..........................2015-2017

Voyager ............................2022

Jeep

Cherokee..................2014-2020

Compass ...........................2022

Gladiator .................2020-2024

Grand Cherokee ..........2014-2022

Wrangler JL .............2018-2024

Ram

Ram 1500 (exclude Classic) ..2022

Ram 2500 (exclude Classic) ..2022

Ram 3500 (exclude Classic) ..2022

* Excluding Jeep Wrangler

ATTENTION: With the key out of the ignition,

disconnect the negative battery terminal

before installing this product. Ensure that all

installation connections, especially the air

bag indicator lights, are plugged in before

reconnecting the battery or cycling the

ignition to test this product.

NOTE: Refer also to the instructions included

with the aftermarket accessory before

installing this device.

Refer to the following pages for the vehicle specific instructions for wiring connections. Wiring connections vary per vehicle. Please note that

there are (2) different wiring harnesses included, and the instructions for each harness will be on a different page.*

If it’s uncertain whether the vehicle contains a specific speaker or not, test the wires with a tone generator, or check to see if the factory wires

are populated on the vehicle side. Alternatively, the wires can be tested for impedance with a multimeter.

Amplifier Bypass Harness

Fits Select Chrysler Models 2014-UP

FEATURES

• Vehicle-specific harness to bypass the factory amplifier

• Saves the installer unnecessary labor and wire

• 20 gauge wires

• Wire Length: 12”

Visit AxxessInterfaces.com for more detailed

information about the product and up-to-date

vehicle specific applications.

Product specificaties