AXESS AXSUB-FD3 Handleiding

Bekijk gratis de handleiding van AXESS AXSUB-FD3 (4 pagina’s), behorend tot de categorie Niet gecategoriseerd. Deze gids werd als nuttig beoordeeld door 13 mensen en kreeg gemiddeld 4.4 sterren uit 3 reviews. Heb je een vraag over AXESS AXSUB-FD3 of wil je andere gebruikers van dit product iets vragen? Stel een vraag

INSTALLATION INSTRUCTIONS

AXSUB-FD3

AxxessInterfaces.com © COPYRIGHT 2024 METRA ELECTRONICS CORPORATION REV. 3/5/24 AXSUB-FD3

• AXSUB-FD3 interface

• AXDSPX-FD3 vehicle T-harness (LD-DSP-FD3)

• Bass knob (LD-BASSKNOB)

INTERFACE FEATURES

FORD (Add a SUB) Interface

2018-UP

Visit AxxessInterfaces.com for more detailed informaon

about the product and up-to-date vehicle specic applicaons

INTERFACE COMPONENTS

•

Can be used in non-amplified models only

• Easy behind the radio installation with pre-wired harness

• Bass knob included for level control of subwoofer amp

• Micro-B USB updatable

www.AxxessInterfaces.com

www.MetraOnline.com

MetraOnline.com may be used to assist with

dash assembly instructions. Simply enter your

Year, Make, Model vehicle into the vehicle fit

guide and look for the Dash Kit Installation

Instructions.

If the vehicle is equipped with Active noise

cancelation (ANC) microphones, they will

need to be bypassed. Please refer to www.

Axxessinterfaces.com for ANC bypass

harnesses offered for select

vehicles.

TOOLS REQUIRED

TABLE OF CONTENTS

Connections.................................................................2

Programming..............................................................3

Testing..........................................................................3

Specifications...............................................................3

Troubleshooting..........................................................4

ATTENTION: With the key out of the ignition,

disconnect the negative battery terminal before

installing this product. nsure that all installation

connections, especially the air bag indicator

lights, are plugged in before reconnecting

the battery or cycling the ignition to test this

product.

NOTE: Refer also to the instructions included

with the aftermarket radio.

• Crimping tool and connectors, or solder gun,

solder, and heat shrink • Tape • Wire cutter

• Zip ties • Multimeter

*

*

Product specificaties