AXESS 99-7390B Handleiding


Bekijk gratis de handleiding van AXESS 99-7390B (16 pagina’s), behorend tot de categorie Niet gecategoriseerd. Deze gids werd als nuttig beoordeeld door 21 mensen en kreeg gemiddeld 5.0 sterren uit 11 reviews. Heb je een vraag over AXESS 99-7390B of wil je andere gebruikers van dit product iets vragen? Stel een vraag

Pagina 1/16
Metra. The World’s Best Kits.® MetraOnline.com © COPYRIGHT 2019 METRA ELECTRONICS CORPORATION REV. 9/14/22 INST99-7390B
I N S TA L L AT I O N I N S T R U C T I O N S
99-7390B
Attention! With the key out of the ignition,
disconnect the negative battery terminal
before installing this product. Ensure that all
installation connections are secure before
cycling the ignition to test this product.
KIT COMPONENTS
• A) Radio trim panel • B) Radio brackets • C) Pocket • D) Climate display • E) (2) #8 x 3/8” Phillips screws • F) Wiring harness (not shown)
A CB D
E
TOOLS REQUIRED
• Panel removal tool • Phillips screwdriver
• Pick tool
TABLE OF CONTENTS
Dash Disassembly ...............................................2-3
Kit Preparation ...................................................4-6
Kit Assembly ..........................................................7
Wiring Instructions ........................................... 8-15
WIRING & ANTENNA CONNECTIONS
Wiring Harness: Interface and harness included
Antenna Adapter: Included with kit
Steering wheel control interface: Included with kit
12v to 6v camera step-down: included with kit
KIT FEATURES
Kia Sportage (with auto climate control and factory amplifier)
2017-2019
Visit for more detailed information about the product and up-to-date vehicle MetraOnline.com
specific applications
ISO DDIN radio provision
ISO DIN radio provision with pocket
Integrated electronics with laser
etched graphics retain the factory
climate control display features.
Retains factory steering wheel
controls and back up camera.
• Painted scratch resistant matte black.
386.257.1187
|
MetraOnline.com
2
DASH DISASSEMBLY
1. Unclip and slide the top of the center
console back slightly. (Figure A)
2. Unclip and remove the panel on the
end of the passenger side of the dash,
then remove (1) Phillips screw exposed.
(Figure B)
3. Unclip the panel above the glove box.
Unplug the passenger airbag light, then
remove the panel. (Figure C)
4. Remove (2) Phillips screws securing the
radio display and a/c vent panel, then
unclip and remove the panel. (Figure D)
Continued on the next page
(Figure A) (Figure C)
(Figure B) (Figure D)
REV. 9/14/2022 INST99-7390B 3
(Figure E) (Figure G)
(Figure F) (Figure H)
DASH DISASSEMBLY (CONT.)
5. Remove (4) Phillips screws securing the
radio. Slide the radio out, then unplug
and remove the radio. (Figure E)
6. Remove (3) Phillips screw securing the
climate control panel. (Figure F)
7. Remove (1) Phillips screw securing the
lower right side drivers knee bolster.
Unsnap the bolster just enough to
access the (1) Phillips screw securing the
climate control panel, then remove the
screw. (Figure G)
8. Unclip the climate/radio control panel
from the dash, unplug the connectors,
then remove the panel. (Figure H)
Continue to Kit Preparation


Product specificaties

Merk: AXESS
Categorie: Niet gecategoriseerd
Model: 99-7390B

Heb je hulp nodig?

Als je hulp nodig hebt met AXESS 99-7390B stel dan hieronder een vraag en andere gebruikers zullen je antwoorden