AXESS AXAC-CH5 Handleiding


Bekijk gratis de handleiding van AXESS AXAC-CH5 (16 pagina’s), behorend tot de categorie Niet gecategoriseerd. Deze gids werd als nuttig beoordeeld door 127 mensen en kreeg gemiddeld 4.7 sterren uit 64 reviews. Heb je een vraag over AXESS AXAC-CH5 of wil je andere gebruikers van dit product iets vragen? Stel een vraag

Pagina 1/16
AXAC-CH5
INSTALLATION INSTRUCTIONS
AxxessInterfaces.com © COPYRIGHT 2024 METRA ELECTRONICS CORPORATION REV. 7/25/24 INSTAXAC-CH5
ATTENTION: With the key out of the ignition,
disconnect the negative battery terminal before
installing this product. Ensure that all installation
connections, especially the air bag indicator lights,
are plugged in before reconnecting the battery or
cycling the ignition to test this product.
NOTE:
Refer also to the instructions included with the
aftermarket accessory before installing this device.
INTERFACE FEATURES
TOOLS REQUIRED
INTERFACE COMPONENTS
REQUIRED ITEMS
TABLE OF CONTENTS
Introduction ...........................................................2
Configuration ..................................................... 2-4
Connections ............................................................5
Installation .............................................................6
Programming .........................................................6
Rebooting the U-Connect Radio ..........................7
(4) Camera inputs
Reverse signal trigger generated
via CAN bus communication of
the vehicle
(4) Programmable camera control wires
Turn signal trigger generated via CAN bus communication of
the vehicle
Micro-B USB updatable
• Crimping tool and connectors, or solder gun,
solder, and heat shrink • Tape • Wire cutter
• Zip ties
• AXAC-CH5 interface
• AXAC-CH5 interface harness
• AXAC-CH5 vehicle harness
Update Cable: AXUSB-MCBL (sold separately)
Axxess Updater Program
*
With 8.4-inch U-Connect radio
Dodge/Jeep/Ram* Camera Interface With
Pre-Wired
Harness
2013-Up
APPLICATIONS
Dodge
Challenger .....................2015-Up
Charger ..........................2015-Up
Durango ......................... 2014-Up
Jeep
Grand Cherokee ............2014-Up
RAM
1500 (DS chassis code) .......2019
1500 .............................2013-2018
2500 ............................ 2013-2018
3500 ............................ 2013-2018
Note: Only compatible with NTSC cameras.
Visit AxxessInterfaces.com for more detailed information
about the product and up-to-date vehicle specific applications
2
CONFIGURATION
Download and install the Axxess Updater available at: AxxessInterfaces.com
Connect the AXUSB-MCBL update cable (sold separately) between the interface and the computer.
The cable will connect into the micro-B USB port in the interface.
Open the Axxess Updater and wait until the word Ready is listed in the bottom left of the screen.
• Select Add-Cam Configuration.
Continued on the next page
INTRODUCTION
The AXAC-CH5 is a camera switching interface that provides up to (3) additional camera inputs
to the factory radio, while still retaining the factory camera. With this interface a front camera,
and/or side cameras, can be added to the factory radio. The cameras function automatically, no
human interaction required, unless desired to do so. The interface can also be used if the vehicle
doesn’t come equipped with a backup camera, adding up to (4) cameras in this scenario. Axxess
recommends cameras from the iBEAM product line for best results.


Product specificaties

Merk: AXESS
Categorie: Niet gecategoriseerd
Model: AXAC-CH5

Heb je hulp nodig?

Als je hulp nodig hebt met AXESS AXAC-CH5 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Niet gecategoriseerd AXESS

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd

Beper

Beper 90.071 Handleiding

14 September 2025
Qoltec

Qoltec 50685 Handleiding

13 September 2025
70mai

70mai X200 Omni Handleiding

13 September 2025
Alluserv

Alluserv VL2020S Handleiding

13 September 2025
VOREL

VOREL 80308 Handleiding

13 September 2025
VOREL

VOREL 80307 Handleiding

13 September 2025
K&K Sound

K&K Sound M8000 Handleiding

13 September 2025
Maginon

Maginon RAG-1 Handleiding

13 September 2025